> 1/8 · Formula · 1/8 offroad · 1/10 200mm · 1/10 235mm

> Serpent 733-EVO 1/10 scale 4wd (#804000)

> Description · News (170) · Specifications · Images (89) · Downloads (5) · Spares (175) · Optionals (154) · Setups (23)

Brand:
Serpent

Product Type:
Gas Cars > 1/10 200mm

Serpent 733-EVO Serpent 200mm racecar with 4-wheel drive, 2-speed gearbox, independent suspension. 733-EVO news: - Direct Link System - SFC rear end; Serpent Flex Control rear end, - the rear anti-roll bar ball-bearings are seated in delrin bushings to isloate vibrations - the 2-speed shaft bearings are seated in delrin inserts for optimized fit and to isolate vibrations. - Mono-type engine mount - Mono-type ventilated brake-disk Developed, engineered and tested by Michael Salven, in close cooperation with Team Serpent drivers. Serpent, the racing experience

Related products


View: Text | Images

> Optional parts

#1434Pressure nipple angled
Right angled back pressure nipple. Suitable for all Serpent fuel tanks.
View product >>>
#160102Shock RCM shaft short (2)
Shock RCM shaft short (2)
View product >>>
#160104Shock RCM body alu (2)
Shock RCM body alu (2)
View product >>>
#160105Shock RCM bottom (2)
Shock RCM bottom (2)
View product >>>
#160106Shock RCM top nut (2)
View product >>>
#160107Shock RCM membrame (4)
Shock RCM membrame (4)
View product >>>
#160109Shock RCM bushing machined (8)
Shock RCM bushing machined (8) Can be used instead of the moulded bushings (#160108) , for more precise shockaction.
View product >>>
#160110Shock bottom O-ring (8)
Shock bottom O-ring (8) Supersmooth and super sealing red color silicone o-rings.
View product >>>
#160111Shock RCM parts frame nylon short (14)
Shock RCM parts frame nylon short (14)
View product >>>
#160114Shockset RCM on-road plastic short (2)
Shockset RCM on-road plastic short (2)
View product >>>
#160115Shock RCM shaft short tin coated (2)
Shock RCM shaft short tin coated (2)
View product >>>
#160297Spring grey L23 (2.6/14.8) TC (2)
Spring grey L23 (2.6/14.8) TC (2)
View product >>>
#160298Spring black L23 (2.9/16.5) TC (2)
Spring black L23 (2.9/16.5) TC (2)
View product >>>
#160299Spring green L23 (3.5/19.9) TC (2)
Spring green L23 (3.5/19.9) TC (2)
View product >>>
#160300Spring white L23 (2.3/13) (2)
Pair of 23mm long white springs (2.3/13).
View product >>>
#160301Spring yellow L23 (2.8/16) (2)
Pair of 23mm long yellow springs (2.8/16).
View product >>>
#160302Spring orange L23 (3.4/19.5) (2)
Pair of 23mm long orange springs (3.4/19.5).
View product >>>
#160303Spring red L23 (4.1/23.5) (2)
Pair of 23mm long red springs (4.1/23.5).
View product >>>
#160304Spring pink L23 (4.9/28) (2)
Pair of 23mm long pink springs (4.9/28).
View product >>>
#160305Spring blue L23 (5.8/33) (2)
Pair of 23mm long blue springs (5.8/33).
View product >>>
#160306Spring purple L23 (6.8/39) (2)
Pair of 23mm long purple springs (6.8/39).
View product >>>
#160307Spring green L23 (8/45.5) (2)
Pair of 23mm long green springs (8/45.5).
View product >>>
#160308Spring grey L23 (9/51.5) (2)
Pair of 23mm long grey springs (9/51.5).
View product >>>
#160309Spring black L23 (10/57) (2)
Pair of 23mm long black springs (10/57).
View product >>>
#160310Spring set L23 (5)
Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs.
View product >>>
#1886Decal sheet 1/10 black-white (2)
High quality decal-sheet size 30x20cm. Serpent logo's. To apply to bodies. Replacement part nr: www.serpent.com/190401
View product >>>
#1888Decal sheet 1/10 chrome (2)
High quality decal-sheet size 30x20cm. Chrome. Serpent logo's. To apply to 1/10 scale bodies.
View product >>>
#190546Serpent high speed fuel gun
Serpent high speed fuel gun
View product >>>
#401433Weight set brass 5gr - 12gr - 20gr (2+1+1)
Weight set brass 5gr - 12gr - 20gr (2+1+1) Set of weight set in brass material 5gr - 12gr - 20gr (2+1+1)Use to fine-tune the weight balance with all electronics mounted as well. The 20g and 12g are made to mount near the center line of the car, close to the belt. Made for the Serpent 411 , and the holes in the chassis to mount them are already available.
