Serpent 733-EVO Serpent 200mm racecar with 4-wheel drive, 2-speed gearbox, independent suspension. 733-EVO news: - Direct Link System - SFC rear end; Serpent Flex Control rear end, - the rear anti-roll bar ball-bearings are seated in delrin bushings to isloate vibrations - the 2-speed shaft bearings are seated in delrin inserts for optimized fit and to isolate vibrations. - Mono-type engine mount - Mono-type ventilated brake-disk Developed, engineered and tested by Michael Salven, in close cooperation with Team Serpent drivers. Serpent, the racing experience
#1070 | Grommet rubber soft (4) High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes. | View product >>> |
#110405 | Nut nylock M4 flanged (10) Nut nylock M4 flanged (10) | View product >>> |
#1311 | Ball-bearing 5x8x2.5 (2) High quality ball bearing stainless steel. | View product >>> |
#1312 | Ballbearing 5x8x2.5 flanged Miniature ballbearing with flange, used in Centax and standard clutch. Size 5x8mm | View product >>> |
#1315 | Ball-bearing 5x10x4 (2) High quality ball bearing stainless steel. | View product >>> |
#1320 | Ballbearings 6x10 flanged (2) Miniature ballbearings used in 2-speed clutch bell. Size 6x10mm. | View product >>> |
#1342 | Ball - bearing 6 x 13 HS Purple (2) High quality ball bearing with removable seal to aid cleaning and reduce weight. | View product >>> |
#1344 | Ball-bearing 10x15x4 (2) High quality ball bearing stainless steel. | View product >>> |
#1346 | Ball - bearing 12x18x4 (2) High quality ball bearing with removable seal to aid cleaning and reduce weight. | View product >>> |
#1377 | Thrust-bearing 5x10 High Quality thrust bearing for use with the Centax-II. | View product >>> |
#1493 | Pressure nipple M3 (4) | View product >>> |
#1494 | Silicone tubing 2x5mm 50 cm, transparent Special fuel resisitant silicone fuel line, size 2x5mm (internal diameter 1.5mm). Length 50cm. Color: transparent. | View product >>> |
#160122 | Shock balljoint short on-road (2) Shock balljoint short on-road (2) | View product >>> |
#1602 | Tank-clips small (10) Packet of 10 small body clips for mounting the fuel tank. Can also be used as body-clips for smaller rc cars. | View product >>> |
#1639 | Collar alu 2.1+setscrew (4) Collars to use for the brake and throttlelinkages. | View product >>> |
#1647 | Steel balls 6mm (4) | View product >>> |
#1649 | Pivotball 5.8mm (20) Pack of 20 5.8mm Balls pivot balls with hex drive. | View product >>> |
#1650 | Pivotball 5.8mm (4) Pivotball 5.8mm (4) | View product >>> |
#1667 | Body-clip medium (10) Medium sized body-clips. 10 in a bag. In use for body-posts Serpent 710. | View product >>> |
#401134 | Ball bearing 4x7 (2) Pair of 4x7 ball bearings. | View product >>> |
#411063 | Pivot ball threaded upper arm (2) A pair of upper arm threaded Pivot balls. | View product >>> |
#600117 | Tank cap seal silicone (2) Tank cap seal silicone (2) | View product >>> |
#6503 | Cone flywheel 7mm long (3) Universal flywheel cone, set of 3. | View product >>> |
#6582 | Centax clutchnut Replacement parts for Centax clutch system. | View product >>> |
#6583 | Centax pre-load adjusting nut Replacement parts for Centax clutch system. | View product >>> |
#6626 | Coilsprings and screws 2-speed Set of coilsprings and screws for 2-speed clutch shoes. Used for all Impact and Vector models. Lighter springs for Impulse gearbox available 801412. | View product >>> |
#801215 | Wheelaxle front (2) Wheel-axle for Serpent Impulse, 705, 710, 720, 733. Hardened spring-steel, precision slots and threading. | View product >>> |
#801217 | Wheelnut M4, flanged (4) use 110402 or 110452 | View product >>> |
#801218 | Wheel hexagon alu 0mm (2) Alu. hex wheel adapters, anodized. Precision machined. Offset 0. | View product >>> |
