1/8th scale Serpent F180 Ready to race kit. Fully Assembled race car, this F180 is supplied in a high quality carry case and comes with a Mega FT-28 engine, exhaust system, radio equipment, starter, fuel bottle and body shell.
Requires the body to be painted, a glow starter, fuel, 8 x 1.2V AA and 1 x 6-cell 7.2v stick pack.
#1070 | Grommet rubber soft (4) High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes. | View product >>> |
#1092 | Shims 18x12x0.3 (10) | View product >>> |
#1111 | Pin NRA 3x13.8 (4) Set of 4 steel pins size 3x13.8mm | View product >>> |
#1115 | Pin NRA 5x5 (4) Set of 4 steel pins size 5x5mm | View product >>> |
#1493 | Pressure nipple M3 (4) | View product >>> |
#1637 | Universal adjustable brake-set | View product >>> |
#1650 | Pivotball 5.8mm (4) Pivotball 5.8mm (4) | View product >>> |
#301004 | Chassis plate 7075 T6 Anodised chassis plate for Serpent F180. Made from high grade 7075 T6 aluminium. | View product >>> |
#301005 | Top deck carbon Carbon fibre top deck. | View product >>> |
#301008 | Battery pack 5 cell battery pack. | View product >>> |
#301009 | Pipe mount wire Exhaust pipe mounting wire. | View product >>> |
#301010 | Front Wing Nylon Black Nylon front wing for the Serpent F180. | View product >>> |
#301012 | Front Suspension set Nylon Front Suspension set for F180. Contains 2 lower front wishbones, 2 upper front wishbones and 2 steering blocks. | View product >>> |
#301013 | Front Wishbone set (2+2) Complete front wishbone set, includes 2 front upper wishbones and 2 front lower wishbones. | View product >>> |
#301014 | Steering Block L+R Set of left and right composite steering blocks. | View product >>> |
#301015 | Drive shaft Front (2) A pair of front drive shafts for the Serpent F180. | View product >>> |
#301016 | Wheel axle Front (2) A pair of front wheel axles. | View product >>> |
#301017 | Wheel Nut (4) A set of 4 aluminium wheel nuts. | View product >>> |
#301019 | Central front bracket alu Machined and anodised aluminium front central bracket for Serpent F180. | View product >>> |
#301022 | Anti-roll bar shaft front Front aluminium anti-roll bar shaft. | View product >>> |
#301023 | Anti-Roll bar adaptors alu (2) A pair of aluminium front Anti-Roll bar adaptors. | View product >>> |
#301024 | Pushrod rocker alu (2) A pair of aluminium pushrod rockers. | View product >>> |
#301027 | Shock bracket nylon front lower Front lower nylon shock bracket. | View product >>> |
#301028 | Steering servo lever 23T/24T/25T Steering servo levers for different Servo types 23T/24T/25T | View product >>> |
#301029 | Shock bracket nylon front upper Front upper nylon shock bracket. | View product >>> |
#301030 | Brake cup FR steel (2) Pair of steel front brake cups. | View product >>> |
#301031 | Brake Activator Composite brake activator for F180. | View product >>> |
#301032 | Brake Driver with steel pins A pair of brake drivers with steel pins. | View product >>> |
#301033 | Brake wire assembly Brake wire assembly for Serpent F180. | View product >>> |
#301035 | Central rear bracket Machined and anodised aluminium rear central bracket for Serpent F180. | View product >>> |
#301036 | Bearing block rear left & right Pair of left and right rear bearing blocks. | View product >>> |
#301037 | Suspension bracket rear left / right Composite rear suspension brackets for left & right of Serpent F180. | View product >>> |
#301038 | Back plate nylon Nylon back plate. | View product >>> |
#301040 | Wishbones Rear (2+2) Rear wishbone set for the F180. Contains 2 lower rear wishbones and 2 upper rear wishbones. | View product >>> |
#301041 | Pivot pins upper (4) A set of 4 upper rear pivot pins. | View product >>> |
#301042 | Wheel axle Rear (2) A pair of rear wheel axles. | View product >>> |