View product >>>
#600157Collar double (2)
Collar double (2)
View product >>>
#600484Antirollbar spacer 3mm alu (2)
Antirollbar spacer 3mm alu (2)
View product >>>
#801214Wheelaxle Pro (2)
Special light-weight wheel axle with double drive slots. Made of high-tensile and heat treated steel. Interchangeable with standard axles 801215. Fits Serpent 710 front and rear, Serpent 705 only front.
View product >>>
#802212Body posts adjustable front alu (2+1)
Set of 3 aluminium body posts for use on front of Serpent 1/10 cars. Comes with required fastener.
View product >>>
#802255Wheel hexagon alu orange (4)
Set of 4 orange anodised aluminium hex wheel adaptors for use on Serpent 200mm chassis'. Includes hex head screw for mounting.
View product >>>
#802261Trackrod M3x47mm Titanium (2)
Trackrod M3x47mm (2) Titanium
View product >>>
#802362Body posts adjustable rear alu (2)
Set of 2 aluminium body posts for Serpent 1/10. Comes with fasteners.
View product >>>
#802508Centax - 3 clutch shoe XP
XP clutch shoe for use with the Centax 3.
View product >>>
#802515Pinion gear tool
Set of 2 plastic Centax 3 pinion gear tools to help fasten the pinon gears to the bell housing. Fits all gears (16-18T, 20-23T).
View product >>>
#803168Anti-roll bar rear 2.3mm
2.3mm rear anti roll bar for the Serpent 720/733.
View product >>>
#803200Rod Set 16mm / ball joints (2)
Upper rear short track rod set for the Serpent 720, that contains 4 ball joints and 2 short track rods.
View product >>>
#803205Centax-3 clutch shoe red
Red clutch shoe for Centax-III.
View product >>>
#803208Centax-3 flywheel 31mm
31mm diameter Centax-3 flywheel.
View product >>>
#803235Pinion Centax-3 WC (1st) 18T
Hard coated aluminium 18T 1st gear pinion for the Centax-3 WC clutch system.
View product >>>
#804104Belt Front 40S3M195 Low Friction
Low friction type Kevlar re-inforced drive-belt 4mm wide, 195T. (804104/803246)
View product >>>
#804105Belt side 40S3M378 Low Friction
Low friction type Kevlar re-inforced drive-belt 4mm wide, 378T.
View product >>>
#804106Belt rear 40S3M186 Low Friction
Low friction type 4mm Kevlar re-inforced drive-belt, set 186T.
View product >>>
#804107Belt set 733 Low Friction (3)
Low friction type Kevlar re-inforced drive-belts, set of 3. 5mm wide 186T rear belt, 4mm wide 195T front belt and 378T side belt.
View product >>>
#804133Suspension bracket rr fr alu V1
Suspension bracket in CNC machined high grade alu. Anodised. Rear side, front one V1, which is the narrow version.
View product >>>
#804141Anti-rollbar FR 1.8mm
Precision made spring-steel front anti-roll bar in 1.8mm
View product >>>
#804142Anti-rollbar FR 2.2mm
Precision made spring-steel front anti-roll bar in 2.2mm
View product >>>
#804143Anti-rollbar FR 2.5mm
Precision made spring-steel front anti-roll bar in 2.5mm
View product >>>
#804144Anti-rollbar FR 2.8mm
Precision made spring-steel front anti-roll bar in 2.8mm
View product >>>
#804177Anti-rollbar set front (4)
Set includes 4 thicknesses of front anti-roll bars. 1.8, 2.2, 2.5 and 2.8
View product >>>
#804184Front alu shaft with one-way bearings
Precision machined front alu shaft with high quality one-way bearings for Serpent 733. Can be easy locked with pins as needed. Supplied with springsteel one-way adaptors, o-rings, pins and steel screws.
View product >>>
#804190Bumper foam wide 733 (2)
Wide version foam front bumpers.
View product >>>
#804192Chassis stiffner rear alu
Chassis stiffner alu , CNC machined from high grade alu. For Serpent 733, a precision machined aluminium, anodised rear end stiffner. To be mounted between the rear brackets and the legs of the lower engine mont support/chassis stiffner. The long screws replace the ones as standard in the car, mounted from the top. The short csh ones are mounted from the lower side, through the chassis.
View product >>>
