All new 200mm chassis, the Serpent 710 represents the highest levels in quality, performance, drivability and usability. Serpent - Performance through Evolution
#1019 | Screw-flanged M4 x 25 hex (4) Pack of 4 hex head M4 x 25 flanged screws. | View product >>> |
#1065 | O-rings alu front axle (10) | View product >>> |
#1070 | Grommet rubber soft (4) High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes. | View product >>> |
#1093 | Centax 5x8 shim-set 0.1 (2) 0.3 (1) Special shims to adjust end-play on the Centax clutch housing. Shims are used on the outside of the thrust-bearing bushing. Set includes 2 shims of 0.1mm and 1 shim of 0.3mm. | View product >>> |
#1292 | Spring washer 6.2X14X0.9 | View product >>> |
#1311 | Ball-bearing 5x8x2.5 (2) High quality ball bearing stainless steel. | View product >>> |
#1312 | Ballbearing 5x8x2.5 flanged Miniature ballbearing with flange, used in Centax and standard clutch. Size 5x8mm | View product >>> |
#1315 | Ball-bearing 5x10x4 (2) High quality ball bearing stainless steel. | View product >>> |
#1320 | Ballbearings 6x10 flanged (2) Miniature ballbearings used in 2-speed clutch bell. Size 6x10mm. | View product >>> |
#1326 | Ballbearing 7x14 | View product >>> |
#1342 | Ball - bearing 6 x 13 HS Purple (2) High quality ball bearing with removable seal to aid cleaning and reduce weight. | View product >>> |
#1344 | Ball-bearing 10x15x4 (2) High quality ball bearing stainless steel. | View product >>> |
#1346 | Ball - bearing 12x18x4 (2) High quality ball bearing with removable seal to aid cleaning and reduce weight. | View product >>> |
#1373 | Thrust bearing 6x14 Thrust bearing used in Impact M2, PRO and FPS-diff. Size 6x14mm. | View product >>> |
#1377 | Thrust-bearing 5x10 High Quality thrust bearing for use with the Centax-II. | View product >>> |
#1595 | Exhaust wire mount Aluminum exhaust wire mount for Serpent 950. Comes with grubscrew. | View product >>> |
#1601 | Body clips (10) Set of 10 galvanised steel body-clips. | View product >>> |
#1602 | Tank-clips small (10) Packet of 10 small body clips for mounting the fuel tank. Can also be used as body-clips for smaller rc cars. | View product >>> |
#1615 | Ball-joints 4mm (4) | View product >>> |
#1619 | Wire-guider nylon Nylon parts through which the throttle or brake-linkage slides. | View product >>> |
#1636 | Universal throttle linkage set | View product >>> |
#1637 | Universal adjustable brake-set | View product >>> |
#1639 | Collar alu 2.1+setscrew (4) Collars to use for the brake and throttlelinkages. | View product >>> |
#1647 | Steel balls 6mm (4) | View product >>> |
#1649 | Pivotball 5.8mm (20) Pack of 20 5.8mm Balls pivot balls with hex drive. | View product >>> |
#1650 | Pivotball 5.8mm (4) Pivotball 5.8mm (4) | View product >>> |
#1660 | Ball-joint set 6mm (20 pieces) Set of 20 ball joints in 6.0mm diameter. Replacement set for VETEQ pushrod ball-ends. Made of high-tensile composite material for increased wear resistance. | View product >>> |
#1667 | Body-clip medium (10) Medium sized body-clips. 10 in a bag. In use for body-posts Serpent 710. | View product >>> |
#6431 | Shockabsorber membrames (4) Universal silicon-rubber compensation membranes for shock absorbers. Fit both 9400, 9401 and new 909400 shock absorber sets. | View product >>> |
#6442 | O-ring adj.nut (10) Replacement o-ring for shock absorber sets. | View product >>> |
#6503 | Cone flywheel 7mm long (3) Universal flywheel cone, set of 3. | View product >>> |
#6582 | Centax clutchnut Replacement parts for Centax clutch system. | View product >>> |
#6583 | Centax pre-load adjusting nut Replacement parts for Centax clutch system. | View product >>> |