#301045 | Body support bracket rear carbon Rear 3mm carbon body support bracket. | View product >>> |
#301046 | Body post rear alu (2) A pair of rear aluminium body posts. | View product >>> |
#301047 | Brake Lever Composite brake lever and insert for Serpent F180. | View product >>> |
#301048 | Carbon brake pad support plate Carbon brake pad support plate. | View product >>> |
#301049 | Brake Eccenter Composite brake eccenter for F180. | View product >>> |
#301053 | Pulley 23T Composite 23T pulley for the Serpent F180. | View product >>> |
#301054 | 2-speed layshaft 2-speed layshaft for Serpent F180. | View product >>> |
#301062 | Centax Flywheel F180 Centax II Flywheel for Serpent F180. | View product >>> |
#301063 | Gear Differential rear 50T Rear 50T Gear Differential. | View product >>> |
#301064 | Gear diff case / pulley L & R Composite gear differential case set with pulley. | View product >>> |
#301065 | Outdrives Gear diff (2) A pair of Gear diff outdrives. | View product >>> |
#301066 | Wing rear nylon parts Complete rear wing set, includes all the composite parts. | View product >>> |
#301067 | Diffuser Nylon Nylon rear diffuser for the Serpent F180. | View product >>> |
#301068 | Bracket rear wing alu (2) A pair of aluminium rear wing brackets. | View product >>> |
#301071 | Wheel front black (2) Pair of front wheels for use with the F180 rubber tires. | View product >>> |
#301072 | Wheel rear black (2) Pair of rear wheels for use with the F180 rubber tires. | View product >>> |
#301077 | Throttle servo lever 23T/24T/25T Throttle servo levers for 3 different servos 23T/24T/25T | View product >>> |
#301078 | Cable holder Anodised aluminium cable holder. | View product >>> |
#301079 | Suspension pivot balls steel (4) A set of 4 steel suspension pivot balls. | View product >>> |
#301080 | Battery Case Composite Battery holder. | View product >>> |
#301082 | Throttle receiver mount Composite throttle servo and receiver / antenna mount for Serpent F180. | View product >>> |
#301098 | Body-post front alu Aluminium front body post. | View product >>> |
#301099 | Bushing Rocker (2) A pair of aluminium rocker bushings. | View product >>> |
#301101 | Brake pin 3x10 (4) A set of 4 brake pins 3x10 | View product >>> |
#301104 | Rotostart System Hand held Rotostart system for the F180 as well as other engines that use the Rotostart system. Come supplied with the starting shaft. | View product >>> |
#301902 | Tyre front grooved FC2 med (2) Pair of front grooved rubber tyres for the Serpent F180. | View product >>> |
#301907 | Tyre rear grooved RC2 med (2) Pair of rear grooved rubber tyres for the Serpent F180. | View product >>> |
#301951 | Inserts front foam FF1 black (2) Pair of black front foam inserts for the F180. | View product >>> |
#6503 | Cone flywheel 7mm long (3) Universal flywheel cone, set of 3. | View product >>> |
#6571 | Engine mounts c.s.h. screws (4) Set of c.s.h. screws M5x12 and alu. countersunk washers. Used with Vector and Impact engine mounts. | View product >>> |
#6582 | Centax clutchnut Replacement parts for Centax clutch system. | View product >>> |
#6583 | Centax pre-load adjusting nut Replacement parts for Centax clutch system. | View product >>> |
#6584 | Centax spring cup Replacement parts for Centax clutch system. | View product >>> |
#6587 | Centax clutch shoe black Graphite Centax clutch shoe, provides softer engaging of the clutch than the yellow type (6587N). Mainly used in 1/10 scale racing. | View product >>> |
#802403 | 2-speed spring (2) Pair of gearbox tension springs for use in the Serpent gearbox. | View product >>> |
#802605 | Gear-axle set 4+2+2 Gear axle set for the optional rear gear differential. Contains 2 large gears, 4 satellite gear, 2 gear axles and 4 shims. | View product >>> |
