Serpent is pleased to announce the release of the ‘09 spec of the Championship winning Serpent 720 chassis. Maintaining the cars race winning geometry and already high specification, the 2009 version will now be supplied with a number of great option parts as standard. Main new features: - LCG chassisplate made of aerospace quality 7075T6, lowered, and has pockets for carbon stiffners / brass weights. ( this idea has been followed by many already) - Harder nylon parts - Spring steel cvd’s front - New material fueltank, more temperature stabile Serpent 720-09 TQ and winner of the 2009 Winternats, USA
#1070 | Grommet rubber soft (4) High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes. | View product >>> |
#1093 | Centax 5x8 shim-set 0.1 (2) 0.3 (1) Special shims to adjust end-play on the Centax clutch housing. Shims are used on the outside of the thrust-bearing bushing. Set includes 2 shims of 0.1mm and 1 shim of 0.3mm. | View product >>> |
#110300 | E-clip 2.3 (10) E-clip 2.3 (10) | View product >>> |
#110301 | E-clip 3.2 (10) E-clip 3.2 (10) | View product >>> |
#110302 | E-clip 4.0 (10) E-clip 4.0 (10) | View product >>> |
#110303 | E-clip 5.0 (10) E-clip 5.0 (10) | View product >>> |
#110304 | E-clip 7.0 (10) E-clip 7.0 (10) | View product >>> |
#1311 | Ball-bearing 5x8x2.5 (2) High quality ball bearing stainless steel. | View product >>> |
#1312 | Ballbearing 5x8x2.5 flanged Miniature ballbearing with flange, used in Centax and standard clutch. Size 5x8mm | View product >>> |
#1315 | Ball-bearing 5x10x4 (2) High quality ball bearing stainless steel. | View product >>> |
#1320 | Ballbearings 6x10 flanged (2) Miniature ballbearings used in 2-speed clutch bell. Size 6x10mm. | View product >>> |
#1342 | Ball - bearing 6 x 13 HS Purple (2) High quality ball bearing with removable seal to aid cleaning and reduce weight. | View product >>> |
#1344 | Ball-bearing 10x15x4 (2) High quality ball bearing stainless steel. | View product >>> |
#1346 | Ball - bearing 12x18x4 (2) High quality ball bearing with removable seal to aid cleaning and reduce weight. | View product >>> |
#1595 | Exhaust wire mount Aluminum exhaust wire mount for Serpent 950. Comes with grubscrew. | View product >>> |
#1601 | Body clips (10) Set of 10 galvanised steel body-clips. | View product >>> |
#1602 | Tank-clips small (10) Packet of 10 small body clips for mounting the fuel tank. Can also be used as body-clips for smaller rc cars. | View product >>> |
#1615 | Ball-joints 4mm (4) | View product >>> |
#1619 | Wire-guider nylon Nylon parts through which the throttle or brake-linkage slides. | View product >>> |
#1636 | Universal throttle linkage set | View product >>> |
#1637 | Universal adjustable brake-set | View product >>> |
#1639 | Collar alu 2.1+setscrew (4) Collars to use for the brake and throttlelinkages. | View product >>> |
#1647 | Steel balls 6mm (4) | View product >>> |
#1649 | Pivotball 5.8mm (20) Pack of 20 5.8mm Balls pivot balls with hex drive. | View product >>> |
#1650 | Pivotball 5.8mm (4) Pivotball 5.8mm (4) | View product >>> |
#1660 | Ball-joint set 6mm (20 pieces) Set of 20 ball joints in 6.0mm diameter. Replacement set for VETEQ pushrod ball-ends. Made of high-tensile composite material for increased wear resistance. | View product >>> |
#1667 | Body-clip medium (10) Medium sized body-clips. 10 in a bag. In use for body-posts Serpent 710. | View product >>> |
#6503 | Cone flywheel 7mm long (3) Universal flywheel cone, set of 3. | View product >>> |
#6582 | Centax clutchnut Replacement parts for Centax clutch system. | View product >>> |
#6583 | Centax pre-load adjusting nut Replacement parts for Centax clutch system. | View product >>> |
#6586 | Centax coilspring Coil-spring for Centax clutch system, diam. 1.7mm. This spring is mainly used for clutches on 2.1cc/.12 and 2.5cc/.15 size engines. The spring can be used in all versions of the Centax clutch. A harder Centax clutch spring is also available (#909520). | View product >>> |
