> Serpent 710 4WD (#802000) - DISCONTINUED
- Brand:
- Serpent
Product Type:- Gas Cars > 1/10 200mm
All new 200mm chassis, the Serpent 710 represents the highest levels in quality, performance, drivability and usability. Serpent - Performance through Evolution
View: Text | Images
> Optional parts
| #1018 | Screw-flanged M4x14 allen (4) High quality flanged screw in size M4x14 to fasten the front part of the S950 radioplate and to use as engine mounting screws in the chassis of the 200mm cars | View product >>> |
| #1094 | Shim-set 3x6x0.1mm (10) Special shims used to minimize play of front and rear wishbones of all cars using 3mm hinge-pins. Set includes 10 shims of 0.1mm. | View product >>> |
| #1378 | Balls ceramic coated (12) Ultra hard coated 3.9mm diameter ceramic balls for use in the ball differential of the Serpent 710. Comes in a pack of 12. | View product >>> |
| #1388 | Thrust bearing 5x10 Ceramic 5x10 thrust bearing with ceramic balls. Ligther and more durable with perfect run-ways. A direct replacement for the standard thurst-bearing, to be used in Centax-3 clutch system. | View product >>> |
| #1521 | Silicone tubing 2x5x50 purple 50cm length of purple coloured fuel tubing. | View product >>> |
| #1522 | Silicone tubing 2x5x50 smoke 50cm length of smoke coloured fuel tubing. | View product >>> |
| #1523 | Silicone tubing 2x5x50 orange 50cm length of orange coloured fuel tubing. | View product >>> |
| #1530 | Fuel filter special Aluminium in line fuel filter for use on any gas powered rc car. | View product >>> |
| #801159 | Spacer Fuel-tank Capacity (5) Set of 5 spacers and two screws to allow you to adjust the capacity of your fuel tank. | View product >>> |
| #801173 | Battery-set 5-cell 730mA S-705-835 Complete pre made battery pack - Comes complete with plug - The pack contains 5 730Mah AAA batteries - Suitable for the Serpent 705 and 835 | View product >>> |
| #801214 | Wheelaxle Pro (2) Special light-weight wheel axle with double drive slots. Made of high-tensile and heat treated steel. Interchangeable with standard axles 801215. Fits Serpent 710 front and rear, Serpent 705 only front. | View product >>> |
| #801256 | Timingbelt 201X5mm rear Pro Pro timing belt for the Serpent 710. Soft belts are optimised for smooth running. Rear belt 201x5mm. Also fits Serpent Impulse and Serpent 705 cars. | View product >>> |
| #801345 | Brake disk steel ventilated Ventilated, steel brake disk for S705, SERPENT 710, S835, Impact, S705, Impulse cars. | View product >>> |
| #801832 | Rim 30mm slick 6SP yellow (2) Introducing the all-new Impulse wheel rim from Serpent. This stylish 6-spoke wheel is now ready for use with foam tyres. Available in both white and Serpent yellow these wheels come in 2 different widths, 26mm for the front and 30mm for the rear. | View product >>> |
| #802121 | Chassis 4mm alu. T6 Team Machined chassis plate, for lower centre of gravity. Suitable for the Serpent 710. | View product >>> |
| #802145 | Servo lever front long S710 & Diff ring Set comprising of long servo saver lever for less ackermann as well as latest diff clamping ring for use on the front S710 differential. | View product >>> |
| #802146 | Servo lever front long S710 New longer servo saver lever for less ackermann resulting in higher corner speeds and a larger steering range. | View product >>> |
| #802155 | Bracket middle shaft alu Aluminium middle bracket for Serpent 710. Comes with fastening material. | View product >>> |
| #802157 | Timingbelt 246X4mm front Pro Pro timing belt for the Serpent 710. Soft belts are optimised for smooth running. Front belt 246x4mm. | View product >>> |
| #802159 | Timingbelt 339X4mm long (side) Pro Pro timing belt for the Serpent 710. Soft belts are optimised for smooth running. Side belt 339x4mm. | View product >>> |
| #802160 | Belt-set Pro S710 (3) Full optional Pro belt set for the Serpent 710. Contains 3 (front, side and rear) soft, smooth running belts. | View product >>> |
| #802162 | Middle Shaft S710 alu coated Coated lightweight aluminium middle shaft for use on the Serpent 710/720. | View product >>> |
| #802165 | Pully adaptor alu. light (2) Set of 2 lightweight 710 pulley adaptors. Made from Aluminium they are supplied with the required grubscrews. | View product >>> |
| #802170 | Pulley / shim 19T mid-center alu Aluminium 19T mid center pulley for use on the Serpent 710. Comes supplied with grubscrew. | View product >>> |
| #802171 | Pulley/shim 21T mid side alu Aluminium 21T middle-side pulley for the Serpent 710. Comes supplied with grubscrew. | View product >>> |
| #802173 | Pulley / shim 22T mid-side alu Aluminium 22T mid-side pulley for use on the Serpent 710. Comes supplied with grubscrew. | View product >>> |