#801219 | Pivotball 8.5mm short (4) Set of four short aluminum 8.5mm pivot balls for use on the Serpent 705. | View product >>> |
#802211 | Bodymount adjustable front (3) Full set of adjustable front body posts including the the third centre mount. Comes complete with mounting screws and body clips. | View product >>> |
#802260 | Trackrod M3x47mm (2) Trackrod M3x47mm (2) | View product >>> |
#802332 | Driveshaft (2) Set of 2 hardened steel driveshafts that are suitable for both the front and rear of the Serpent 710. | View product >>> |
#802335 | Anti-Roll bar ball 3mm (2) A set of spare 3mm anti-roll bar balls. Comes supplied with grub screws. | View product >>> |
#802352 | CVD Inserts (2) Pair of replacement inserts for the CVD shafts. | View product >>> |
#802354 | Pin steel 3x9.8mm (4) Set of 4 spare steel pins size 2x9.8mm. Suitable for use in the optional Serpent 710 CVD system (#802350). | View product >>> |
#802361 | Bodymount adjustable rear (2) Composite rear adjustable bodymount set complete with mounting screws and body clips. | View product >>> |
#802403 | 2-speed spring (2) Pair of gearbox tension springs for use in the Serpent gearbox. | View product >>> |
#802505 | Centax - 3 spring cup Aluminum spring cup for the Centax 3. | View product >>> |
#802507 | Centax - 3 centrifugal shoes (3) Set of 3 centrifugal shoes for the Centax 3. | View product >>> |
#803134 | Spacer anti roll bar RR (2) Spacer (2) for the rear anti roll bar. Comes complete with grub screws. | View product >>> |
#803135 | Anti-roll bar RR 2.5mm Rear anti-roll bar (2.5mm) for use with the Serpent 720 and 733. | View product >>> |
#803198 | Adjusting nut nylon for 8.5mm ball (10) Set of 10 nylon end play adjusting nuts for use with the cars 8.5mm pivot balls. | View product >>> |
#803208 | Centax-3 flywheel 31mm 31mm diameter Centax-3 flywheel. | View product >>> |
#803220 | 2-speed gearbox set wc (no shaft) Complete 2 speed WC gearbox set for use on the Serpent 710, 720 and 733. Includes everything required with the exception of the 2 speed shaft. Manual can be found in the menu: I-manual under S733. | View product >>> |
#803222 | Gear 2-Speed WC (2nd) 54T 54T 2nd gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803223 | Gear 2-Speed WC (2nd) 55T 55T 2nd gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803224 | Gear 2-Speed WC (2nd) 56T 56T 2nd gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803225 | Gear 2-Speed WC (1st) 59T 59T 1st gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803226 | Gear 2-Speed WC (1st) 60T 60T 1st gear for the 1/10th scale WC 2-Speed gearbox. Replacement part nr: 803225 | View product >>> |
#803227 | Gear 2-Speed WC (1st) 61T 61T 1st gear for the 1/10th scale WC 2-Speed gearbox. | View product >>> |
#803230 | Centax-III clutch set WC (no flywheel) Centax-III WC clutch set for use on a 1/10th scale Serpent chassis. Comes complete with bell housing, clutch shoe, 2 new WC pinions, clutch plate, flyweights, spring, bearings, spacers and everything needed to mount it in your car, except the flywheel. To be used only with WC 2 speed gears. | View product >>> |
#803231 | Centax-3 WC Clutch bell housing Centax-3 WC Steel Clutch bell housing. | View product >>> |
#803232 | Centax-3 WC Gear set alu (6) Set of 6 hard coated aluminium pinion gears for the Centax-3 WC clutch system. Set includes 1st gears - 16T, 17T & 18T and 2nd gears - 21T, 22T & 23T. | View product >>> |
#803233 | Pinion Centax-3 WC (1st) 16T Hard coated aluminium 16T 1st gear pinion for the Centax-3 WC clutch system. | View product >>> |
#803234 | Pinion Centax-3 WC (1st) 17T Hard coated aluminium 17T 1st gear pinion for the Centax-3 WC clutch system. | View product >>> |
#803236 | Pinion Centax-3 WC (2nd) 21T Hard coated aluminium 21T 2nd gear pinion for the Centax-3 WC clutch system. | View product >>> |
