The Serpent 835 follows in the prestigious footsteps of the World and National Champion Serpent Impact M2 Challenger. Incorporating many of the new features the Serpent Race Team developed, the 835 will continue to be the choice of champions in the 1/10 scale 235mm class for years to come.
#1015 | Torx engine mount screws/washers Engine mounting screws for Impact and Vector. TORX head allows for higher torque to be applied to the screws, adding extra reliability. TORX-wrench 1014 required. Size M5x12. Countersunk alu. washers included. | View product >>> |
#1017 | Screws engine mount + flange (4) Special steel engine mounting screws, allen type. Integrated washer for easy assembly. | View product >>> |
#1094 | Shim-set 3x6x0.1mm (10) Special shims used to minimize play of front and rear wishbones of all cars using 3mm hinge-pins. Set includes 10 shims of 0.1mm. | View product >>> |
#1378 | Balls ceramic coated (12) Ultra hard coated 3.9mm diameter ceramic balls for use in the ball differential of the Serpent 710. Comes in a pack of 12. | View product >>> |
#1462 | Centax Nut & Pressure Nipple Tool Handy composite tool for adjusting the Centax clutch nut and for the mounting the fuel line nipples. | View product >>> |
#160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
#160330 | Spring set L27 (5) Set of 5 pairs of 27mm long shock absorber springs. The set includes red, purple, green, pink and blue springs. | View product >>> |
#1666 | Transponder holder carbon S960 Carbon transponder holder made for the Serpent 960. Comes with all the necessary fasteners. This transponder holder must be used the Steering servo mount V2 (#903197) | View product >>> |
#6123A | Body posts aluminium short (2) ( use 903502) Aluminium body posts for Serpent chassis'. Comes in a pack of 2 with the mounting screws and a pair of body clips. Replaced by 903502. | View product >>> |
#6586 | Centax coilspring Coil-spring for Centax clutch system, diam. 1.7mm. This spring is mainly used for clutches on 2.1cc/.12 and 2.5cc/.15 size engines. The spring can be used in all versions of the Centax clutch. A harder Centax clutch spring is also available (#909520). | View product >>> |
#6587 | Centax clutch shoe black Graphite Centax clutch shoe, provides softer engaging of the clutch than the yellow type (6587N). Mainly used in 1/10 scale racing. | View product >>> |
#6587N | Centax clutch shoe brown Standard clutch shoe for Centax, colour yellow/brown. Used mainly in 1/8 scale racing. For 1/10 scale optional 6587 clutch shoe available. | View product >>> |
#6588C | Centax fly-weight carbon (3) + spring Pro style Carbon fly-weights | View product >>> |
#6598 | Centax spring for fly-weights (3) Replacement parts for Centax clutch system. | View product >>> |
#801157 | Tank-bracket rear Carbon Carbon fuel tank bracket to attach rear of fuel tank to the radio plate. Comes with rubber grommit. | View product >>> |
#801159 | Spacer Fuel-tank Capacity (5) Set of 5 spacers and two screws to allow you to adjust the capacity of your fuel tank. | View product >>> |
#801173 | Battery-set 5-cell 730mA S-705-835 Complete pre made battery pack - Comes complete with plug - The pack contains 5 730Mah AAA batteries - Suitable for the Serpent 705 and 835 | View product >>> |
#801176 | Receiver holder carbon Carbon fibre receiver mount for Serpent 705. Comes complete with fastening materials and rubber grommets. | View product >>> |
#801219 | Pivotball 8.5mm short (4) Set of four short aluminum 8.5mm pivot balls for use on the Serpent 705. | View product >>> |
#801256 | Timingbelt 201X5mm rear Pro Pro timing belt for the Serpent 710. Soft belts are optimised for smooth running. Rear belt 201x5mm. Also fits Serpent Impulse and Serpent 705 cars. | View product >>> |
#801345 | Brake disk steel ventilated Ventilated, steel brake disk for S705, SERPENT 710, S835, Impact, S705, Impulse cars. | View product >>> |
#808231 | Q-c levers front alu. (2) Alu. quick-change levers for the front wheel axles. Interchangeable with standard parts 808230. | View product >>> |
#808251 | Middle bearing block 4-WD aluminium Optional middle bearing block for all Serpent cars (less Veteq). Interchangeable with standard composite middle bearing block. | View product >>> |
#808253 | Middle shaft light Lightweight middle shaft to be used on Impulse, Impact, 705, 835, vector series and Serpent 950. | View product >>> |
