> Serpent 747 1/10 scale 200mm (#804005)
- Brand:
- Serpent
Product Type:- Gas Cars > 1/10 200mm
Serpent 747 1/10 scale 4wd gaspowered racing car. Key specs: 4wd beltdriven, 2-speed SL6 gearbox, True Motion Centax clutch, RCM shocks, flex-control front and rear, new geometry front and rear, 3mm chassis with weight sliders, topquality alu parts, spring steel transmission parts, low and light brake. Light, wide sweetspot, easy, fast. Mazzeo, 2013 EFRA European Champion !! Thurston, 2013 Junior EFRA European Champion !!
View: Text | Images
> Optional parts
| #160109 | Shock RCM bushing machined (8) Shock RCM bushing machined (8) Can be used instead of the moulded bushings (#160108) , for more precise shockaction. | View product >>> |
| #160114 | Shockset RCM on-road plastic short (2) Shockset RCM on-road plastic short (2) | View product >>> |
| #160115 | Shock RCM shaft short tin coated (2) Shock RCM shaft short tin coated (2) | View product >>> |
| #160117 | Shock piston RCM machined 1-hole (4) Shock piston RCM machined 1-hole (4) | View product >>> |
| #160118 | Shock piston RCM machined 2-hole (4) Shock piston RCM machined 2-hole (4) | View product >>> |
| #160119 | Shock piston RCM machined 3-hole (4) Shock piston RCM machined 3-hole (4) | View product >>> |
| #160120 | Shock piston RCM machined 4-hole (4) Shock piston RCM machined 4-hole (4) | View product >>> |
| #160124 | Shock set RCM-SS (2) Shock set RCM-SS (2) | View product >>> |
| #160133 | Shock shaft Tin coated RCM-SS (2) Shock shaft Tin coated RCM-SS (2) | View product >>> |
| #1888 | Decal sheet 1/10 chrome (2) High quality decal-sheet size 30x20cm. Chrome. Serpent logo's. To apply to 1/10 scale bodies. | View product >>> |
| #190546 | Serpent high speed fuel gun Serpent high speed fuel gun | View product >>> |
| #401155 | Track rod 16mm alu (2) Pair of 16mm orange anodised aluminium track rods. | View product >>> |
| #401433 | Weight set brass 5gr - 12gr - 20gr (2+1+1) Weight set brass 5gr - 12gr - 20gr (2+1+1) Set of weight set in brass material 5gr - 12gr - 20gr (2+1+1)Use to fine-tune the weight balance with all electronics mounted as well. The 20g and 12g are made to mount near the center line of the car, close to the belt. Made for the Serpent 411 , and the holes in the chassis to mount them are already available. | View product >>> |
| #401500 | Pivotball uni 4.5mm alu (4) Pivotball uni 4.5mm alu (4) | View product >>> |
| #802212 | Body posts adjustable front alu (2+1) Set of 3 aluminium body posts for use on front of Serpent 1/10 cars. Comes with required fastener. | View product >>> |
| #802255 | Wheel hexagon alu orange (4) Set of 4 orange anodised aluminium hex wheel adaptors for use on Serpent 200mm chassis'. Includes hex head screw for mounting. | View product >>> |
| #802261 | Trackrod M3x47mm Titanium (2) Trackrod M3x47mm (2) Titanium | View product >>> |
| #802362 | Body posts adjustable rear alu (2) Set of 2 aluminium body posts for Serpent 1/10. Comes with fasteners. | View product >>> |
| #802508 | Centax - 3 clutch shoe XP XP clutch shoe for use with the Centax 3. | View product >>> |
| #802509 | Centax-3 clutch shoe yellow New material clutch shoe for use with the Centax-3 clutch system. Increased friction coefficient to handle high-power engines. | View product >>> |
| #804104 | Belt Front 40S3M195 Low Friction Low friction type Kevlar re-inforced drive-belt 4mm wide, 195T. (804104/803246) | View product >>> |
| #804105 | Belt side 40S3M378 Low Friction Low friction type Kevlar re-inforced drive-belt 4mm wide, 378T. | View product >>> |
| #804107 | Belt set 733 Low Friction (3) Low friction type Kevlar re-inforced drive-belts, set of 3. 5mm wide 186T rear belt, 4mm wide 195T front belt and 378T side belt. | View product >>> |
| #804119 | Bumper 733 foam (2) Foam bumper standard version. High quality foam, absorbs impact in perfect way. Packed by 2. | View product >>> |
| #804128 | Rearplate wide alu Rear suspension bracket wide version. Precision machined aluminium, engraved and anodised. | View product >>> |
| #804132 | Suspension bracket rr fr alu V0 Suspension bracket in CNC machined high grade alu. Anodised. Rear side, front one V0, which is the wide version. | View product >>> |