#6586 | Centax coilspring Coil-spring for Centax clutch system, diam. 1.7mm. This spring is mainly used for clutches on 2.1cc/.12 and 2.5cc/.15 size engines. The spring can be used in all versions of the Centax clutch. A harder Centax clutch spring is also available (#909520). | View product >>> |
#6589 | Centax spacer thrust bearing Replacement parts for Centax clutch system. Replacement partnr: 909516 | View product >>> |
#801156 | Bracket tank-mounting nylon Composite bracket for mounting rear of fuel tank to radio plate. Comes with rubber grommit. | View product >>> |
#801158 | Spacer tank-mounting 3.1 x 8 x 3 mm (2) Tank mounting post base. Packet of 2. | View product >>> |
#801171 | Battery-case + connector Composite battery case and front mount for use with the Serpent 705 and 835. | View product >>> |
#801212 | Steeringblock left FC Optional composite left steering block. FC for fluent cornering. Use smaller bearings 10x15x4 (lighter) and new shorter PTFE coated aluminium pivot balls. | View product >>> |
#801213 | Steeringblock right FC Optional composite right steering block. FC for fluent cornering. Use smaller bearings 10x15x4 (lighter) and new shorter PTFE coated aluminium pivot balls. | View product >>> |
#801215 | Wheelaxle front (2) Wheel-axle for Serpent Impulse, 705, 710, 720, 733. Hardened spring-steel, precision slots and threading. | View product >>> |
#801217 | Wheelnut M4, flanged (4) use 110402 or 110452 | View product >>> |
#801219 | Pivotball 8.5mm short (4) Set of four short aluminum 8.5mm pivot balls for use on the Serpent 705. | View product >>> |
#801222 | Steeringblock FCset +alu balls 8.5mm (4) A complete set containing the two FC composite steering blocks, 4 coated aluminium pivot balls and 4 new small purple sealed bearings. | View product >>> |
#801224 | Pin 2x9.8 mm (10) Pack of 10 steel pins. For use as drive pins in the wheel axles of the Serpent 710 and other 200mm chassis'. | View product >>> |
#801255 | Timingbelt 4mm rear The 4mm rear belt for the Serpent 200mm cars. The belt can also be used for less drag in the Serpent Impact M2 and Serpent 835 cars. | View product >>> |
#801436 | Spacer diff - adjuster Composite spacer for between the diff adjuster and the rubber o-ring on the Serpent 710 ball differential. | View product >>> |
#802110 | Manual SERPENT 710 Full Colour instruction Manual for the Serpent 710. | View product >>> |
#802111 | Reference guide SERPENT 710 Full colour reference guide for the Serpent 710. | View product >>> |
#802112 | Decal sheet SERPENT 710 Black and white Serpent 710 decal sheet on a transparent backing. Fuel proof printing. | View product >>> |
#802113 | Set-up booklet SERPENT 710 Setup booklet for Serpent 710. Contains setting explanations and aids the user in setting up and making hte most of their 710 chassis. Handy size. | View product >>> |
#802114 | Decal-sheet S710 A5 A5 sized decal sheet with 710 logo. | View product >>> |
#802120 | Chassis 4mm alu. T6 Machined 4mm chassis plate for the Serpent 710. Comes with brake alignment pins. | View product >>> |
#802125 | Chassis stiffener L carbon Left carbon chassis stiffener for Serpent 710. This part also acts as the mounting point for the side belt tensioner. | View product >>> |
#802126 | Chassis stiffener R carbon Right carbon chassis stiffener for the Serpent 710. | View product >>> |
#802128 | Battery-case mount Composite battery case front mount point. | View product >>> |
#802130 | Radiotray carbon S - 710 Carbon radio plate for the Serpent 710. | View product >>> |
#802135 | Bracket radioplate-support Composite radioplate support and chassis stiffener mount for the Serpent 710. | View product >>> |
#802138 | Roll-over bar, S - 710 Composite roll over bar for the Serpent 710. | View product >>> |