| #802202 | Shock tower front Lola carbon Serpent 710 2.5mm Carbon shock tower for use on the Serpent 710. | View product >>> |
| #802208 | Bumperplate upper LM-type S710 Upper composite bumperplate with holes for front downstops as well as 2 extra holes to mount the personal transponder. | View product >>> |
| #802209 | Bumper lower LM-type Composite lower front bumper for 1/10th scale chassis' for use with a GTP or Lola body shell. | View product >>> |
| #802210 | Bodymount-set front Lola-GTP type S710 Complete set of bumper, upper plate and shocktower for use with Lola and GTP bodies. | View product >>> |
| #802212 | Body posts adjustable front alu (2+1) Set of 3 aluminium body posts for use on front of Serpent 1/10 cars. Comes with required fastener. | View product >>> |
| #802220 | Bracket Front upper Alu L & R Orange A set of Orange anodised aluminium front upper wishbone mounting points for the Serpent 710. | View product >>> |
| #802235 | Spacer ST block & uprights (4) Set of 4 wheel axle spacers for the Serpent 710. To be placed between the main bearings on the steering blocks and uprights, to spread ballbearing load for increased durability. | View product >>> |
| #802241 | Anti-roll bar levers Alu Aluminum anti roll bar levers. Precision machined from high quality aluminium, with a nice orange anodised finish. Suitable for the Serpent 710. | View product >>> |
| #802252 | Front shaft lock-set Set with pins and a bushings to lock the front shaft with one-way bearings very quick and easy into a solid front shaft. | View product >>> |
| #802255 | Wheel hexagon alu orange (4) Set of 4 orange anodised aluminium hex wheel adaptors for use on Serpent 200mm chassis'. Includes hex head screw for mounting. | View product >>> |
| #802337 | Anti-roll bar rear set 2.5 +3mm Complete set with 2.5mm and 3mm rear anti roll bar and all products necessary to mount to your Serpent 710. | View product >>> |
| #802338 | Anti-roll bar plate 2.5+3mm nylon | View product >>> |
| #802345 | Pulley 24T 2sp - center alu Aluminium 24T center Pulley for use on the 2 speed shaft of the Serpent 710 & 720. Comes supplied with mounting grub screw. | View product >>> |
| #802350 | CV-axles set Set of 2 high performance CVD shafts for use on Serpents range of 1/10th 200mm. | View product >>> |
| #802362 | Body posts adjustable rear alu (2) Set of 2 aluminium body posts for Serpent 1/10. Comes with fasteners. | View product >>> |
| #802387 | Diff clamp-ring 2 parts S710 New diff clamp ring set, suitable for the S710 ball differentials (front and rear). Design enables wider range to set the tension on the diff. | View product >>> |
| #802393 | Diff Adjuster alu. Pro-set Complete pro diff alu. adjuster set. Fits directly onto the Serpent 710 differential and comes complete with aluminum diff adjuster, shoe and adjuster screw. | View product >>> |
| #802394 | Diff-set shoe Pro Spare shoe for use with the Pro diff-set. | View product >>> |
| #802509 | Centax-3 clutch shoe yellow New material clutch shoe for use with the Centax-3 clutch system. Increased friction coefficient to handle high-power engines. | View product >>> |
| #802516 | Centax - 3 gear-pinion alu. 16T Aluminum 16T Centax 3 1st gear pinion. | View product >>> |
| #802518 | Centax - 3 gear - pinion alu. 18T Aluminum 18T Centax 3 1st gear pinion. | View product >>> |
| #802520 | Centax-3 Gear Alu 20T Coated aluminium 20T pinion gear for use on the Centax-3. | View product >>> |
| #802521 | Centax - 3 gear - pinion alu. 21T Aluminum 21T Centax 3 2nd gear pinion. | View product >>> |
| #802523 | Centax - 3 gear - pinion alu. 23T Aluminum 23T Centax 3 2nd gear pinion. | View product >>> |
| #802552 | Engine monoblock M12 Single piece engine block machined from a single block of aluminium. Suitable for 12 size Novarossi based engines. | View product >>> |
| #802553 | Engine monoblock M12 (ME/PI) Single piece engine block machined from a single block of aluminium. Suitable for 12 size Mega/Picco based engines. | View product >>> |
| #802600 | Rear Gear Diff set (Assembled) Pre Assembled rear gear diff for the Serpent 710. | View product >>> |
| #802605 | Gear-axle set 4+2+2 Gear axle set for the optional rear gear differential. Contains 2 large gears, 4 satellite gear, 2 gear axles and 4 shims. | View product >>> |
| #802606 | Adaptor geardiff steel (2) Pair of high quality steel adaptors for the optional rear geardiff. | View product >>> |
| #802607 | Case gear diff L & R Left and rear composite gear diff casing. | View product >>> |
| #802608 | Spares set geardiff (15) Spares set for optional rear gear diff. Contains 4 fastening screws, 1 large O-ring, 2 small o-rings, 2 roll pins and 6 shims. | View product >>> |
| #802831 | Disk Set-up wheels Orange (4) A set of 4 disk setup wheels for use on the Serpent 710. Ideal for measuring camber and toe with a camber gauge. | View product >>> |