#803237 | Pinion Centax-3 WC (2nd) 22T Hard coated aluminium 22T 2nd gear pinion for the Centax-3 WC clutch system. | View product >>> |
#803240 | CV-axles set pro Set of 2 high performance CVD shaft assemblies in durable Serpent spring-steel quality for use on Serpents range of 1/10th 200mm. | View product >>> |
#803241 | CVD Drive shaft (2) A pair of spare high quality spring steel CVD drive shafts for the Serpent 710, 720, 733. | View product >>> |
#804100 | Belt Front 40S3M195 Kevlar re-inforced drive-belt 4mm wide, 195T. | View product >>> |
#804101 | Belt Side 40S3M378 Kevlar re-inforced drive-belt 4mm wide, 378T. | View product >>> |
#804103 | Belt Set 733 (3) Kevlar re-inforced drive-belt-set 5mm wide rear 186T belt, 4mm wide front 195T and 378T side belt. | View product >>> |
#804108 | Up-right 733 (2) Rear up-right in nylon for 733. Uses same left and right. | View product >>> |
#804109 | Wishbone rear lw L+R Medium wishbone rear lower MEDIUM, L+R the same. | View product >>> |
#804110 | wishbone front lw L+R Medium wishbone front lower MEDIUM, L+R . | View product >>> |
#804111 | Wishbone front up L+R Medium (2) wishbone front upper MEDIUM, L+R (same). | View product >>> |
#804112 | Pully 2speed shaft 20+21T (2) Reinforced nylon pullies, perfectly true running, low wear. Feature small holes in the sides to allow dirt/dust out. | View product >>> |
#804113 | Pully middle 18+21T (2) Reinforced nylon pullies, perfectly true running, low wear. Feature small holes in the sides to allow dirt/dust out. | View product >>> |
#804114 | 2-speed shaft 733 Balanced 2-speed gearbox shaft. Serpent spring steel. Calibrated holes for steel pins, chamfered flat spot. | View product >>> |
#804115 | Exhaust mount spring Spring steel exhaust mount spring, to fix the pipe-set safely to the radioplate. The spring will prevent the pipe to damage (at small impact only). | View product >>> |
#804116 | Pivot pin rr lw (2) Spring steel rear lower pivot pins, with chamfered flat spots. Packed by 2. | View product >>> |
#804117 | Pivot pin fr lw (2) Spring steel front lower pivot pins, with chamfered flat spots. Packed by 2. | View product >>> |
#804118 | Pivot pin fr up (2) Spring steel front upper pivot pins. Packed by 2. | View product >>> |
#804119 | Bumper 733 foam (2) Foam bumper standard version. High quality foam, absorbs impact in perfect way. Packed by 2. | View product >>> |
#804120 | Servo saver axle Servo saver axle. Precision machined axle for perfect bearing fit. Serpent spring steel. | View product >>> |
#804121 | Shaft middle Shaft middle steel. Precision machined with calibrated holes for the steel pins and axle for perfect bearing fit. Serpent spring steel. | View product >>> |
#804122 | Bearingblock rr up alu Bearingblock rear upper alu. Precision machined alu bearingblock, anodised in titanium color. | View product >>> |
#804123 | Belt tensioner alu Belt tensioner in aluminium. Precision machined, anodised in titanium color. | View product >>> |
#804124 | Servo saver spring Servo saver spring. | View product >>> |
#804125 | Engine mount top alu Precision machined aluminium engine mount. U-shaped. Fits most engine brands. | View product >>> |
#804126 | Engine mount lw rr alu Precision machined aluminium engine mount. Lower rear version. Anodised. Doubles up as chassis stiffner, to control flex. | View product >>> |
#804127 | Engine mount lw fr alu Precision machined aluminium engine mount. Lower front version. Anodised. Doubles up as chassis stiffner, to control flex. | View product >>> |
#804128 | Rearplate wide alu Rear suspension bracket wide version. Precision machined aluminium, engraved and anodised. | View product >>> |
#804130 | Servo saver nut alu Servo saver nut alu, to set the preload on the servo-saver spring. | View product >>> |
#804131 | Servo saver shaft alu Servo saver shaft alu, with alu threading. | View product >>> |