#804193Radioplate support alu
CNC machined, anodised alu radioplate supports for Serpent 733.
View product >>>
#804194Wheel hexagon +1mm (4)
Wheel hexagon +1mm (4) to create more offset. Replacement part nr: 500689
View product >>>
#804195Wheel hexagon -1mm (4)
Wheel hexagon -1mm (4) to create less offset.
View product >>>
#804197Pulley 21T mid side alu
Precision machined and hard anodised alu pulley 21T mid side.
View product >>>
#804198Pulley 20T 2-sp center alu
For Serpent 733. Precision machined hard anodized alu brake pulley adaptor with integrated 20T pulley. Light-weight, very low wear and due to anodizing, less dirt and dust will stick to the surface. Direct replacement for standard alu adaptor and nylon 20T gear 804169 and 804112.
View product >>>
#804199Pulley 21T 2-sp side alu
Precision machined and hard anodised alu pulley 21T 2-speed - side.
View product >>>
#804203Belt rear 50S3M186 Low Friction
Low friction type 5mm Kevlar re-inforced drive-belt, set 186T.
View product >>>
#804204Flange alu for axle front solid / hardware
Flange alu for axle front solid / hardware. Available: end october 2009
View product >>>
#804205Cvd Wheelaxle pro (2)
Cvd Wheelaxle pro (2) Spring steel, lightweight, durable, precision machined and polished.
View product >>>
#804206Wishbone rear lw L+R Hard
Optional composite nylon wishbone rear lower, L+R the same, Hard type.
View product >>>
#804207Wishbone front lw L+R Hard
Optional composite nylon wishbone front lower, L+R, Hard type.
View product >>>
#804208Wishbone front up L+R Hard
Optional composite nylon wishbone front upper, L+R same, Hard type.
View product >>>
#804209Suspensionset nylon (6) Hard
Optional composite nylon wishbone set (6) Front upper, L+R same, Hard type. Front lower, L+R , Hard type. Rear lower , L+R same, Hard type.
View product >>>
#804210Suspension bracket FR alu L+R (2)
Suspension bracket from aluminium L+R (2) Precision machined front suspension brackets for your Serpent 733. Standard nylon inserts fit smoothly. Comes grey anodized. Makes front end stiffer.
View product >>>
#804211Chassis side stiffner alu
Chassis side stiffner alu. Side stiffner for the Serpent 733, in precison machined aluminum. Countersunk holes, very light, great looks. Comes grey anodized. Direct replacement, for the nylon version. Will keep spacing between Centax gears and 2-speed gears more constant.
View product >>>
#804213Servo saver top + bottom alu (2)
Servo saver top + bottom alu (2) Precision machined aluminum servo-saver top and bottom part for Serpent 733. Very smooth servo saver action, less flex, very light and strong, precision fit of Ackermann inserts. Grey anodized finish. Direct replacement of nylon version.
View product >>>
#804214Steering lever 23T alu
Steering lever 23T alu
View product >>>
#804215Steering lever 24T alu
Steering lever 24T alu
View product >>>
#804216Steering lever 25T alu
Steering lever 25T alu
View product >>>
#804219Bearingblock rear upper 733 V2
Bearingblock rear upper 733 V2. With these bearingblocks you can connect them to the 2-speed bearingblocks to make the rear end stiff.
View product >>>
#804223Direct Link-Set DLS
The Direct Link system is activated during cornering mainly, whereby the outer suspension forces are transfered partially to the inner wheel too, with a pivot-link system. The set includes the carbon fibre camber bracket, 2 carbon fibre brackets for the lower arms, strong springs steel push rods, cnc machined alu pivots with precison fit ball-bearings, aluminum bearing shafts and spacers, a frame op top quality ball-joints ( with some spares ones ) and hardware as needed. A full instruction sheet is provided too.
View product >>>
#804225Support brackets carbon DLS (2)
Support brackets carbon DLS (2)
View product >>>
#804226Pivot lever alu (2)
Pivot lever alu (2)
View product >>>
#804228Connectorset rear 733 (2+2)
Connectorset rear 733 (2+2) Set of 2 rubber and 2 alu connectors with screws as needed. Use together with 804222
