> Serpent 720 -09 1/10th scale 200mm (#803009)
- Brand:
- Serpent
Product Type:- Gas Cars > 1/10 200mm
Serpent is pleased to announce the release of the ‘09 spec of the Championship winning Serpent 720 chassis. Maintaining the cars race winning geometry and already high specification, the 2009 version will now be supplied with a number of great option parts as standard. Main new features: - LCG chassisplate made of aerospace quality 7075T6, lowered, and has pockets for carbon stiffners / brass weights. ( this idea has been followed by many already) - Harder nylon parts - Spring steel cvd’s front - New material fueltank, more temperature stabile Serpent 720-09 TQ and winner of the 2009 Winternats, USA
Related products
View: Text | Images
> Optional parts
| #1378 | Balls ceramic coated (12) Ultra hard coated 3.9mm diameter ceramic balls for use in the ball differential of the Serpent 710. Comes in a pack of 12. | View product >>> |
| #1388 | Thrust bearing 5x10 Ceramic 5x10 thrust bearing with ceramic balls. Ligther and more durable with perfect run-ways. A direct replacement for the standard thurst-bearing, to be used in Centax-3 clutch system. | View product >>> |
| #1434 | Pressure nipple angled Right angled back pressure nipple. Suitable for all Serpent fuel tanks. | View product >>> |
| #1530 | Fuel filter special Aluminium in line fuel filter for use on any gas powered rc car. | View product >>> |
| #160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
| #160330 | Spring set L27 (5) Set of 5 pairs of 27mm long shock absorber springs. The set includes red, purple, green, pink and blue springs. | View product >>> |
| #1886 | Decal sheet 1/10 black-white (2) High quality decal-sheet size 30x20cm. Serpent logo's. To apply to bodies. Replacement part nr: www.serpent.com/190401 | View product >>> |
| #801159 | Spacer Fuel-tank Capacity (5) Set of 5 spacers and two screws to allow you to adjust the capacity of your fuel tank. | View product >>> |
| #801173 | Battery-set 5-cell 730mA S-705-835 Complete pre made battery pack - Comes complete with plug - The pack contains 5 730Mah AAA batteries - Suitable for the Serpent 705 and 835 | View product >>> |
| #801214 | Wheelaxle Pro (2) Special light-weight wheel axle with double drive slots. Made of high-tensile and heat treated steel. Interchangeable with standard axles 801215. Fits Serpent 710 front and rear, Serpent 705 only front. | View product >>> |
| #801256 | Timingbelt 201X5mm rear Pro Pro timing belt for the Serpent 710. Soft belts are optimised for smooth running. Rear belt 201x5mm. Also fits Serpent Impulse and Serpent 705 cars. | View product >>> |
| #801435 | Diff - adjuster external Diff adjuster external for S705 and older Impact differentials | View product >>> |
| #801436 | Spacer diff - adjuster Composite spacer for between the diff adjuster and the rubber o-ring on the Serpent 710 ball differential. | View product >>> |
| #802155 | Bracket middle shaft alu Aluminium middle bracket for Serpent 710. Comes with fastening material. | View product >>> |
| #802162 | Middle Shaft S710 alu coated Coated lightweight aluminium middle shaft for use on the Serpent 710/720. | View product >>> |
| #802163 | Middle shaft S710-720 steel light Spring steel, lightweight middle shaft for the 710 and 720. | View product >>> |
| #802165 | Pully adaptor alu. light (2) Set of 2 lightweight 710 pulley adaptors. Made from Aluminium they are supplied with the required grubscrews. | View product >>> |
| #802170 | Pulley / shim 19T mid-center alu Aluminium 19T mid center pulley for use on the Serpent 710. Comes supplied with grubscrew. | View product >>> |
| #802171 | Pulley/shim 21T mid side alu Aluminium 21T middle-side pulley for the Serpent 710. Comes supplied with grubscrew. | View product >>> |
| #802173 | Pulley / shim 22T mid-side alu Aluminium 22T mid-side pulley for use on the Serpent 710. Comes supplied with grubscrew. | View product >>> |
| #802209 | Bumper lower LM-type Composite lower front bumper for 1/10th scale chassis' for use with a GTP or Lola body shell. | View product >>> |