#802140 | Servo saver set Complete servo saver set for the Serpent 710. | View product >>> |
#802141 | Servo saver axle Aluminium centre post for the Serpent 710 servo saver. Comes with C-clip. | View product >>> |
#802142 | Servo saver spring Tension spring for the Serpent 710 servo saver. | View product >>> |
#802143 | Servo saver set nylon Composite set containing servo lever mount and steering linkage mount. The set also contains the servo saver mounting inserts. | View product >>> |
#802144 | Servo mount-bracket Composite steering servo mounting bracket for the Serpent 710. | View product >>> |
#802150 | Receiver bracket Composite receiver mounting bracket for the Serpent 710. Incorporates antenna mount. | View product >>> |
#802151 | Receiver cover Composite protective cover for receiver mount on the Serpent 710. | View product >>> |
#802154 | Bracket middle shaft Composite middle shaft bracket for the Serpent 710. | View product >>> |
#802156 | Timingbelt 246X4mm front Kevlar reinforced drive belt for use on the front of the Serpent 710. | View product >>> |
#802158 | Timingbelt 339X4mm long (side) Kevlar reinforced drive belt for the side of the Serpent 710. | View product >>> |
#802161 | Middle shaft steel Central pulley shaft for the Serpent 710/720. Made from Steel. | View product >>> |
#802164 | Pully adaptor alu (2) Set of 2 aluminum pulley adaptors complete with grubscrews. Suitable for Serpent 710. | View product >>> |
#802169 | Pulley / shim 19T mid-center Composite 19T pulley / shim for the inside of the central shaft of the Serpent 710. | View product >>> |
#802172 | Pulley / shim 22T mid-side Composite 22T pulley / shim for the outside of the central shaft of the Serpent 710. | View product >>> |
#802201 | Shocktower carbon front Carbon front shock tower with multiple mounting positions. For use on the Serpent 710. | View product >>> |
#802203 | Bumper foam Foam bumper for use on the Serpent 710. | View product >>> |
#802205 | Bumper-plate TC Lower composite bumper plate for Serpent 710. Also mounting point for front body posts. | View product >>> |
#802206 | Bodymount plate TC Composite bodymount plate for the Serpent 710. Part contains the mounting points for the cars downstops. | View product >>> |
#802211 | Bodymount adjustable front (3) Full set of adjustable front body posts including the the third centre mount. Comes complete with mounting screws and body clips. | View product >>> |
#802213 | Bearing block front lw left Composite left lower front bearing block for the Serpent 710. | View product >>> |
#802214 | Bearing block front lw right Composite right lower front bearing block for the Serpent 710. | View product >>> |
#802215 | Bearing block front up left Composite left upper front bearing block for the Serpent 710. | View product >>> |
#802216 | Bearing block front up right Composite right upper front bearing block for the Serpent 710. | View product >>> |
#802217 | Suspension bracket front left Composite front left suspension bracket for Serpent 710. | View product >>> |
#802218 | Suspension bracket front right Composite front right suspension bracket for Serpent 710. | View product >>> |
#802219 | Wishbone front upper left / right Composite front upper wishbone. Part is suitable for both left and right. | View product >>> |
#802221 | Wishbone front lower right Composite front lower left wishbone for Serpent 710. | View product >>> |
#802222 | Wishbone front lower right Composite front lower right wishbone for Serpent 710. | View product >>> |
#802223 | Spacer alu front 1mm (6) Set of 6 aluminum 1mm thick front roll center spacers for Serpent 710. | View product >>> |