#6589 | Centax spacer thrust bearing Replacement parts for Centax clutch system. Replacement partnr: 909516 | View product >>> |
#801156 | Bracket tank-mounting nylon Composite bracket for mounting rear of fuel tank to radio plate. Comes with rubber grommit. | View product >>> |
#801171 | Battery-case + connector Composite battery case and front mount for use with the Serpent 705 and 835. | View product >>> |
#801215 | Wheelaxle front (2) Wheel-axle for Serpent Impulse, 705, 710, 720, 733. Hardened spring-steel, precision slots and threading. | View product >>> |
#801217 | Wheelnut M4, flanged (4) use 110402 or 110452 | View product >>> |
#801218 | Wheel hexagon alu 0mm (2) Alu. hex wheel adapters, anodized. Precision machined. Offset 0. | View product >>> |
#801219 | Pivotball 8.5mm short (4) Set of four short aluminum 8.5mm pivot balls for use on the Serpent 705. | View product >>> |
#801224 | Pin 2x9.8 mm (10) Pack of 10 steel pins. For use as drive pins in the wheel axles of the Serpent 710 and other 200mm chassis'. | View product >>> |
#801255 | Timingbelt 4mm rear The 4mm rear belt for the Serpent 200mm cars. The belt can also be used for less drag in the Serpent Impact M2 and Serpent 835 cars. | View product >>> |
#801345 | Brake disk steel ventilated Ventilated, steel brake disk for S705, SERPENT 710, S835, Impact, S705, Impulse cars. | View product >>> |
#802138 | Roll-over bar, S - 710 Composite roll over bar for the Serpent 710. | View product >>> |
#802141 | Servo saver axle Aluminium centre post for the Serpent 710 servo saver. Comes with C-clip. | View product >>> |
#802142 | Servo saver spring Tension spring for the Serpent 710 servo saver. | View product >>> |
#802144 | Servo mount-bracket Composite steering servo mounting bracket for the Serpent 710. | View product >>> |
#802150 | Receiver bracket Composite receiver mounting bracket for the Serpent 710. Incorporates antenna mount. | View product >>> |
#802151 | Receiver cover Composite protective cover for receiver mount on the Serpent 710. | View product >>> |
#802154 | Bracket middle shaft Composite middle shaft bracket for the Serpent 710. | View product >>> |
#802156 | Timingbelt 246X4mm front Kevlar reinforced drive belt for use on the front of the Serpent 710. | View product >>> |
#802158 | Timingbelt 339X4mm long (side) Kevlar reinforced drive belt for the side of the Serpent 710. | View product >>> |
#802161 | Middle shaft steel Central pulley shaft for the Serpent 710/720. Made from Steel. | View product >>> |
#802164 | Pully adaptor alu (2) Set of 2 aluminum pulley adaptors complete with grubscrews. Suitable for Serpent 710. | View product >>> |
#802169 | Pulley / shim 19T mid-center Composite 19T pulley / shim for the inside of the central shaft of the Serpent 710. | View product >>> |
#802172 | Pulley / shim 22T mid-side Composite 22T pulley / shim for the outside of the central shaft of the Serpent 710. | View product >>> |
#802211 | Bodymount adjustable front (3) Full set of adjustable front body posts including the the third centre mount. Comes complete with mounting screws and body clips. | View product >>> |
#802219 | Wishbone front upper left / right Composite front upper wishbone. Part is suitable for both left and right. | View product >>> |
#802226 | Pivot pin front lower (2) Set of 2 steel front lower wishbone pivot pins for Serpent 710. | View product >>> |
#802240 | Anti-roll bar levers + ecc. Composite front anti roll bar levers for Serpent 710. Comes supplied with eccenter for fine tuning anti roll bar alignment. | View product >>> |
#802242 | Anti-roll bar rod front male Front male anti roll bar lever with hex drive for easy adjustment. Suitable for Serpent 710. | View product >>> |
#802243 | Anti-roll bar rod front female Front female anti roll bar lever with hex drive for easy adjustment. Suitable for Serpent 710. | View product >>> |