| #802212 | Body posts adjustable front alu (2+1) Set of 3 aluminium body posts for use on front of Serpent 1/10 cars. Comes with required fastener. | View product >>> |
| #802241 | Anti-roll bar levers Alu Aluminum anti roll bar levers. Precision machined from high quality aluminium, with a nice orange anodised finish. Suitable for the Serpent 710. | View product >>> |
| #802245 | Axle front with Oneways Front aluminum axle with one way bearings for Serpent 710. Set up with 2 drilled holes to mount the optional lock-set # 802252, which turns the shaft into a solid axle. | View product >>> |
| #802246 | Pully 35T/flange Composite 35T pulley & flange for front axle of Serpent 710. | View product >>> |
| #802248 | Driveshaft adaptor (2) Set of 2 hardened steel driveshaft adaptors for use with the Serpent 710 one way axle. | View product >>> |
| #802252 | Front shaft lock-set Set with pins and a bushings to lock the front shaft with one-way bearings very quick and easy into a solid front shaft. | View product >>> |
| #802261 | Trackrod M3x47mm Titanium (2) Trackrod M3x47mm (2) Titanium | View product >>> |
| #802345 | Pulley 24T 2sp - center alu Aluminium 24T center Pulley for use on the 2 speed shaft of the Serpent 710 & 720. Comes supplied with mounting grub screw. | View product >>> |
| #802350 | CV-axles set Set of 2 high performance CVD shafts for use on Serpents range of 1/10th 200mm. | View product >>> |
| #802362 | Body posts adjustable rear alu (2) Set of 2 aluminium body posts for Serpent 1/10. Comes with fasteners. | View product >>> |
| #802370 | Ball. Differential front Complete front ball differential set for the Serpent 710. Contains all the parts necessary to complete the assembly including an instruction sheet. | View product >>> |
| #802380 | Ball. Differential rear Complete ball differential set including all parts required to have a fully functional rear ball differential for the Serpent 710. For the manual, check the I-manual section. | View product >>> |
| #802387 | Diff clamp-ring 2 parts S710 New diff clamp ring set, suitable for the S710 ball differentials (front and rear). Design enables wider range to set the tension on the diff. | View product >>> |
| #802393 | Diff Adjuster alu. Pro-set Complete pro diff alu. adjuster set. Fits directly onto the Serpent 710 differential and comes complete with aluminum diff adjuster, shoe and adjuster screw. | View product >>> |
| #802394 | Diff-set shoe Pro Spare shoe for use with the Pro diff-set. | View product >>> |
| #802502 | Centax-III clutch housing open Ultra lightweight clutch housing for use on the Centax-III clutch system. Serpent 710. | View product >>> |
| #802525 | Centax-3 gear 16/22T Steel Centax-3 pinion gear featuring 16/22 teeth. | View product >>> |
| #802526 | Centax-3 gear 16/23T Steel Centax-3 pinion gear featuring 16/23 teeth. | View product >>> |
| #802551 | Engine mount screw M4 x 10 flanged (4) Set of 4 engine mount screws with flange. Replacement part nr: 110169 | View product >>> |
| #802608 | Spares set geardiff (15) Spares set for optional rear gear diff. Contains 4 fastening screws, 1 large O-ring, 2 small o-rings, 2 roll pins and 6 shims. | View product >>> |
| #803169 | Adjustable rear anti-roll bar soft Aluminium soft rear anti-roll bar. Suitable for Serpent 1/8th scale chassis and 720. Comes complete with 2 grubscrews. | View product >>> |
| #803170 | Eccenter bearing alu (2+2) Complete set of 4 aluminum bearing eccenters for the Serpent 720. | View product >>> |
| #803173 | Pulley shim 21T alu coated Aluminium 21T middle-side pulley for the Serpent 720. Comes supplied with grub screw. | View product >>> |
| #803178 | 2-speed shaft 720 SPP Spring steel 2-speed shaft for the Serpent 720. | View product >>> |
| #803180 | Rear body brace SPP 1mm carbon support brace for the Serpent 720. Features the SPP logo cutout of the plate. | View product >>> |
| #803181 | Support plate GTP mount carbon Carbon body support plate for the optional GTP rear bodymount for the Serpent 720. | View product >>> |
