Brand:

Serpent

Product Type:

Electric Cars > 1/10 190mm

Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the successful 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted body, Dragon-RC electronic speedo, Dragon-RC brushless 9T motor, Dragon-RC DTS-3 2.4ghZ transmitter. The full package to start racing in the electric touringcar category or just race anywhere for fun.

Related products

• - Serpent S411 190mm Sport (#400006)
• - Serpent S411 FF 1/10 EP 2wd (#400009)
• - Serpent S411 190mm Team Edition (#400012)

Serpent 411 Ready-To-Race ; features

Chassis
Supernarrow, symmetrical , durable black glass-fibre  chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.

Transmitter / receiver / servo
- Dragon-RC DTS-3 digital 2.4 gHz transmitter
- Dragon-RC digital receiver in 2.4 gHz
  http://www.dragon-rc.com/product/210013/transmitter-set-dts-3.html

- Dragon-Rc digital servo 0.13s - 6kg
  http://www.dragon-rc.com/product/210004/servo-digital-0-13s-6-5kg-0352.html

Electronics

The 411 RTR comes with
- Dragon-RC electronic 45A speedcontroller
  http://www.dragon-rc.com/product/211009/speedo-dx-10-wp-45a-with-fan-waterproof.html

- Dragon-RC brushless motor 9T 3000 kv, non sensored
  http://www.dragon-rc.com/product/211004/motor-brushless-dl10-9t-3000kv.html

Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.

Tyres-wheels
The 411-RTR is fitted with Dragon-RC rubber racing tyres with foam inlays on Serpent TC wheels for super-grip.

Body:
The EFRA approved  1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in a superb paintjob with 4 colors.

Shockabsorbers
Latest type RCM  competition shockabsorbers  with membrames and checked colorcoded race springs.

Transmission / belts / pullies
Smooth low friction fine pitch  belts combined with optimised nylon pullys
 
Driveshaft / wheelhex / wheelaxle
Steel driveshafts, combined with ballraced wheelaxles  and nylon wheel-hex adaptors

Steering  system
Steering system with  optimised ackermann for neutral steering-feeling.

Spool
Front nylon lightweight spool with screw mounted front gearpully

Gear-diff
Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.

Bumper
Large foam front bumper captured by a upper and lower nylon bumper

Bodymount
Front bodymount is mounted trhrough the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from.

Motormount
Machined aluminium  motormount  / middle shaft support.

Middle shaft
Ballraced middle shaft  with 2 small pully’s and  the main Serpent spur gear.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with  3.0 RR RR and split type  0.0 blocks RR FR

Rear suspension
Durable lower rear  wishbones connected to the inner brackets with strong steel pivot pins.  An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.

Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins.  An anti-roll bar system can be mounted as option.

C-hub / steeringblock
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter

Front bracket
Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

Shocktower rear
Black glass fibre  shocktower with  4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.

Shocktower front
Black glass fibre  shocktower with  3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.

Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and  Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

The Serpent 411 Ready-to-race offers a complete package to enjoy running anywhere outdoors on even surfaces / parkinglots or even join any indoor or outdoor race.

Team Serpent

Manual and decals:
Full color owners manual with info on car and electronics, has all exploded views  for easy parts-finding and  detailed list with spare parts and optionals.  Decal-sheet with Serpent and 411 logo’s are included as well.

Packing
The 411 RTR comes in a strong carton box with full color printing.

Optionals / upgrading
The Serpent 411 Sport is based on the high end race version of the 411.  All parts from the 411 race-version and also all optionals, alsof fit  the  411 Sport.  This allows you to upgrade your  411 Sport  to a higher level race spec step by step, with the parts  you  select.  The 411 Sport parts manual  shows those parts, and you can find them in the optionals section of the 411 Sport as well.