#802260 | Trackrod M3x47mm (2) Trackrod M3x47mm (2) | View product >>> |
#802332 | Driveshaft (2) Set of 2 hardened steel driveshafts that are suitable for both the front and rear of the Serpent 710. | View product >>> |
#802335 | Anti-Roll bar ball 3mm (2) A set of spare 3mm anti-roll bar balls. Comes supplied with grub screws. | View product >>> |
#802342 | Pulley / shim 22T 2sp - side Composite 22T pulley for use on the side of the 2 speed shaft of the Serpent 710. | View product >>> |
#802344 | Pulley 24T 2 sp - center Composite 24T central pulley / shim on the Serpent 710 2 speed shaft. | View product >>> |
#802361 | Bodymount adjustable rear (2) Composite rear adjustable bodymount set complete with mounting screws and body clips. | View product >>> |
#802400 | 2 - speed gearbox LC (no shaft incl) Complete 2 speed LC gearbox set for use on the Serpent 710. Includes everything required with the exception of the 2 speed shaft. Manual can be found in the menu: I-manual under S710. | View product >>> |
#802403 | 2-speed spring (2) Pair of gearbox tension springs for use in the Serpent gearbox. | View product >>> |
#802404 | 2-speed gearbox shoes set LC Complete 2 speed shoes set. Consists of shoes, roller pins, grubscrews, springs and adjustment screws. | View product >>> |
#802455 | 2 - speed gear 55T (2ND) LC Composite 55T fine pitch 2 speed 2nd gear for use on the LC gearbox. | View product >>> |
#802456 | 2 - speed gear 56T (2ND) LC Composite 56T fine pitch 2 speed 2nd gear for use on the LC gearbox. | View product >>> |
#802457 | 2 - speed gear 57T (2ND) LC Composite 57T fine pitch 2 speed 2nd gear for use on the LC gearbox. | View product >>> |
#802459 | 2 - speed gear 59T (1ST) LC Composite 59T fine pitch 2 speed 1st gear for use on the LC gearbox. | View product >>> |
#802460 | 2 - speed gear 60T (1ST) LC Composite 60T fine pitch 2 speed 1st gear for use on the LC gearbox. | View product >>> |
#802461 | 2 - speed gear 61T (1ST) LC Composite 61T fine pitch 2 speed 1st gear for use on the LC gearbox. | View product >>> |
#802500 | Centax 3 clutch-set (excl. Flywheel) Complete Centax 3 clutch system including everything needed to build a complete clutch system with the exception of the flywheel. | View product >>> |
#802501 | Centax - 3 clutch-housing Hardened steel clutch housing for the Centax-3. | View product >>> |
#802504 | Centax - 3 support washer Aluminum Centax 3 support washer. | View product >>> |
#802505 | Centax - 3 spring cup Aluminum spring cup for the Centax 3. | View product >>> |
#802506 | Centax - 3 flywheel 33mm Flywheel for the Centax 3 featuring coating to enable the centrifugal shoes to work freely and knurled around the diameter for best grip on the starter box. | View product >>> |
#802507 | Centax - 3 centrifugal shoes (3) Set of 3 centrifugal shoes for the Centax 3. | View product >>> |
#802509 | Centax-3 clutch shoe yellow New material clutch shoe for use with the Centax-3 clutch system. Increased friction coefficient to handle high-power engines. | View product >>> |
#802514 | Centax-3 clutch housing holder Lightweight aluminium Centax 3 clutch bell gripper. Comes with steel fixing pin. | View product >>> |
#802515 | Pinion gear tool Set of 2 plastic Centax 3 pinion gear tools to help fasten the pinon gears to the bell housing. Fits all gears (16-18T, 20-23T). | View product >>> |
#802517 | Centax - 3 gear - pinion alu. 17T Aluminum 17T Centax 3 1st gear pinion. | View product >>> |
#802518 | Centax - 3 gear - pinion alu. 18T Aluminum 18T Centax 3 1st gear pinion. | View product >>> |
#802520 | Centax-3 Gear Alu 20T Coated aluminium 20T pinion gear for use on the Centax-3. | View product >>> |
#802521 | Centax - 3 gear - pinion alu. 21T Aluminum 21T Centax 3 2nd gear pinion. | View product >>> |