| #803182 | Suspension support GTP carbon Carbon suspension support plate for the optional GTP rear bodymount for the Serpent 720. | View product >>> |
| #803183 | Body Support GTP nylon+arms Nylon body support with GTP arms for the optional GTP rear bodymount for the Serpent 720. | View product >>> |
| #803187 | Brake Pulley adaptor one-way set 720 Brake Pulley adaptor one-way set for the Serpent 720. Includes new 2-speed shaft, one-way adaptor, pulley adaptor with one-way bearing, new pulley and spacers and fasteners. | View product >>> |
| #803191 | Chassis Plate 720 SPP Carbon Optional chassis plate with carbon plate insert for the Serpent 720. Ready: Jan 2007 | View product >>> |
| #803202 | Overdrive conversion set 720 18T A set consisting of 2 orange anodised eccenters and 18T pulley to create more overdrive to the front wheels. | View product >>> |
| #803204 | Anti-Roll bar blade FR soft set Pair of soft anti roll bar blades. | View product >>> |
| #803205 | Centax-3 clutch shoe red Red clutch shoe for Centax-III. | View product >>> |
| #803206 | Battery holder brass 720 Brass battery holder for the 720, 710, 705 & 835. | View product >>> |
| #803208 | Centax-3 flywheel 31mm 31mm diameter Centax-3 flywheel. | View product >>> |
| #803213 | Ventilated brake disc 1/10th Ventilated single piece brake disc for use on the Serpent 720 and older 1/10th scale chassis'. | View product >>> |
| #803220 | 2-speed gearbox set wc (no shaft) Complete 2 speed WC gearbox set for use on the Serpent 710, 720 and 733. Includes everything required with the exception of the 2 speed shaft. Manual can be found in the menu: I-manual under S733. | View product >>> |
| #804171 | Geardiff uni 733 Complete set to assemble the universal 733 geardiff. Fits front and/or rear. Supersmall, very light, strong case. 22 gram incl main gear. | View product >>> |
| #804173 | Gear-diff revision-set Gear-diff revision-set. | View product >>> |
| #804174 | Gear-diff housing Precision moulded nylon gear-diff case. | View product >>> |
| #804188 | Driveshaft adaptors geardiff Pro (2) Spring steel, lightened drive shaft adaptors for gear-diff 733. 2 pieces. | View product >>> |
| #804194 | Wheel hexagon +1mm (4) Wheel hexagon +1mm (4) to create more offset. Replacement part nr: 500689 | View product >>> |
| #804195 | Wheel hexagon -1mm (4) Wheel hexagon -1mm (4) to create less offset. | View product >>> |
| #804200 | Diffcase O-ring EP (10) Diffcase O-ring 22,5x1 (10) | View product >>> |
| #804205 | Cvd Wheelaxle pro (2) Cvd Wheelaxle pro (2) Spring steel, lightweight, durable, precision machined and polished. | View product >>> |
| #903209 | Teflon brake pads (4) Set of 4 Teflon brake pads for use with all modern Serpent chassis'. | View product >>> |
| #903226 | Shock rod RCC short Ti-Ni (2) Pair of short Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903227 | Shock rod RCC long Ti-Ni (2) Pair of long Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903232 | Spring Support alu light (4) Set of 4 lightweight aluminium spring supports for Serpent shock absorbers. | View product >>> |
| #903240 | Spring Cup nylon ISL (4) Set of 4 spring cups for Serpent shock absorbers that raises the spring height on the shaft by 2mm. | View product >>> |
| #903303 | Drive-flange alu with owb Pro Orange anodised aluminum drive flange for the LC gearbox. Used to mount the 1st gear, comes complete with high duty Japan-made one way bearing Pro. Use special formula #1680 One-Way Lube to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
| #903334 | Shock-set RCC-X short (2) Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
| #9607 | Race brakepad-set L + R (type A) Complete set of steel brake-plates with a special type of pre-mounted brake-liner. Fits all Serpent cars. After rigorous testing we found this brake liner compound maintains a very high coefficient of friction under all sorts of conditions. It needs limited time to heat up and then stays very stable. You never need to glue brake pads again!. The liners are mounted onto the plates in an industrial oven and then ground to the correct thickness. | View product >>> |
News