#802224 | Spacer alu front 2mm (6) Set of 6 aluminum 2mm thick front roll center spacers for Serpent 710. | View product >>> |
#802225 | Pivot pin front upper (2) Set of 2 steel front upper wishbone pivot pins for Serpent 710. | View product >>> |
#802226 | Pivot pin front lower (2) Set of 2 steel front lower wishbone pivot pins for Serpent 710. | View product >>> |
#802230 | Suspension set FR Nylon S710 A full set of spare front nylon suspension parts for the Serpent 710. | View product >>> |
#802240 | Anti-roll bar levers + ecc. Composite front anti roll bar levers for Serpent 710. Comes supplied with eccenter for fine tuning anti roll bar alignment. | View product >>> |
#802242 | Anti-roll bar rod front male Front male anti roll bar lever with hex drive for easy adjustment. Suitable for Serpent 710. | View product >>> |
#802243 | Anti-roll bar rod front female Front female anti roll bar lever with hex drive for easy adjustment. Suitable for Serpent 710. | View product >>> |
#802245 | Axle front with Oneways Front aluminum axle with one way bearings for Serpent 710. Set up with 2 drilled holes to mount the optional lock-set # 802252, which turns the shaft into a solid axle. | View product >>> |
#802246 | Pully 35T/flange Composite 35T pulley & flange for front axle of Serpent 710. | View product >>> |
#802248 | Driveshaft adaptor (2) Set of 2 hardened steel driveshaft adaptors for use with the Serpent 710 one way axle. | View product >>> |
#802260 | Trackrod M3x47mm (2) Trackrod M3x47mm (2) | View product >>> |
#802301 | Shocktower carbon rear Carbon shock tower rear with multiple mounting points for the Serpent 710. | View product >>> |
#802303 | Brake bracket rear carbon Carbon rear brake bracket for the Serpent 710. | View product >>> |
#802304 | Rearplate Composite rear backplate for the Serpent 710. | View product >>> |
#802305 | Bearing block rear lw left Composite rear lower left bearing block for the Serpent 710. | View product >>> |
#802306 | Bearing block rear lw right Composite rear lower right bearing block for the Serpent 710. | View product >>> |
#802307 | Bearing block rear up left Composite rear upper left bearing block for the Serpent 710. | View product >>> |
#802308 | Bearing block rear up right Composite rear upper right bearing block for the Serpent 710. | View product >>> |
#802309 | Bearing eccenter (2) Set of 2 composite bearing eccenter suitable for the front or rear main axles of the Serpent 710. | View product >>> |
#802310 | Suspension bracket rear lw Composite rear lower suspension bracket for the Serpent 710. | View product >>> |
#802311 | Suspension bracket rear up Composite rear upper Suspension bracket with anti-roll bar channel for Serpent 710. | View product >>> |
#802312 | Bearing block 2-speed L Composite rear left 2 speed bearing block for Serpent 710. | View product >>> |
#802314 | Bearingblock 2-speed R Composite rear right 2 speed bearing block for Serpent 710. | View product >>> |
#802316 | Wishbone rear upper left Composite rear upper left wishbone for the Serpent 710. | View product >>> |
#802317 | Wishbone rear upper right Composite rear upper right wishbone for the Serpent 710. | View product >>> |
#802318 | Wishbone rear lower left Composite rear lower left wishbone for the Serpent 710. | View product >>> |
#802319 | Wishbone rear lower right Composite rear lower right wishbone for the Serpent 710. | View product >>> |
#802320 | Trackrod rear lw nylon (2) Set of 2 composite DRS trackrods for the Serpent 710. | View product >>> |
#802322 | Spacer alu conical (4) Set of 4 aluminum conical spacers for use with the Serpent 710 DRS System. | View product >>> |
#802323 | Spacer alu straight (2) Set of 2 aluminum straight spacers for use with the Serpent 710 DRS System. | View product >>> |