#802522 | Centax - 3 gear - pinion alu. 22T Aluminum 22T Centax 3 2nd gear pinion. | View product >>> |
#802523 | Centax - 3 gear - pinion alu. 23T Aluminum 23T Centax 3 2nd gear pinion. | View product >>> |
#802601 | Front Gear Diff set (Assembled) Pre Assembled front gear diff for the Serpent 710. | View product >>> |
#802602 | Gear Diff FR nylon case L&R Front gear differential casing for Serpent 710, 720. | View product >>> |
#802605 | Gear-axle set 4+2+2 Gear axle set for the optional rear gear differential. Contains 2 large gears, 4 satellite gear, 2 gear axles and 4 shims. | View product >>> |
#802606 | Adaptor geardiff steel (2) Pair of high quality steel adaptors for the optional rear geardiff. | View product >>> |
#802607 | Case gear diff L & R Left and rear composite gear diff casing. | View product >>> |
#802608 | Spares set geardiff (15) Spares set for optional rear gear diff. Contains 4 fastening screws, 1 large O-ring, 2 small o-rings, 2 roll pins and 6 shims. | View product >>> |
#803104 | Decal sheet 720 A4-A5 Pair of Decal sheets that include A5 720 decals and A4 sheet of generic Serpent decals. | View product >>> |
#803105 | Serpent 720 A5 decal sheet A5 sized Serpent 720 decal sheet. | View product >>> |
#803106 | Bracket FR upper left 720 Composite front upper left bracket for use with the Serpent 720. | View product >>> |
#803107 | Bracket FR upper right 720 Composite front upper right bracket for use with the Serpent 720. | View product >>> |
#803108 | Wishbone FR Lower L/R 720 Composite front lower left & right wishbones for use with the Serpent 720. | View product >>> |
#803109 | Pivot inserts frame Full set of composite pivot pin inserts for use with the Serpent 720. | View product >>> |
#803110 | Eccenter for bearing FR (2) Composite front bearing eccenters for use with the Serpent 720. | View product >>> |
#803112 | Bearing block FR L 720 Composite front left bearing block for use with the Serpent 720. | View product >>> |
#803113 | Bearing block FR R 720 Composite front right bearing block for use with the Serpent 720. | View product >>> |
#803114 | Pin FR upper 43.5mm 720 (2) Front upper pivot pin (43.5mm) for use with the Serpent 720. | View product >>> |
#803115 | Battery mount FR 720 Composite front battery mount for use with the Serpent 720. | View product >>> |
#803117 | Bracket brake carbon 720 Carbon brake bracket for use with the Serpent 720. | View product >>> |
#803119 | Brake-pulley adaptor alu 720 Aluminium brake pulley adaptor for use with the Serpent 720. | View product >>> |
#803121 | Wishbone RR lower 720 Composite rear lower wishbones for use with the Serpent 720. | View product >>> |
#803122 | Pin RR lower 49mm (2) Lower rear pivot pin (49mm) for use with the Serpent 720. | View product >>> |
#803123 | Eccenter for bearing RR (2) Composite rear bearing eccenters for use with the Serpent 720. | View product >>> |
#803124 | Support S RR upper carbon Carbon rear upper S support plate for use with the Serpent 720. | View product >>> |
#803125 | U bracket RR carbon 720 Rear carbon U bracket for use with the Serpent 720. | View product >>> |
#803127 | Shock tower RR carbon 720 Carbon rear shock tower for use with the Serpent 720. | View product >>> |
#803128 | Body Support RR 720 Composite rear body mount support for use with the Serpent 720. | View product >>> |
#803129 | Rear plate 720 Composite rear plate for use with the Serpent 720. | View product >>> |
#803130 | Rear upright 720 Composite rear upright for use with the Serpent 720. | View product >>> |
#803132 | Pin body support RR 720 (2) Rear upright upper wishbone mounting pin for use with the Serpent 720. | View product >>> |
#803133 | Holder RR anti-roll bar (2) Composite rear anti-roll bar holders for use with the Serpent 720. | View product >>> |
#803134 | Spacer anti roll bar RR (2) Spacer (2) for the rear anti roll bar. Comes complete with grub screws. | View product >>> |