| #803166 | Bumper LeMans type Nylon, crash resistant bumper for Serpent 1/10th scale cars. Suitable for use with LeMans/GTP body shell. | View product >>> |
| #803175 | Bracket radioplate support alu Aluminium Radio plate support bracket for use on the Serpent 710. Comes with fastening screws. | View product >>> |
| #803192 | Servo Saver set adj. Ackerman 720 Composite servo saver for the Serpent 720 with optional Ackerman inserts. | View product >>> |
| #803193 | Centax-3 revision set This Centax 3 revision set contains yellow clutch shoe, flyweights, main bearings and thrust bearing. | View product >>> |
| #803194 | Spur Gear set 1/10 (6) Spur gear set for the Centax-3. Contains 1 x 55T, 1 x 56T, 1 x 57T, 1 x 59T, 1 x 60T & 1 x 61T | View product >>> |
| #803195 | Gear Pinion set 1/10 (6) Pinion gear set for the Centax-3. Contains 1 x 17T, 1 x 18T, 1 x 20T, 1 x 21T, 1 x 22T & 1 x 23T | View product >>> |
| #803197 | Bumper foam 710/720 wide Wide foam bumper for the Serpent 710 and 720. Features cut out for easier placement of a personal transponder. | View product >>> |
| #803198 | Adjusting nut nylon for 8.5mm ball (10) Set of 10 nylon end play adjusting nuts for use with the cars 8.5mm pivot balls. | View product >>> |
| #803220 | 2-speed gearbox set wc (no shaft) Complete 2 speed WC gearbox set for use on the Serpent 710, 720 and 733. Includes everything required with the exception of the 2 speed shaft. Manual can be found in the menu: I-manual under S733. | View product >>> |
| #808346 | Pivot-balls 8.5mm (2) Universal pivot balls. Used in all Impulse, Impact 2 / M2 and Vector models on front and rear suspension. | View product >>> |
| #903202 | RCC shock absorber tool Anodised aluminium tool to aid correct assembly of the RCC shock absorber. | View product >>> |
| #909410 | Shock-body alu. Teflon front (2) Optional rear shock absorber cilinders, made of hard anodized and PTFE-coated aluminium. Interchangeable with standard composite front shock. body of shock set 909400 and 909440. Used when track temperatures rise above 30 degrees. | View product >>> |
| #909411 | Shock-body alu. Teflon rear (2) Optional rear shock absorber cilinders, made of hard anodized and PTFE-coated aluminium. Interchangeable with standard composite rear shock. body of shock set 909400. Used when track temperatures rise above 30 degrees. | View product >>> |
| #909414 | Spring-set d=1.5 l=27-22.7 orange (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Soft spring-tension. Color: Orange | View product >>> |
| #909415 | Spring-set d=1.5 l=27-22.7 white (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium-soft spring-tension. Color: White | View product >>> |
| #909416 | Spring-set d=1.6 l=27-22.7 yellow (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium spring-tension. Color: Yellow | View product >>> |
| #909417 | Spring-set d=1.7 l=27-22.7 red (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium-hard spring-tension. Color: Red | View product >>> |
| #909418 | Spring-set d=1.8 l=27-22.7 blue (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Hard spring-tension. Color: Blue | View product >>> |
| #909419 | Spring-set D=1.9 L=27-22.7 purple (4) A full set of 4 Purple springs. The hardest in the Serpent range. | View product >>> |
| #909420 | Spring-Set D=2.0 L=27-22.7 grey (4) Set of 4 ultra hard, powder caoted, grey springs. | View product >>> |
| #909421 | Pre-tension springcup aluminium 1/10 (2) Aluminium pre-tension spring cups for use with your Impulse and Impact M2. | View product >>> |
| #909423 | Pre-tension springs (3 sets) Set containing 3 pairs of springs each with a different tension, for use with the pretension alu cups. The support springs are used on the rear shock-absorbers only. The springs are NOT suitable for the push-rod suspension (as Veteq). | View product >>> |
| #909446 | Shock membrame soft & Foam inserts (4) Set of 4 soft shock membranes and 4 foam inserts for use with Serpents 4 step shock absorbers. | View product >>> |
| #909597 | Centax endplay tool Anodised aluminium Centax endplay tool. Also can be used to hold the flywheel from rotating when tightening the flywheel nut. Check www.Xceedrc.com | View product >>> |
| #9607 | Race brakepad-set L + R (type A) Complete set of steel brake-plates with a special type of pre-mounted brake-liner. Fits all Serpent cars. After rigorous testing we found this brake liner compound maintains a very high coefficient of friction under all sorts of conditions. It needs limited time to heat up and then stays very stable. You never need to glue brake pads again!. The liners are mounted onto the plates in an industrial oven and then ground to the correct thickness. | View product >>> |
News