#802324 | Pivot inserts Up & Lw (4+4) Set of 4 upper and 4 lower rear pivot pin inserts for multiple roll center options on the Serpent 710. | View product >>> |
#802325 | Pivot inserts Up & Lw mid-pos (8) Set of 4 upper and 4 lower rear pivot pin inserts with a middle position hole for further roll center options on the Serpent 710. | View product >>> |
#802327 | Suspension set RR Nylon S710 A full set of spare rear nylon suspension parts for the Serpent 710. | View product >>> |
#802328 | Pivot pin rear upper (2) Set of 2 steel rear upper pivot pins with grinded flat spots for the Serpent 710. | View product >>> |
#802329 | Pivot pin rear lower (2) Set of 2 steel rear lower pivot pins with grinded flat spots for the Serpent 710. | View product >>> |
#802330 | Up-right (1) Composite rear upright for Serpent 710. Suitable for both left and right. Pre-threaded. | View product >>> |
#802332 | Driveshaft (2) Set of 2 hardened steel driveshafts that are suitable for both the front and rear of the Serpent 710. | View product >>> |
#802336 | Anti-roll bar rear 2 mm Rear 2mm anti roll bar for the Serpent 710. | View product >>> |
#802339 | Anti-roll bar balls rear (2) Set of 2 coated rear anti-roll bar balls with mounting grubscrews for Serpent 710. | View product >>> |
#802340 | Pulley-brake adaptor alu Aluminum pulley brake adaptor with c-clip and mounting grubscrew for use with the Serpent 710. | View product >>> |
#802342 | Pulley / shim 22T 2sp - side Composite 22T pulley for use on the side of the 2 speed shaft of the Serpent 710. | View product >>> |
#802344 | Pulley 24T 2 sp - center Composite 24T central pulley / shim on the Serpent 710 2 speed shaft. | View product >>> |
#802371 | Diff. axle front female L Front left diff-axle Serpent 710, special quality hardened steel. | View product >>> |
#802373 | Diff. axle front male R Replacement front Diff axle, male, for the optional ball differential of the Serpent 710. Made from high quality ultra strong steel. | View product >>> |
#802375 | Diff pulley front 35T Composite 35T front pulley for use with the optional front differential. | View product >>> |
#802380 | Ball. Differential rear Complete ball differential set including all parts required to have a fully functional rear ball differential for the Serpent 710. For the manual, check the I-manual section. | View product >>> |
#802381 | Diff. axle rear L Hardened steel left diff axle for the Serpent 710 rear ball differential. | View product >>> |
#802383 | Diff. axle rear R Hardened steel right diff axle for the Serpent 710 rear ball differential. | View product >>> |
#802385 | Diff pully rear 45T Composite 45T rear ball diff pulley for the Serpent 710. | View product >>> |
#802388 | Diff Adjuster tool Composite tool to aid checking of main diff pulley slippage. Suitable for both the Serpent 710 and 835. | View product >>> |
#802395 | Brake - cam PTFE coated aluminum brake cam for use on the Serpent 710. Comes with c-clip. | View product >>> |
#802400 | 2 - speed gearbox LC (no shaft incl) Complete 2 speed LC gearbox set for use on the Serpent 710. Includes everything required with the exception of the 2 speed shaft. Manual can be found in the menu: I-manual under S710. | View product >>> |
#802401 | 2 - speed axle 4 WD 710 2 speed gearbox shaft for the Serpent 710. | View product >>> |
#802403 | 2-speed spring (2) Pair of gearbox tension springs for use in the Serpent gearbox. | View product >>> |
#802404 | 2-speed gearbox shoes set LC Complete 2 speed shoes set. Consists of shoes, roller pins, grubscrews, springs and adjustment screws. | View product >>> |