#808266 | Pulley-adaptor alu light (2) Set of 2 lightweight pulley adaptors for use with the 1/10th scale range of cars. Comes with mounting grubscrews. | View product >>> |
#808327 | Revision pins driveshafts 4-WD (8) Set of 8 replacement pins to overhaul worn-out pins of front and rear drive shafts (808220 + 808325) of Impact 2 and M2 all Specs. | View product >>> |
#808328 | Revision pins driveshafts 2-WD (4) Set of 4 replacement pins to overhaul worn-out pins of rear drive shafts 808325 of Impact 2 and M2 all Specs. Requires special HUDY tool 106000. | View product >>> |
#808331 | Wheelflanges alu. F+R (2+2) Set of 2 front and 2 rear wheel flanges of fixed wheel adapters. | View product >>> |
#808339 | Anti-roll bar rear 2.0mm 2.0mm anti-roll bar for use with all current Serpent cars including the Impact and Vector series of cars. Comes with anti-roll bar connecting pushrods and fasteners. | View product >>> |
#808361 | Drive-belt front 5mm 1mm wider than the original belt, it wears less, it increases reliability and ensures a smooth drive train. This 5mm wide belt is made Kevlar reinforced and is suitable for the S835, Impact M2 4WD and Serpent 705 and Impulse 4WD. | View product >>> |
#808377 | Pro-diff pulley 47t Diff. pully 47T, fits PRO-diff (909390) and FPS-diff. (808390). Impact-M2 models only (rear transmission ratio 47T/22T). | View product >>> |
#808381 | Engine blocks ZX15 small block Pair of orange anodised aluminium engine mounting blocks, to be used to mount the new small block ZX15 engine in the Serpent 835/Impact. | View product >>> |
#808390 | FPS-differential The new FPS differential features the unique 'Friction Plates Spur' system, allowing fine adjustment of the limited slip (spur) and yet maintaining smooth differential action. The FPS differential fits all Impact M2 models. | View product >>> |
#808391 | FPS-diff. axle long Light-weight but yet durable diff. axle with double drive slots. When one wears out, the second slot can be used before having to replace the axle. | View product >>> |
#808392 | FPS-diff. axle short Light-weight but yet durable diff. axle with double drive slots. When one wears out, the second slot can be used before having to replace the axle. | View product >>> |
#808393 | FPS-diff. adjusting nut Alu. adjusting nut to pre-load the friction plate set. | View product >>> |
#808394 | FPS-diff. friction plate set Set consists of 2 graphite filled friction plates, one stainless steel center plate and 1 stainless steel side plate. Support O-ring included. | View product >>> |
#808395 | FPS-diff. graphite filled PTFE friction plates (2) Set of 2 graphite filled PTFE friction discs for FPS differential. | View product >>> |
#808396 | FPS-diff. pulley 47T Set includes differential pully 47T and 3 hardened pins which need to be pressed into the side of the pully. Diff. pully is universal for both FPS-diff. and PRO-diff (909390). | View product >>> |
#808397 | Diff FPS hardware | View product >>> |
#808851 | Tyre savers 1/10 (10) Extend your tire life! Side wall protection rings, fit Impact M2 rear wheels. Are glued onto the side-walls of the rear tire and to the rim. Provide extra protection of the side-wall of the tire during contact with barriers. | View product >>> |
#901185 | Screw set alu M4X10 (25) Light weight, coated aluminium screws (aircraft quality) to replace the standard screws that come in the kit. Sells in bags containing 25 pcs. | View product >>> |
#901414 | Shock springs (white) Shock absorber springs VETEQ, medium-soft, white colored. Set of 2 front and 2 rear springs. Rear springs are longer than Vector. | View product >>> |
#901415 | Shock springs (yellow) Shock absorber springs VETEQ, medium, yellow colored. Set of 2 front and 2 rear springs. Rear springs are longer than Vector. | View product >>> |
#901416 | Shock springs (red) Shock absorber springs VETEQ, medium-hard, red colored. Set of 2 front and 2 rear springs. Rear springs are longer than Vector. | View product >>> |
#901417 | Shock springs (blue) Shock absorber springs VETEQ, hard, blue colored. Set of 2 front and 2 rear springs. Rear springs are longer than Vector. | View product >>> |
#902309 | Pivot Ball 9mm alu (PTFE (2) Set of 2 aluminium PTFE coated pivot balls. | View product >>> |
#902310 | Mounting-tool pivotball Tool for mounting the rear upper wishbone pivot ball. Comes supplied with screw to aid mounting. Can be used for all Serpent cars. | View product >>> |