#802608 | Spares set geardiff (15) Spares set for optional rear gear diff. Contains 4 fastening screws, 1 large O-ring, 2 small o-rings, 2 roll pins and 6 shims. | View product >>> |
#803198 | Adjusting nut nylon for 8.5mm ball (10) Set of 10 nylon end play adjusting nuts for use with the cars 8.5mm pivot balls. | View product >>> |
#808346 | Pivot-balls 8.5mm (2) Universal pivot balls. Used in all Impulse, Impact 2 / M2 and Vector models on front and rear suspension. | View product >>> |
#901235 | Push-rods 54mm shocks Tie-rods 54mm, heat treated steel. Left and right threaded. Used as pushrods on front and rear suspension, between lower suspension arm and rockers+D51. Set of 2. | View product >>> |
#901355 | Brake pads, set of 4 Brake pads, made of special friction material, blue. Must be glued onto steel brake plates 901356. Set of 4. | View product >>> |
#901356 | Steel brake plates VETEQ brake plates made of spring steel. Interchangeable with Vector, Impact and Impulse brake plates. Old style Vector and Impact brake plates (9602) cannot be used on VETEQ. Set of 2. | View product >>> |
#902128 | Track-rod steel 1/8 (2) Track rod set for Serpent 1/8 in Serpent spring steel. | View product >>> |
#902133 | Servo-saver shaft inner Steel shaft upon which the Serpent 950 servo saver pivots. | View product >>> |
#902134 | Servo-saver shaft outer Aluminium Serpent 950 servo saver shaft with thread for servo saver pre load adjusting nut. | View product >>> |
#902135 | Servo-saver nut Aluminum Serpent 950 servo saver pre load adjusting nut. | View product >>> |
#902136 | Servo-saver spring Servo saver spring for centrally mounted Serpent 950 servo saver. | View product >>> |
#902137 | Servo saver spring 2.0 gold Serpent 950 servo saver spring. Slightly softer than the standard 2.1mm silver spring. | View product >>> |
#902138 | Trackrod M3x23 (2) Trackrod M3x23 (2) | View product >>> |
#902139 | Servo saver spring 2.2 black Serpent 950 servo saver spring. Slightly harder than the standard 2.1mm silver spring. | View product >>> |
#902308 | Pivot pins 3.5 lower rear (2) Set of 2 3.5mm diameter lower rear pivot pins. Made from special spring steel. | View product >>> |
#902410 | 2-speed gearbox LC (no shaft incl) Complete LC gearbox set for use with all Serpent cars. Requires the cars respective LC gearbox shaft to be mounted. | View product >>> |
#902411 | Drive-flange alu with owb Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
#902412 | Adaptor 2-speed LC Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing. | View product >>> |
#902413 | Carrier 2nd Gear LC Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox. | View product >>> |
#902416 | 2-speed shoe-set LC II A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only. | View product >>> |
#902444 | 2-speed gear 44T (2ND) LC Composite 44T 2nd gear for use with new LC Gearbox. | View product >>> |
#902445 | 2-speed gear 45T (2ND) LC Composite 45T 2nd gear for use with new LC Gearbox. | View product >>> |
#902446 | 2-speed gear 46T (2ND) LC Composite 46T 2nd gear for use with new LC Gearbox. | View product >>> |
#902447 | 2-speed gear 47T (1ST) LC 47T composite 1st gear for new LC gearbox. | View product >>> |
#902448 | 2-speed gear 48T (1ST) LC 48T composite 1st gear for new LC gearbox. | View product >>> |
#902449 | 2-speed gear 49T (1ST) LC 49T composite 1st gear for new LC gearbox. | View product >>> |
#903125 | Upright RR Rear composite upright for use on the Serpent 960. Suitable for both the left and right side of the car. | View product >>> |
#903126 | Spacer upright alu (2) Pair of rear upright spacers for use on the wheel axles. | View product >>> |
#903135 | Mount-supports servo Full set of servo mount supports. | View product >>> |
#903156 | Driveshaft rear 62mm (2) Pair of 2 Hudy spring steel driveshafts for the rear of the Serpent 960. | View product >>> |