#804132 | Suspension bracket rr fr alu V0 Suspension bracket in CNC machined high grade alu. Anodised. Rear side, front one V0, which is the wide version. | View product >>> |
#804134 | Bracket middle shaft alu CNC machined alu middle shaft bracket, anodised. | View product >>> |
#804135 | Chassisplate 733 3mm CNC machined 3mm aerospace quality 7075 T6 aluminium. Closed design, to create stiff chassis. Chamfered edges, countersunk holes, recess for transponder mounting, cooling holes for the engine. | View product >>> |
#804136 | Battery holder carbon CNC machined high quality carbon fibre, lightweight bracket to attach the battery. | View product >>> |
#804137 | Radioplate 733 carbon CNC machined high quality carbon fibre, lightweight radioplate 2.5mm | View product >>> |
#804138 | Shocktower front 733 carbon CNC machined lighweight, high quality carbon fibre 3.2mm, front shocktower. Selection of shockmounting positions and place to mount 3rd body post. | View product >>> |
#804139 | Shocktower rear 733 carbon CNC machined lighweight, high quality carbon fibre 4mm, rear shocktower. Selection of shockmounting positions and place to push through the tank-opening-wire. | View product >>> |
#804140 | Camber link bracket 733 carbon CNC machined lighweight, high quality carbon fibre, rear camber link bracket. Selection of mounting positions also inner and outer. | View product >>> |
#804143 | Anti-rollbar FR 2.5mm Precision made spring-steel front anti-roll bar in 2.5mm | View product >>> |
#804145 | Exhaust spring holder alu CNC machined alu exhaust spring holder. | View product >>> |
#804146 | Shim conical 3x2mm (4) Shim conical 3x2mm (4), to used as roll-center spacer, on top of the up-right. Orange anodised. Works in 1/8 and 1/10 scale. | View product >>> |
#804147 | Diff pulley front 35T Diff pulley front 35T, for gear-diff and or spool/oneway shaft. | View product >>> |
#804148 | Diff pulley rear 40T Diff pulley rear 40T, for gear-diff. | View product >>> |
#804149 | Tank inserts (frame) Nylon , injection moulded inserts, that can be mounted inside the fueltanks with a screw, to reduce volume if needed, due to higher temperature or other. 3 sizes on one frame. | View product >>> |
#804150 | Rollbar 733 Nylon rollbar 733, which doubles as end-stop for the fuel-tank cap and also incorporates a guider for the tank-cap-opening wire. | View product >>> |
#804151 | Receiver box Nylon receiver box, to mount and protect your precious receiver. Sports S-logo on the side. | View product >>> |
#804152 | Eccenters rear frame Frame which includes the eccenters of the rear suspension. To change the pivot pin positons. | View product >>> |
#804153 | Eccenters front frame Frame which includes the eccenters of the front suspension. To change the pivot pin positons. | View product >>> |
#804154 | Servo levers steering (3) Frame with the 3 most commonly used levers for steering, 23T, 24T and 25T. Precison fit. | View product >>> |
#804155 | Servo levers throttle (3) Frame with the 3 most commonly used levers for throttle, 23T, 24T and 25T. Precison fit. | View product >>> |
#804156 | Brake-lever/battery spacers frame Frame with the nylon brake lever, and the spacers to correctly mount the battery bracket. | View product >>> |
#804157 | Servo-saver set nylon Nylon frame contains the parts of the servo-saver. | View product >>> |
#804158 | Servo-mounting spacers Nylon spacer to correctly mount the servo. | View product >>> |
#804159 | Steering-servo mount Steering-servo mount in nylon. | View product >>> |
#804160 | Bearing bracket upper front Front upper top-mounted bracket in nylon. | View product >>> |
#804161 | Suspension bracket front L+R Suspension bracket front L+R . | View product >>> |
#804162 | Radioplate support (2) Radioplate support in nylon, 2 pcs. | View product >>> |