#802455 | 2 - speed gear 55T (2ND) LC Composite 55T fine pitch 2 speed 2nd gear for use on the LC gearbox. | View product >>> |
#802456 | 2 - speed gear 56T (2ND) LC Composite 56T fine pitch 2 speed 2nd gear for use on the LC gearbox. | View product >>> |
#802457 | 2 - speed gear 57T (2ND) LC Composite 57T fine pitch 2 speed 2nd gear for use on the LC gearbox. | View product >>> |
#802459 | 2 - speed gear 59T (1ST) LC Composite 59T fine pitch 2 speed 1st gear for use on the LC gearbox. | View product >>> |
#802460 | 2 - speed gear 60T (1ST) LC Composite 60T fine pitch 2 speed 1st gear for use on the LC gearbox. | View product >>> |
#802461 | 2 - speed gear 61T (1ST) LC Composite 61T fine pitch 2 speed 1st gear for use on the LC gearbox. | View product >>> |
#802500 | Centax 3 clutch-set (excl. Flywheel) Complete Centax 3 clutch system including everything needed to build a complete clutch system with the exception of the flywheel. | View product >>> |
#802501 | Centax - 3 clutch-housing Hardened steel clutch housing for the Centax-3. | View product >>> |
#802502 | Centax-III clutch housing open Ultra lightweight clutch housing for use on the Centax-III clutch system. Serpent 710. | View product >>> |
#802504 | Centax - 3 support washer Aluminum Centax 3 support washer. | View product >>> |
#802505 | Centax - 3 spring cup Aluminum spring cup for the Centax 3. | View product >>> |
#802506 | Centax - 3 flywheel 33mm Flywheel for the Centax 3 featuring coating to enable the centrifugal shoes to work freely and knurled around the diameter for best grip on the starter box. | View product >>> |
#802507 | Centax - 3 centrifugal shoes (3) Set of 3 centrifugal shoes for the Centax 3. | View product >>> |
#802508 | Centax - 3 clutch shoe XP XP clutch shoe for use with the Centax 3. | View product >>> |
#802514 | Centax-3 clutch housing holder Lightweight aluminium Centax 3 clutch bell gripper. Comes with steel fixing pin. | View product >>> |
#802515 | Pinion gear tool Set of 2 plastic Centax 3 pinion gear tools to help fasten the pinon gears to the bell housing. Fits all gears (16-18T, 20-23T). | View product >>> |
#802517 | Centax - 3 gear - pinion alu. 17T Aluminum 17T Centax 3 1st gear pinion. | View product >>> |
#802518 | Centax - 3 gear - pinion alu. 18T Aluminum 18T Centax 3 1st gear pinion. | View product >>> |
#802520 | Centax-3 Gear Alu 20T Coated aluminium 20T pinion gear for use on the Centax-3. | View product >>> |
#802521 | Centax - 3 gear - pinion alu. 21T Aluminum 21T Centax 3 2nd gear pinion. | View product >>> |
#802522 | Centax - 3 gear - pinion alu. 22T Aluminum 22T Centax 3 2nd gear pinion. | View product >>> |
#802523 | Centax - 3 gear - pinion alu. 23T Aluminum 23T Centax 3 2nd gear pinion. | View product >>> |
#802550 | Engine mount M12 (2) Set of 2 purple anodized engine mounts for the Serpent 710. | View product >>> |
#802551 | Engine mount screw M4 x 10 flanged (4) Set of 4 engine mount screws with flange. Replacement part nr: 110169 | View product >>> |
#802555 | Positioning support S710 Positioning supports to mount the Serpent 710 on the Powerstart starterbox. | View product >>> |
#803179 | Tank 75cc / AFL-lid / O-ring seal Tank set including 75ccm fuel tank for the 705, 710, 835 and 720, o-ring for the included AFL-lid, fuel tubing, 2 pressure nipples and grubscrew. Tank is fitted with bronze filter attached to brass pipe. | View product >>> |
#808214 | Spacer-set caster (3) Set of 2 nylon frames with 1-2-4mm caster shims. The shims can be placed in front or behind the upper suspension arm, therewith changing the caster angle of the front suspension. | View product >>> |
#808340 | Ball-cups set nylon (12) Universal ball cups made of special low-friction composite material. Used on all models of Impulse, Impact 2 / M2 and Vector. | View product >>> |