#903164 | Shock-set RCC front (2) Complete pre assembled short RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touring cars. | View product >>> |
#903166 | Shock rod short (2) A set of 2 short shock rods for use in RCC shocks. | View product >>> |
#903168 | Nylon parts frame shocks RCC Complete set (4) of composite RCC shock absorber components. | View product >>> |
#903169 | Insert shock (2) A set of 2 RCC composite shock absorber inserts. New: Use 903336 and 903332 instead | View product >>> |
#903171 | O-ring 10x1 (4) Set of 4 o-rings for use in the RCC shock absorbers. | View product >>> |
#903175 | Foam insert (4) Set of 4 foam inserts for use in the RCC shock absorbers. | View product >>> |
#903177 | Nut shock alu (2) Set of 2 anodised aluminium shock absorber nuts. Suitable for the RCC shock absorbers. | View product >>> |
#903186 | C + G Clip + washer RCC shocks (12) Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks. | View product >>> |
#903200 | O-ring 3.3 x 1.5 RCC shocks (10) Set of 10 purple o-rings for use in the RCC shock absorbers. | View product >>> |
#903212 | Centax support disk alu SPP Aluminium support disk for use in the Centax and Centax II. | View product >>> |
#903333 | X-ring RCC 2009 Shock (10) X-Ring for the 2009 RCC Shock | View product >>> |
#903334 | Shock-set RCC-X short (2) Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
#903335 | Shock-set RCC-X long (2) Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
#903336 | 903336 Insert RCC 2009 shock (2) Shock bottom for the X-Ring for the 2009 RCC shock | View product >>> |
#909224 | Wheel axle shims (2) Set of 2 shims 12x18x0.3mm to protect wheel axle bearings. | View product >>> |
#909336 | Rear anti-roll bar blade (conical) Replacement blade for adjustable rear anti-roll bar. | View product >>> |
#909373 | Drive-belt Kevlar 8mm Kevlar reinforced timingbelt for rear transmission of Vector all Specs. Width 8mm. | View product >>> |
#909510 | Centax-II clutch-set (excl. Flywheel) Complete Centax-II clutch set with everything needed to mount it to your engine with the exception of the flywheel. All bearings, shoes, shims and a bell housing with a 16/19 gear ratio is supplied. | View product >>> |
#909512 | Centax-II clutch-housing universal Ultra strong spring steel Centax-II clutch bell housing. | View product >>> |
#909514 | Centax II bearing spacer 5x7 Aluminium spacer for use in the Centax-II clutch system. | View product >>> |
#909515 | Centax II centrifugal shoes (3) A set of 3 carbon flyweights for use in both Centax-I & II clutch systems. | View product >>> |
#909516 | Centax II Spacer Thrustbearing Sapcer for use with Centax-II clutch system. Comes complete with screw. | View product >>> |
#909518 | Centax coilspring 1.8 1.8mm diameter spring steel coil spring for use with the Centax-I and Centax-II clutch systems for use with 3.5cc/.21 engines. A softer version is also available (#6586). Replaced by #909520 | View product >>> |
#909519 | Centax II shims 5 x 10 x 0.3 (2) + 0.5 (1) Set of 3 Centax-II shims in two sizes 0.3 (2) and 0.5 (1). | View product >>> |
#909520 | Centax II / III spring 1.8 (10mm) Optional 10mm Centax II spring. | View product >>> |
#909555 | Centax gear-pinion alu 15t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
#909556 | Centax gear-pinion alu. 16t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
#909558 | Centax gear-pinion alu. 18t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
#909559 | Centax gear-pinion alu. 19t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
#909560 | Centax gear-pinion alu. 20t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
#9611 | Steel brake disks (2) MK-2 Brake discs for all 1/8 and 1/10 scale Serpent cars. Set of 2. | View product >>> |