#803135 | Anti-roll bar RR 2.5mm Rear anti-roll bar (2.5mm) for use with the Serpent 720 and 733. | View product >>> |
#803136 | Pulley / shim 21T 2-speed side Composite 21T pulley/shim for use on the side of the the Serpent 720 2-speed shaft. | View product >>> |
#803137 | Servo mount 720 Composite servo mount for use with the Serpent 720. | View product >>> |
#803138 | Side plate carbon R 720 Carbon right side plate for use with the Serpent 720. | View product >>> |
#803139 | Side plate carbon L 720 Carbon left side plate for use with the Serpent 720. | View product >>> |
#803145 | Shock tower FR carbon 720 Front carbon shock tower for use with the Serpent 720. | View product >>> |
#803146 | Nose plate 720 Composite front nose plate, containing the downstop adjustment and transponder mount, for the Serpent 720. | View product >>> |
#803153 | Radio plate carbon 720 Carbon radio plate for use with the Serpent 720. | View product >>> |
#803154 | Foam Bumper 720 Shaped foam bumper for use on the Serpent 720. | View product >>> |
#803155 | Bumper plate upper 720 Composite upper bumper plate for use with the Serpent 720. | View product >>> |
#803156 | Nylon set FR 720 Complete front nylon set for use with the Serpent 720. Set contains the following parts: 2 x Steering blocks 2 x Lower front wishbones 2 x Upper front wishbones 1 x Nose plate 1 x Upper bumper plate 1 x Lower bumper plate | View product >>> |
#803157 | Nylon set RR 720 Complete rear nylon set for use with the Serpent 720. Set contains the following parts: 2 x Rear uprights 2 x Lower rear wishbones 1 x Body support | View product >>> |
#803158 | 2-speed shaft 710/720 2-speed shaft for use with the Serpent 710/720. | View product >>> |
#803160 | Gear-Diff RR 720 47T Rear gear differential with 47T pulley, suitable for the Serpent 720. | View product >>> |
#803161 | Gear-diff RR nylon 47T Composite casing for the 47T rear gear differential. | View product >>> |
#803163 | Bumper plate lower 720 Composite lower bumper plate for use with the Serpent 720. | View product >>> |
#803164 | Bearing block RR L 720 Composite rear left bearing block for use with the Serpent 720. | View product >>> |
#803165 | Bearing block RR R 720 Composite rear right bearing block for use with the Serpent 720. | View product >>> |
#803166 | Bumper LeMans type Nylon, crash resistant bumper for Serpent 1/10th scale cars. Suitable for use with LeMans/GTP body shell. | View product >>> |
#803168 | Anti-roll bar rear 2.3mm 2.3mm rear anti roll bar for the Serpent 720/733. | View product >>> |
#803172 | Servo saver set nylon 710/720 Composite servo saver set for use with the Serpent 710 & 720. | View product >>> |
#803175 | Bracket radioplate support alu Aluminium Radio plate support bracket for use on the Serpent 710. Comes with fastening screws. | View product >>> |
#803177 | Spacer alu 6x5.5x3.1 (2) Aluminium spacers (2) for the upper rear camber link on the Serpent 720. | View product >>> |
#803192 | Servo Saver set adj. Ackerman 720 Composite servo saver for the Serpent 720 with optional Ackerman inserts. | View product >>> |
#803198 | Adjusting nut nylon for 8.5mm ball (10) Set of 10 nylon end play adjusting nuts for use with the cars 8.5mm pivot balls. | View product >>> |
#803222 | Gear 2-Speed WC (2nd) 54T 54T 2nd gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803223 | Gear 2-Speed WC (2nd) 55T 55T 2nd gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803224 | Gear 2-Speed WC (2nd) 56T 56T 2nd gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803225 | Gear 2-Speed WC (1st) 59T 59T 1st gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803226 | Gear 2-Speed WC (1st) 60T 60T 1st gear for the 1/10th scale WC 2-Speed gearbox. Replacement part nr: 803225 | View product >>> |