#903199 | Centax flyweights PTFE machined for .21 Complete set of 3 flyweights for use in the Centax clutch system for .21 engines. | View product >>> |
#903239 | Centax-2 clutch shoe red Red clutch shoe for Centax-II. | View product >>> |
#909218 | Anti-rollbar levers alu front Special CNC machined alu. levers to hold the adjustable front anti-roll bar. Set includes 2 alu. parts and the eccentric adjustment bushing and hardware. Interchangeable with standard composite levers 909215. | View product >>> |
#909330 | Rear anti-roll bar set 3mm Non-adjustable rear anti-roll bar set. Includes hardware. Optional adjustable rear anti-roll bar set 909335 available. | View product >>> |
#909335 | Rear anti-roll bar set adjustable Adjustable rear anti-roll bar set with 2 adjustable blades. Turning the blades changes the stiffness of the rear anti-roll bar. Suitable for all current Serpent cars as well as the Impact and Vector series of cars. | View product >>> |
#909336 | Rear anti-roll bar blade (conical) Replacement blade for adjustable rear anti-roll bar. | View product >>> |
#909410 | Shock-body alu. Teflon front (2) Optional rear shock absorber cilinders, made of hard anodized and PTFE-coated aluminium. Interchangeable with standard composite front shock. body of shock set 909400 and 909440. Used when track temperatures rise above 30 degrees. | View product >>> |
#909411 | Shock-body alu. Teflon rear (2) Optional rear shock absorber cilinders, made of hard anodized and PTFE-coated aluminium. Interchangeable with standard composite rear shock. body of shock set 909400. Used when track temperatures rise above 30 degrees. | View product >>> |
#909414 | Spring-set d=1.5 l=27-22.7 orange (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Soft spring-tension. Color: Orange | View product >>> |
#909415 | Spring-set d=1.5 l=27-22.7 white (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium-soft spring-tension. Color: White | View product >>> |
#909416 | Spring-set d=1.6 l=27-22.7 yellow (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium spring-tension. Color: Yellow | View product >>> |
#909417 | Spring-set d=1.7 l=27-22.7 red (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium-hard spring-tension. Color: Red | View product >>> |
#909418 | Spring-set d=1.8 l=27-22.7 blue (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Hard spring-tension. Color: Blue | View product >>> |
#909419 | Spring-set D=1.9 L=27-22.7 purple (4) A full set of 4 Purple springs. The hardest in the Serpent range. | View product >>> |
#909420 | Spring-Set D=2.0 L=27-22.7 grey (4) Set of 4 ultra hard, powder caoted, grey springs. | View product >>> |
#909421 | Pre-tension springcup aluminium 1/10 (2) Aluminium pre-tension spring cups for use with your Impulse and Impact M2. | View product >>> |
#909423 | Pre-tension springs (3 sets) Set containing 3 pairs of springs each with a different tension, for use with the pretension alu cups. The support springs are used on the rear shock-absorbers only. The springs are NOT suitable for the push-rod suspension (as Veteq). | View product >>> |
#909446 | Shock membrame soft & Foam inserts (4) Set of 4 soft shock membranes and 4 foam inserts for use with Serpents 4 step shock absorbers. | View product >>> |
#909513 | Centax II Clutch Housing Light Ultra lightweight Centax-II Clutch bell. Made from coated high tensile steel. | View product >>> |
#909590 | Gear-pinion wrench Special tool to mount pinions on Centax clutch housing. Fits 15-16-17-18-19-20T pinions. Made of durable composite nylon. | View product >>> |
#909593 | Centax-II clutch-housing tool New tool for use with the Centax-II bell housing. Made from spring steel and comes with pin to aid the application of the pinion gears. | View product >>> |
#909597 | Centax endplay tool Anodised aluminium Centax endplay tool. Also can be used to hold the flywheel from rotating when tightening the flywheel nut. Check www.Xceedrc.com | View product >>> |
#9607 | Race brakepad-set L + R (type A) Complete set of steel brake-plates with a special type of pre-mounted brake-liner. Fits all Serpent cars. After rigorous testing we found this brake liner compound maintains a very high coefficient of friction under all sorts of conditions. It needs limited time to heat up and then stays very stable. You never need to glue brake pads again!. The liners are mounted onto the plates in an industrial oven and then ground to the correct thickness. | View product >>> |