| #804184 | Front alu shaft with one-way bearings Precision machined front alu shaft with high quality one-way bearings for Serpent 733. Can be easy locked with pins as needed. Supplied with springsteel one-way adaptors, o-rings, pins and steel screws. | View product >>> |
| #804194 | Wheel hexagon +1mm (4) Wheel hexagon +1mm (4) to create more offset. Replacement part nr: 500689 | View product >>> |
| #804195 | Wheel hexagon -1mm (4) Wheel hexagon -1mm (4) to create less offset. | View product >>> |
| #804196 | Pulley 18T mid alu Precision machined and hard anodised alu pulley 18T mid. | View product >>> |
| #804197 | Pulley 21T mid side alu Precision machined and hard anodised alu pulley 21T mid side. | View product >>> |
| #804198 | Pulley 20T 2-sp center alu For Serpent 733. Precision machined hard anodized alu brake pulley adaptor with integrated 20T pulley. Light-weight, very low wear and due to anodizing, less dirt and dust will stick to the surface. Direct replacement for standard alu adaptor and nylon 20T gear 804169 and 804112. | View product >>> |
| #804199 | Pulley 21T 2-sp side alu Precision machined and hard anodised alu pulley 21T 2-speed - side. | View product >>> |
| #804203 | Belt rear 50S3M186 Low Friction Low friction type 5mm Kevlar re-inforced drive-belt, set 186T. | View product >>> |
| #804204 | Flange alu for axle front solid / hardware Flange alu for axle front solid / hardware. Available: end october 2009 | View product >>> |
| #804205 | Cvd Wheelaxle pro (2) Cvd Wheelaxle pro (2) Spring steel, lightweight, durable, precision machined and polished. | View product >>> |
| #804207 | Wishbone front lw L+R Hard Optional composite nylon wishbone front lower, L+R, Hard type. | View product >>> |
| #804213 | Servo saver top + bottom alu (2) Servo saver top + bottom alu (2) Precision machined aluminum servo-saver top and bottom part for Serpent 733. Very smooth servo saver action, less flex, very light and strong, precision fit of Ackermann inserts. Grey anodized finish. Direct replacement of nylon version. | View product >>> |
| #804214 | Steering lever 23T alu Steering lever 23T alu | View product >>> |
| #804215 | Steering lever 24T alu Steering lever 24T alu | View product >>> |
| #804216 | Steering lever 25T alu Steering lever 25T alu | View product >>> |
| #804228 | Connectorset rear 733 (2+2) Connectorset rear 733 (2+2) Set of 2 rubber and 2 alu connectors with screws as needed. Use together with 804222 | View product >>> |
| #804232 | Shim 3x6x3 (4) Shim 3x6x3 (4) Repalced by 110417 Shim 3X6X3 (10) | View product >>> |
| #804234 | Centax-3 clutchbell alu coated Centax-3 clutchbell alu nickel coated | View product >>> |
| #804251 | Pivotball 5.8mm double straight alu coated (4) Pivotball 5.8mm double straight alu coated (4) | View product >>> |
| #804252 | Pivotball 5.8mm alu coated (4) Pivotball 5.8mm alu coated (4) with hexagon. | View product >>> |
| #804253 | Pivotball 5.8mm alu coated long (4) Pivotball 5.8mm alu coated long (4) | View product >>> |
| #804254 | Anti-roll bar ball 3.0mm alu (2) Anti-roll bar ball 3.0mm alu (2) | View product >>> |
| #804271 | Radioplate support alu 747 Radioplate support alu 747. CNC machined radioplate support for the Serpent 747, made from 7075 T6 aluminium and grey anodized. This support will increase chassis stiffeness in the central section of the car. The 2 mounting lugs on the left side in this image, allow the use of a carbon side stiffener (#804272), required in case you want to test less flex. | View product >>> |
| #804272 | Sideplate carbon 747 R Sideplate carbon 747 R CNC machined Side stiffener for the Serpent 747, made from high quality carbon fibre, with countersunk holes. This part in combination with the 804271 aluminium radioplate support will increase chassis stiffness in the central section of the car. | View product >>> |
| #804273 | Chassis weight 25gr 747 Chassis weight 25gr 747 | View product >>> |
| #804277 | Shock bracket carbon L+R RR CNC machined Shock-mount extensions for the Serpent 747, made from high quality carbon fibre, with countersunk holes, and the correct fasteners. Enables to mount the shocks more to the outside, making the shock more “harder”, progressive, increasing rear end grip, especially when using a softer rear spring. | View product >>> |