#803227 | Gear 2-Speed WC (1st) 61T 61T 1st gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#808214 | Spacer-set caster (3) Set of 2 nylon frames with 1-2-4mm caster shims. The shims can be placed in front or behind the upper suspension arm, therewith changing the caster angle of the front suspension. | View product >>> |
#808347 | Pivot-ball 8.5mm alu coated (8) Hard anodised + PTFE coated aluminium pivot balls. Ultra lightweight and long wearing. Available in packs of eight | View product >>> |
#901255 | Belt tensioner Alu. belt tensioner S950, S835, S705, VETEQ. | View product >>> |
#901355 | Brake pads, set of 4 Brake pads, made of special friction material, blue. Must be glued onto steel brake plates 901356. Set of 4. | View product >>> |
#901356 | Steel brake plates VETEQ brake plates made of spring steel. Interchangeable with Vector, Impact and Impulse brake plates. Old style Vector and Impact brake plates (9602) cannot be used on VETEQ. Set of 2. | View product >>> |
#902411 | Drive-flange alu with owb Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
#902412 | Adaptor 2-speed LC Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing. | View product >>> |
#902413 | Carrier 2nd Gear LC Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox. | View product >>> |
#902416 | 2-speed shoe-set LC II A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only. | View product >>> |
#902420 | Roller pin steel 5X5 (2) A pair of steel roller pins for use in the LC gearbox. Replaced by 110202 Pin 5x5 (10) | View product >>> |
#902421 | Needle 3x13.8 (4) Set of 4 Roll pins for use with the new LC Gearbox 2 speed adapter. Replaced by 110203 Pin 3x14 (10) | View product >>> |
#903164 | Shock-set RCC front (2) Complete pre assembled short RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touring cars. | View product >>> |
#903165 | Shock-set RCC long (2) Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
#903166 | Shock rod short (2) A set of 2 short shock rods for use in RCC shocks. | View product >>> |
#903167 | Shock rod long (2) A set of 2 long shock rods for use in RCC shocks. | View product >>> |
#903168 | Nylon parts frame shocks RCC Complete set (4) of composite RCC shock absorber components. | View product >>> |
#903169 | Insert shock (2) A set of 2 RCC composite shock absorber inserts. New: Use 903336 and 903332 instead | View product >>> |
#903171 | O-ring 10x1 (4) Set of 4 o-rings for use in the RCC shock absorbers. | View product >>> |
#903175 | Foam insert (4) Set of 4 foam inserts for use in the RCC shock absorbers. | View product >>> |
#903177 | Nut shock alu (2) Set of 2 anodised aluminium shock absorber nuts. Suitable for the RCC shock absorbers. | View product >>> |
#903178 | Body alu shock FR (2) A pair of front aluminium RCC shock bodies. | View product >>> |
#903179 | Body alu shock RR (2) A pair of rear aluminium RCC shock bodies. | View product >>> |
#903186 | C + G Clip + washer RCC shocks (12) Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks. | View product >>> |
#903200 | O-ring 3.3 x 1.5 RCC shocks (10) Set of 10 purple o-rings for use in the RCC shock absorbers. | View product >>> |
#903230 | Ball joints 5.8mm frame Set of twenty 5.8mm composite ball joints. | View product >>> |
#903231 | Ball joints set 14+6+2 Set of composite ball joints that includes 14 x 6mm ball joints, 6 x shorter shock end ball joints and 2 x 4mm ball joints. The balljoints feature a text with TOP to indicate right position to press in the ball, for perfect fit. | View product >>> |
#903237 | Anti-roll bar blade RR soft (2) Pair of soft rear anti roll bar blades. | View product >>> |
#903333 | X-ring RCC 2009 Shock (10) X-Ring for the 2009 RCC Shock | View product >>> |
#903334 | Shock-set RCC-X short (2) Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
#903335 | Shock-set RCC-X long (2) Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
#903336 | 903336 Insert RCC 2009 shock (2) Shock bottom for the X-Ring for the 2009 RCC shock | View product >>> |