#804163 | Chassis stiffner, side Nylon chassis stiffner, connects rear end to the radioplate. | View product >>> |
#804164 | Bodyplate front Nylon bodyplate front. | View product >>> |
#804165 | Bumperplate front Bumperplate front nylon. | View product >>> |
#804166 | Bearingblock FR L alu CNC machined, anodised, aluminium, front left bearingblock. | View product >>> |
#804167 | Bearingblock FR R alu CNC machined, anodised, aluminium, front right bearingblock. | View product >>> |
#804168 | Bearingblock RR alu CNC machined, anodised, aluminium, rear bearingblock. | View product >>> |
#804169 | Brake pulley adaptor alu Machined alu brake pulley adaptor with 3 steel pins. | View product >>> |
#804170 | Suspension bracket front alu CNC machined alu front suspension bracket, anodised. | View product >>> |
#804171 | Geardiff uni 733 Complete set to assemble the universal 733 geardiff. Fits front and/or rear. Supersmall, very light, strong case. 22 gram incl main gear. | View product >>> |
#804173 | Gear-diff revision-set Gear-diff revision-set. | View product >>> |
#804174 | Gear-diff housing Precision moulded nylon gear-diff case. | View product >>> |
#804175 | Suspension-set nylon Medium (10) Suspension-set nylon MEDIUM, includes 10 pcs of the main suspension parts for a rebuild. | View product >>> |
#804176 | Geardiff X-ring (4) X-shaped gear-diff seal in top quality silicone rubber. 4 pieces. | View product >>> |
#804178 | Tank-support alu / rubber (3) 3 pieces of alu tank supports and silicone rubber covers. | View product >>> |
#804179 | Tank-mounts rubber (3) Tank-mounts rubber (3) | View product >>> |
#804180 | Brake / throttle wire (2) Threaded wire with end-stop to use for throttle and brake linkages. | View product >>> |
#804181 | Throttle spring (2) Small throttle spring (2) | View product >>> |
#804182 | Decal sheet 733 (2) High quality, thin foil-type decal-sheets with 733 logo's, to apply to bodyshells. | View product >>> |
#804183 | Manual - ref guide 733 full color Full color manual and reference guide for 733. | View product >>> |
#804186 | Screw-set 733 (196) Complete set of screws for 733, top quality allen type steel screws. | View product >>> |
#804187 | Oil-set 733 (3) Silicone oil-set of 733 kit. Includes shockoil 1000 Cst and 2 types diff oil, 80k and 50k. | View product >>> |
#804188 | Driveshaft adaptors geardiff Pro (2) Spring steel, lightened drive shaft adaptors for gear-diff 733. 2 pieces. | View product >>> |
#804200 | Diffcase O-ring EP (10) Diffcase O-ring 22,5x1 (10) | View product >>> |
#804202 | Belt rear 50S3M186 Kevlar re-inforced drive-belt 5mm wide, 186T. | View product >>> |
#804217 | Bearingblock-2sp-r 733 / 966 V2 Bearingblock-2sp-r 733 / 966 V2 With this bearingblock you can connect them to the rear bearingblocks to make the car stiffer. | View product >>> |
#804218 | Bearingblock-2sp-l 733 / 966 V2 Bearingblock-2sp-l 733 / 966 V2 With this bearingblock you can connect them to the rear bearingblocks to make the car stiffer. | View product >>> |
#804219 | Bearingblock rear upper 733 V2 Bearingblock rear upper 733 V2. With these bearingblocks you can connect them to the 2-speed bearingblocks to make the rear end stiff. | View product >>> |
#804220 | Bushings bearingblock l+r 733 / 966 V2 (2) Bushings bearingblock l+r 733 / 966 V2 (2) | View product >>> |
#804221 | Bushing rear anti-roll bar L+R 733/966 V2 (2) Bushing rear anti-roll bar L+R 733/966 V2 (2) | View product >>> |
#804227 | Enginemount mono 733 Enginemount mono 733 (one piece enginemount). Beautifully designed and machined mono-engine block for Serpent 733 in top quality aluminum. Grey anodized finish.Very strong and durable, creates a stiffer chassis in that area, so reduction of flex. Fits all main brands of engines. Direct replacement of multi-part kit-version | View product >>> |