View product >>>
#804229Upright alu / inserts 733 (2+2)
Upright alu / inserts 733 (2+2)
View product >>>
#804230Insert upright alu 733 (2)
Insert upright alu 733 (2)
View product >>>
#804232Shim 3x6x3 (4)
Shim 3x6x3 (4) Repalced by 110417 Shim 3X6X3 (10)
View product >>>
#804233Chassisplate 733 3mm hard anodised
CNC machined 3mm aerospace quality 7075 T6 aluminium. Closed design, to create stiff chassis. Chamfered edges, countersunk holes, recess for transponder mounting, cooling holes for the engine. Hard anodised.
View product >>>
#804234Centax-3 clutchbell alu coated
Centax-3 clutchbell alu nickel coated
View product >>>
#804235Gearbox SL6 for 733
Complete new gearbox for Serpent 733. Its standard on the 733-Team Edition and fits earlier models of 733 cars. The all new design gearbox has very low inertia, lighter adaptor, lighter aluminum bell and one-way adaptor with German oneway, new steel shaft, smaller shoes and new beautifully designed gears. Includes rod type side stiffner with balljoints.
View product >>>
#8042362-speed adaptor SL6
2-speed adaptor for the SL6 gearbox
View product >>>
#8042372-speed shoe SL6 (2)
2-speed shoe for the SL6 gearbox (2)
View product >>>
#8042382-speed drive flange SL6
Replaced by 804378
View product >>>
#8042392-speed housing SL6
2-speed housing for the SL6 gearbox
View product >>>
#8042402-speed shaft SL6
2-speed shaft for the SL6 gearbox
View product >>>
#804249Centax-3 set Ultra 1/10
Complete Centax-3 clutch-set for 1/10 scale 733, with alu clutchbell, XP clutch shoe, hard spring and machined flyweights. Lighter and more punch.
View product >>>
#804250Centax True motion clutch set 1/10
Centax True motion clutch set 1/10
View product >>>
#804251Pivotball 5.8mm double straight alu coated (4)
Pivotball 5.8mm double straight alu coated (4)
View product >>>
#804252Pivotball 5.8mm alu coated (4)
Pivotball 5.8mm alu coated (4) with hexagon.
View product >>>
#804253Pivotball 5.8mm alu coated long (4)
Pivotball 5.8mm alu coated long (4)
View product >>>
#804254Anti-roll bar ball 3.0mm alu (2)
Anti-roll bar ball 3.0mm alu (2)
View product >>>
#804255Flywheel Centax True Motion 1/10
Flywheel Centax True Motion 1/10
View product >>>
#804256Clutch support disk Centax True Motion 1/10
Clutch support disk Centax True Motion 1/10
View product >>>
#804257Geardiff uni 1/10 GP
Geardiff uni 1/10 GP
View product >>>
#804258Geardiff uni 1/10 GP housing
Geardiff uni 1/10 GP housing
View product >>>
#804259Geardiff uni 1/10 GP revision set
Geardiff uni 1/10 GP revision set
View product >>>
#804260Bearingblock 747 FR L
Bearingblock 747 FR L
View product >>>
#804261Bearingblock 747 FR R
Bearingblock 747 FR R
View product >>>
#804262Chassis 747 3mm
Chassis 747 3mm
View product >>>
#804264Shocktower 747 carbon RR
Shocktower 747 carbon RR Use 804306 instead with SS shocks.
View product >>>
#804265Bearingblock 2sp-L 747
Bearingblock 2sp-L 747
View product >>>
#804266Brake pin 5x9 (2)
Brake pin 5x9 (2)
View product >>>
#804267Suspension bracket 747 FR UP (2)
Suspension bracket 747 FR UP (2)
View product >>>
#804268Bracket middle axle 747
Bracket middle axle 747
View product >>>
#804269Suspension bracket 747 FR LW (2)
Suspension bracket 747 FR LW (2)
View product >>>
#804270Servomount 747 (2)
Servomount 747 (2)
View product >>>
#804271Radioplate support alu 747
Radioplate support alu 747. CNC machined radioplate support for the Serpent 747, made from 7075 T6 aluminium and grey anodized. This support will increase chassis stiffeness in the central section of the car. The 2 mounting lugs on the left side in this image, allow the use of a carbon side stiffener (#804272), required in case you want to test less flex.
View product >>>
#804272Sideplate carbon 747 R
Sideplate carbon 747 R CNC machined Side stiffener for the Serpent 747, made from high quality carbon fibre, with countersunk holes. This part in combination with the 804271 aluminium radioplate support will increase chassis stiffness in the central section of the car.