| #804278 | Anti-rollbar bracket carbon RR (2) CNC machined anti-rollbar mount extensions for the Serpent 747, made from high quality carbon fibre. Enables to mount the ant-roll bar more to the outside, making the anti-roll bar “ harder” and more progressive | View product >>> |
| #804291 | Brake lever on-road alu Brake lever on-road alu for Serpent 1/10 and 1/8. | View product >>> |
| #804293 | Body support washers med + high (5+5) Body support washers med + high (5+5) | View product >>> |
| #804294 | Wishbone 747 RR LW hard (2) Wishbone 747 RR LW hard (2) | View product >>> |
| #804295 | Bumperplate carbon 747 CNC machined upper bumper for Serpent 747, made from high quality carbon fibre. Comes complete with alu posts and fasteners. Improved looks and light too. Direct replacement of current nylon one. Can also be fitted to Serpent 733, in combination with the lower 747 bumper. | View product >>> |
| #804296 | Body support rear (2) Body support extra rear (2) | View product >>> |
| #804298 | Decal sheet 747 chrome (2) Decal sheet 747 chrome (2) | View product >>> |
| #804300 | Chassis 747 hard coated Chassis 747 hard coated ( fits also 733) | View product >>> |
| #804301 | Geardiff rear pully alu 40T Geardiff rear pully alu 40T anodised, with pressed on sides with holes to make lighter and allow dirt to move out easy. | View product >>> |
| #804302 | Weight set round 4 x 5gram Brass weight set round 4 x 5gram with hardware. Precision weights, black anodised, with weight engraved. Made for 747 but can be used in any car. | View product >>> |
| #804304 | Geardiff pully front alu 35T Geardiff rear pully in anodised alu 35T, with pressed on sides with holes to make lighter and allow dirt and dust to move out. Stunning looks. | View product >>> |
| #804305 | Shocktower 747 carbon FR low Shocktower 747 carbon FR low | View product >>> |
| #804306 | Shocktower 747 carbon RR low Shocktower 747 carbon RR low | View product >>> |
| #804308 | Conversion set 747 to 747E A complete set to convert your 747 to a 747E car. | View product >>> |
| #804318 | Servomount set 747E Servomount set 747E | View product >>> |
| #804319 | Screwset 747 gray alu (125) Screwset 747 gray alu (125) The superbly machined 7075 T6 screws have a perfect fit are very strong and come gray anodized . Great looks and a great weight saver. | View product >>> |
| #804320 | Steeringblock 748 (2) Steeringblock 748 (2) | View product >>> |
| #804347 | Geardiff outdrive 748 (2) Geardiff outdrive 748 (2) | View product >>> |
| #804351 | Geardiff housing 748 FR Geardiff housing 748 FR | View product >>> |
| #804352 | Geardiff housing 748 RR Geardiff housing 748 RR | View product >>> |
| #804357 | Geardiff front 748 Geardiff front 748 | View product >>> |
| #804358 | Geardiff rear 748 Geardiff rear 748 | View product >>> |
| #804367 | 2-speed set SL6 XLI 2-speed set SL6 XLI | View product >>> |
| #804368 | 2-speed adaptor SL6 XLI 2-speed adaptor SL6 XLI | View product >>> |
| #804369 | 2-speed shoe (2) SL6 XLI 2-speed shoe (2) SL6 XLI | View product >>> |
| #804370 | 2-speed housing SL6 XLI 2-speed housing SL6 XLI | View product >>> |
| #804371 | 2-speed spring (2) SL6 XLI 2-speed spring (2) SL6 XLI | View product >>> |
| #804374 | Solid axle set front alu Solid axle set front alu For 748-WC use pulley 804396 or 97 | View product >>> |
| #804375 | Solid axle front alu Solid axle front alu | View product >>> |
| #804376 | Solid axle outdrive (2) Solid axle outdrive (2) | View product >>> |
| #804378 | 2-speed drive flange SL6 XLI 2-speed drive flange SL6 XLI | View product >>> |
| #804390 | Diff set fr 748 V2 Diff set fr 748 V2 | View product >>> |
| #804399 | Exhaust wire 1/10 and 1/8 (2) Exhaust wire 1/10 and 1/8 (2) | View product >>> |
| #804407 | Camberlink riser 1/10 (2) Camberlink riser 1/10 (2) | View product >>> |
| #804439 | Centax clutchbell 1/10 alu nickel coated V2 Centax clutchbell 1/10 alu nickel coated V2 | View product >>> |
| #804527 | Excenter set rr alu (2) S7XX Excenter set rr alu (2) S7XX | View product >>> |
| #903226 | Shock rod RCC short Ti-Ni (2) Pair of short Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903232 | Spring Support alu light (4) Set of 4 lightweight aluminium spring supports for Serpent shock absorbers. | View product >>> |
| #903334 | Shock-set RCC-X short (2) Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
News