#808344 | Alu.adjusting nuts M10 (4) Universal alu. adjusting plugs with M10. Used on all models Impulse, Impact and Vector on steering blocks and up-rights. | View product >>> |
#808347 | Pivot-ball 8.5mm alu coated (8) Hard anodised + PTFE coated aluminium pivot balls. Ultra lightweight and long wearing. Available in packs of eight | View product >>> |
#901255 | Belt tensioner Alu. belt tensioner S950, S835, S705, VETEQ. | View product >>> |
#902138 | Trackrod M3x23 (2) Trackrod M3x23 (2) | View product >>> |
#902411 | Drive-flange alu with owb Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
#902412 | Adaptor 2-speed LC Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing. | View product >>> |
#902413 | Carrier 2nd Gear LC Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox. | View product >>> |
#902416 | 2-speed shoe-set LC II A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only. | View product >>> |
#902420 | Roller pin steel 5X5 (2) A pair of steel roller pins for use in the LC gearbox. Replaced by 110202 Pin 5x5 (10) | View product >>> |
#902421 | Needle 3x13.8 (4) Set of 4 Roll pins for use with the new LC Gearbox 2 speed adapter. Replaced by 110203 Pin 3x14 (10) | View product >>> |
#903186 | C + G Clip + washer RCC shocks (12) Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks. | View product >>> |
#909402 | Pivot point top shockabsorber 4-step (2) Handy set of 2 pivot point tops for your Serpent 4 step shockabsorbers | View product >>> |
#909403 | Ball-joint short lower shock-absorber (4) Handy set of 4 ball-joints for your short lower shock-absorbers. Use 903231 instead. | View product >>> |
#909404 | Spring-support washers (4) Set of four spring support washers. | View product >>> |
#909405 | Shock adjusting nut alu. + O-rings (4) Set of 4 alu. spring-tension adjusting nuts and 4 O-rings to be inserted into the alu. adjusting nuts. O-ring prevents adjusting nut from coming loose. | View product >>> |
#909406 | Shock cap-nut alu. (2) Alu. nut to close up the top pivot point of the 4-step adjustable shock absorber. Set of 2. | View product >>> |
#909407 | O-ring soft-purple (4) Set of 4 O-rings and shims, used to seal and guide the shock rod in the bottom part of the shock cilinder. | View product >>> |
#909440 | Shock-absorber-set key FR+RR Full set (4) of Serpents revolutionary 4-step shock absorbers. Featuring new keyed shock pistons and shafts this set comes with a set of yellow springs. Comes complete with assembly instructions. | View product >>> |
#909441 | Shock-parts frame key FR+RR (2) Complete set (4) of composite parts for Serpents 4-step adjustable shock absorbers. | View product >>> |
#909442 | Piston-rods FR key (2) A set of 2 keyed shock shafts complete with the c-clips required to mount the composite shock pistons. | View product >>> |
#909444 | Piston-rods RR key (2) A set of 2 keyed shock shafts for the rear shocks, complete with the c-clips required to mount the composite shock pistons. | View product >>> |
#909445 | Shock-pistons frame adj+fixed key (2) Complete set of adjustable and non adjustable pistons for use with Serpent shock absorbers. | View product >>> |
#909514 | Centax II bearing spacer 5x7 Aluminium spacer for use in the Centax-II clutch system. | View product >>> |
#909519 | Centax II shims 5 x 10 x 0.3 (2) + 0.5 (1) Set of 3 Centax-II shims in two sizes 0.3 (2) and 0.5 (1). | View product >>> |
#9611 | Steel brake disks (2) MK-2 Brake discs for all 1/8 and 1/10 scale Serpent cars. Set of 2. | View product >>> |
#9638 | Spacer aluminium for 2-speed shaft To use on 2-speed shaft on Impulse, Impact 2WD. | View product >>> |