View product >>>
#804273Chassis weight 25gr 747
Chassis weight 25gr 747
View product >>>
#804274Radioplate 747 carbon
Radioplate 747 carbon
View product >>>
#804275Exhaust mount spring (2)
Exhaust mount spring (2)
View product >>>
#804276Brakedisc 747 1mm
Brakedisc 747 1mm
View product >>>
#804277Shock bracket carbon L+R RR
CNC machined Shock-mount extensions for the Serpent 747, made from high quality carbon fibre, with countersunk holes, and the correct fasteners. Enables to mount the shocks more to the outside, making the shock more “harder”, progressive, increasing rear end grip, especially when using a softer rear spring.
View product >>>
#804278Anti-rollbar bracket carbon RR (2)
CNC machined anti-rollbar mount extensions for the Serpent 747, made from high quality carbon fibre. Enables to mount the ant-roll bar more to the outside, making the anti-roll bar “ harder” and more progressive
View product >>>
#804279Wishbone 747 FR UP (2)
Wishbone 747 FR UP (2)
View product >>>
#804280Bearing bracket FR UP
Bearing bracket FR UP
View product >>>
#804281Wishbone 747 RR LW medium (2)
Wishbone 747 RR LW medium (2)
View product >>>
#804282Upright 747 -748 (2)
Upright 747 and 748 (2)
View product >>>
#804283Bumper 747
Bumper 747
View product >>>
#804284Wheelhexagon -1mm (2)
Wheelhexagon -1mm (2)
View product >>>
#804285Brake spring 747 (2)
Brake spring 747 (2)
View product >>>
#804286Antiroll bar wire 1.8mm (2)
Anti-roll bar RR 1.8mm
View product >>>
#804287Anti-roll bar RR 1.9mm
Anti-roll bar RR 1.9mm
View product >>>
#804288Anti-roll bar RR 2.0mm
Anti-roll bar RR 2.0mm
View product >>>
#804289Anti-roll bar RR 2.1mm
Anti-roll bar RR 2.1mm
View product >>>
#804290Anti-roll bar RR 2.2mm
Anti-roll bar RR 2.2mm
View product >>>
#804291Brake lever on-road alu
Brake lever on-road alu for Serpent 1/10 and 1/8.
View product >>>
#804293Body support washers med + high (5+5)
Body support washers med + high (5+5)
View product >>>
#804294Wishbone 747 RR LW hard (2)
Wishbone 747 RR LW hard (2)
View product >>>
#804295Bumperplate carbon 747
CNC machined upper bumper for Serpent 747, made from high quality carbon fibre. Comes complete with alu posts and fasteners. Improved looks and light too. Direct replacement of current nylon one. Can also be fitted to Serpent 733, in combination with the lower 747 bumper.
View product >>>
#804296Body support rear (2)
Body support extra rear (2)
View product >>>
#804300Chassis 747 hard coated
Chassis 747 hard coated ( fits also 733)
View product >>>
#804301Geardiff rear pully alu 40T
Geardiff rear pully alu 40T anodised, with pressed on sides with holes to make lighter and allow dirt to move out easy.
View product >>>
#8043672-speed set SL6 XLI
2-speed set SL6 XLI
View product >>>
#8043682-speed adaptor SL6 XLI
2-speed adaptor SL6 XLI
View product >>>
#8043692-speed shoe (2) SL6 XLI
2-speed shoe (2) SL6 XLI
View product >>>
#8043702-speed housing SL6 XLI
2-speed housing SL6 XLI
View product >>>
#8043712-speed spring (2) SL6 XLI
2-speed spring (2) SL6 XLI
View product >>>
#804390Diff set fr 748 V2
Diff set fr 748 V2
View product >>>
#804407Camberlink riser 1/10 (2)
Camberlink riser 1/10 (2)
View product >>>
#804527Excenter set rr alu (2) S7XX
Excenter set rr alu (2) S7XX
View product >>>
#902119Receiver bracket S950R
Composite receiver bracket for the Serpent 950R.
View product >>>
#903226Shock rod RCC short Ti-Ni (2)
Pair of short Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers.
View product >>>
#903232Spring Support alu light (4)
Set of 4 lightweight aluminium spring supports for Serpent shock absorbers.
View product >>>
#903341Antirollbar ball 3mm (2)
Antirollbar ball 3mm (2)
View product >>>
#903342Antirollbar ball 2,5mm (2)
Antirollbar ball 2,5mm (2)
View product >>>
#903343Antirollbar spacer 3mm (2)
Antirollbar spacer 3mm (2)
View product >>>
#903344Antirollbar spacer 2.5mm (2)
Antirollbar spacer 2.5mm (2)
View product >>>