Serpent 733-EVO Serpent 200mm racecar with 4-wheel drive, 2-speed gearbox, independent suspension. 733-EVO news: - Direct Link System - SFC rear end; Serpent Flex Control rear end, - the rear anti-roll bar ball-bearings are seated in delrin bushings to isloate vibrations - the 2-speed shaft bearings are seated in delrin inserts for optimized fit and to isolate vibrations. - Mono-type engine mount - Mono-type ventilated brake-disk Developed, engineered and tested by Michael Salven, in close cooperation with Team Serpent drivers. Serpent, the racing experience
#1434 Pressure nipple angled | #160102 Shock RCM shaft short (2) | #160104 Shock RCM body alu (2) | #160105 Shock RCM bottom (2) | #160106 Shock RCM top nut (2) | #160107 Shock RCM membrame (4) |
#802508 Centax - 3 clutch shoe XP | #802515 Pinion gear tool | #803168 Anti-roll bar rear 2.3mm | #803200 Rod Set 16mm / ball joints (2) | #803205 Centax-3 clutch shoe red | #803208 Centax-3 flywheel 31mm |
#804141 Anti-rollbar FR 1.8mm | #804142 Anti-rollbar FR 2.2mm | #804143 Anti-rollbar FR 2.5mm | #804144 Anti-rollbar FR 2.8mm | #804177 Anti-rollbar set front (4) | #804184 Front alu shaft with one-way bearings |
#804190 Bumper foam wide 733 (2) | #804192 Chassis stiffner rear alu | #804193 Radioplate support alu | #804194 Wheel hexagon +1mm (4) | #804195 Wheel hexagon -1mm (4) | #804197 Pulley 21T mid side alu |
#804214 Steering lever 23T alu | #804215 Steering lever 24T alu | #804216 Steering lever 25T alu | #804219 Bearingblock rear upper 733 V2 | #804223 Direct Link-Set DLS | #804225 Support brackets carbon DLS (2) |
#804226 Pivot lever alu (2) | #804228 Connectorset rear 733 (2+2) | #804229 Upright alu / inserts 733 (2+2) | #804230 Insert upright alu 733 (2) | #804232 Shim 3x6x3 (4) | #804233 Chassisplate 733 3mm hard anodised |
#804234 Centax-3 clutchbell alu coated | #804235 Gearbox SL6 for 733 | #804236 2-speed adaptor SL6 | #804237 2-speed shoe SL6 (2) | #804238 2-speed drive flange SL6 | #804239 2-speed housing SL6 |
#804260 Bearingblock 747 FR L | #804261 Bearingblock 747 FR R | #804262 Chassis 747 3mm | #804264 Shocktower 747 carbon RR | #804265 Bearingblock 2sp-L 747 | #804266 Brake pin 5x9 (2) |
#804273 Chassis weight 25gr 747 | #804274 Radioplate 747 carbon | #804275 Exhaust mount spring (2) | #804276 Brakedisc 747 1mm | #804277 Shock bracket carbon L+R RR | #804278 Anti-rollbar bracket carbon RR (2) |
#804279 Wishbone 747 FR UP (2) | #804280 Bearing bracket FR UP | #804281 Wishbone 747 RR LW medium (2) | #804282 Upright 747 -748 (2) | #804283 Bumper 747 | #804284 Wheelhexagon -1mm (2) |
#804285 Brake spring 747 (2) | #804286 Antiroll bar wire 1.8mm (2) | #804287 Anti-roll bar RR 1.9mm | #804288 Anti-roll bar RR 2.0mm | #804289 Anti-roll bar RR 2.1mm | #804290 Anti-roll bar RR 2.2mm |
#804291 Brake lever on-road alu | #804293 Body support washers med + high (5+5) | #804294 Wishbone 747 RR LW hard (2) | #804295 Bumperplate carbon 747 | #804296 Body support rear (2) | #804300 Chassis 747 hard coated |
#804301 Geardiff rear pully alu 40T | #804367 2-speed set SL6 XLI | #804368 2-speed adaptor SL6 XLI | #804369 2-speed shoe (2) SL6 XLI | #804370 2-speed housing SL6 XLI | #804371 2-speed spring (2) SL6 XLI |
#804390 Diff set fr 748 V2 | #804407 Camberlink riser 1/10 (2) | #804527 Excenter set rr alu (2) S7XX | #902119 Receiver bracket S950R | #903226 Shock rod RCC short Ti-Ni (2) | #903232 Spring Support alu light (4) |
#903341 Antirollbar ball 3mm (2) | #903342 Antirollbar ball 2,5mm (2) | #903343 Antirollbar spacer 3mm (2) | #903344 Antirollbar spacer 2.5mm (2) |