#804231 | Dls shaft (2) Dls shaft (2) | View product >>> |
#804232 | Shim 3x6x3 (4) Shim 3x6x3 (4) Repalced by 110417 Shim 3X6X3 (10) | View product >>> |
#808214 | Spacer-set caster (3) Set of 2 nylon frames with 1-2-4mm caster shims. The shims can be placed in front or behind the upper suspension arm, therewith changing the caster angle of the front suspension. | View product >>> |
#901255 | Belt tensioner Alu. belt tensioner S950, S835, S705, VETEQ. | View product >>> |
#902138 | Trackrod M3x23 (2) Trackrod M3x23 (2) | View product >>> |
#902411 | Drive-flange alu with owb Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
#902412 | Adaptor 2-speed LC Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing. | View product >>> |
#902413 | Carrier 2nd Gear LC Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox. | View product >>> |
#902416 | 2-speed shoe-set LC II A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only. | View product >>> |
#902420 | Roller pin steel 5X5 (2) A pair of steel roller pins for use in the LC gearbox. Replaced by 110202 Pin 5x5 (10) | View product >>> |
#902421 | Needle 3x13.8 (4) Set of 4 Roll pins for use with the new LC Gearbox 2 speed adapter. Replaced by 110203 Pin 3x14 (10) | View product >>> |
#903166 | Shock rod short (2) A set of 2 short shock rods for use in RCC shocks. | View product >>> |
#903168 | Nylon parts frame shocks RCC Complete set (4) of composite RCC shock absorber components. | View product >>> |
#903171 | O-ring 10x1 (4) Set of 4 o-rings for use in the RCC shock absorbers. | View product >>> |
#903175 | Foam insert (4) Set of 4 foam inserts for use in the RCC shock absorbers. | View product >>> |
#903177 | Nut shock alu (2) Set of 2 anodised aluminium shock absorber nuts. Suitable for the RCC shock absorbers. | View product >>> |
#903178 | Body alu shock FR (2) A pair of front aluminium RCC shock bodies. | View product >>> |
#903186 | C + G Clip + washer RCC shocks (12) Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks. | View product >>> |
#903231 | Ball joints set 14+6+2 Set of composite ball joints that includes 14 x 6mm ball joints, 6 x shorter shock end ball joints and 2 x 4mm ball joints. The balljoints feature a text with TOP to indicate right position to press in the ball, for perfect fit. | View product >>> |
#903318 | Brake cam alu 966 Hard-coated aluminium brake-came. | View product >>> |
#903319 | Brake bushing (2) Brake bushing in spring steel, 2 pieces. | View product >>> |
#903330 | Brakeplate and pad set Brakeplate and pad set | View product >>> |
#903333 | X-ring RCC 2009 Shock (10) X-Ring for the 2009 RCC Shock | View product >>> |
#903334 | Shock-set RCC-X short (2) Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
#903336 | 903336 Insert RCC 2009 shock (2) Shock bottom for the X-Ring for the 2009 RCC shock | View product >>> |
#903341 | Antirollbar ball 3mm (2) Antirollbar ball 3mm (2) | View product >>> |
#903347 | Balljoint shock RCC (4) Precision moulded lower short ball-joints of the RCC shocks. Packed by 4. | View product >>> |
#909405 | Shock adjusting nut alu. + O-rings (4) Set of 4 alu. spring-tension adjusting nuts and 4 O-rings to be inserted into the alu. adjusting nuts. O-ring prevents adjusting nut from coming loose. | View product >>> |
#909516 | Centax II Spacer Thrustbearing Sapcer for use with Centax-II clutch system. Comes complete with screw. | View product >>> |
#909519 | Centax II shims 5 x 10 x 0.3 (2) + 0.5 (1) Set of 3 Centax-II shims in two sizes 0.3 (2) and 0.5 (1). | View product >>> |
#909520 | Centax II / III spring 1.8 (10mm) Optional 10mm Centax II spring. | View product >>> |
#9638 | Spacer aluminium for 2-speed shaft To use on 2-speed shaft on Impulse, Impact 2WD. | View product >>> |