> Serpent 960 1/8 scale 4WD (#903000) - DISCONTINUED
- Brand:
- Serpent
Product Type:- Gas Cars > 1/8
Continuing a long line of successful 1/8th scale cars, the Serpent 960 sets new standards in quality, ease of assembly, ease of use and outright performance. We believe this is the best car we have ever made. A first title in its debut race, the German Nationals, confirms this.
Related products
View: Text | Images
> Spare parts
| #1065 | O-rings alu front axle (10) | View product >>> |
| #1070 | Grommet rubber soft (4) High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes. | View product >>> |
| #1093 | Centax 5x8 shim-set 0.1 (2) 0.3 (1) Special shims to adjust end-play on the Centax clutch housing. Shims are used on the outside of the thrust-bearing bushing. Set includes 2 shims of 0.1mm and 1 shim of 0.3mm. | View product >>> |
| #1296 | Washer black nylon M3x7x0.5 (4) Set of 4 black nylon washers. Size M3x7x0.5 | View product >>> |
| #1435 | Tank cap AFL + o-ring set Replacement AFL fuel tank lid for all Serpent fuel tanks. Features orange rubber o-ring and all necessary parts. | View product >>> |
| #1436 | O-ring / washer for fuel cap (4) Replacement set of 4 o-rings with spring washer for AFL fuel tank lid (#1435). | View product >>> |
| #1595 | Exhaust wire mount Aluminum exhaust wire mount for Serpent 950. Comes with grubscrew. | View product >>> |
| #1601 | Body clips (10) Set of 10 galvanised steel body-clips. | View product >>> |
| #160122 | Shock balljoint short on-road (2) Shock balljoint short on-road (2) | View product >>> |
| #1602 | Tank-clips small (10) Packet of 10 small body clips for mounting the fuel tank. Can also be used as body-clips for smaller rc cars. | View product >>> |
| #160308 | Spring grey L23 (9/51.5) (2) Pair of 23mm long grey springs (9/51.5). | View product >>> |
| #160309 | Spring black L23 (10/57) (2) Pair of 23mm long black springs (10/57). | View product >>> |
| #160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
| #160323 | Spring red L27 (4.1/23.5) (2) Pair of 27mm long red springs (4.1/23.5). | View product >>> |
| #160324 | Spring pink L27 (4.9/28) (2) Pair of 27mm long pink springs (4.9/28). | View product >>> |
| #160325 | Spring blue L27 (5.8/33) (2) Pair of 27mm long blue springs (5.8/33). | View product >>> |
| #160326 | Spring purple L27 (6.8/39) (2) Pair of 27mm long purple springs (6.8/39). | View product >>> |
| #160327 | Spring green L27 (8/45.5) (2) Pair of 27mm long green springs (8/45.5). | View product >>> |
| #160328 | Spring grey L27 (8/45.5) (2) Pair of 27mm long grey springs (8/45.5). | View product >>> |
| #160329 | Spring black L27 (10/57) (2) Pair of 27mm long black springs (10/57). | View product >>> |
| #160330 | Spring set L27 (5) Set of 5 pairs of 27mm long shock absorber springs. The set includes red, purple, green, pink and blue springs. | View product >>> |
| #1615 | Ball-joints 4mm (4) | View product >>> |
| #1619 | Wire-guider nylon Nylon parts through which the throttle or brake-linkage slides. | View product >>> |
| #1636 | Universal throttle linkage set | View product >>> |
| #1637 | Universal adjustable brake-set | View product >>> |
| #1639 | Collar alu 2.1+setscrew (4) Collars to use for the brake and throttlelinkages. | View product >>> |
| #1647 | Steel balls 6mm (4) | View product >>> |
| #1649 | Pivotball 5.8mm (20) Pack of 20 5.8mm Balls pivot balls with hex drive. | View product >>> |
| #1650 | Pivotball 5.8mm (4) Pivotball 5.8mm (4) | View product >>> |
| #1660 | Ball-joint set 6mm (20 pieces) Set of 20 ball joints in 6.0mm diameter. Replacement set for VETEQ pushrod ball-ends. Made of high-tensile composite material for increased wear resistance. | View product >>> |
| #6124 | Nylon front bodymounts long, 2 | View product >>> |
| #6361 | Drive belt short (Kevlar) 201X6MM Timing belt for rear transmission of Impact and Impulse, and used on front transmission of Vector, S950, S950R. replacement belts: www.serpent.com/903296 www.serpent.com/903300 | View product >>> |
| #6364 | Drivebelt long (Kevlar) Side belt for Vector and Excel and Sprint s.w.b. Replacement belts: www.serpent.com/903295 www.serpent.com/903299 | View product >>> |
| #6503 | Cone flywheel 7mm long (3) Universal flywheel cone, set of 3. | View product >>> |
| #6571 | Engine mounts c.s.h. screws (4) Set of c.s.h. screws M5x12 and alu. countersunk washers. Used with Vector and Impact engine mounts. | View product >>> |
| #6579 | Centax flywheel 38mm Centax flywheel for 5mm chassis cars like Serpent 950, Vector and Excel series. Diameter 38mm. Hard anodized and PTFE coated. Fits Centax I and II. | View product >>> |
| #6582 | Centax clutchnut Replacement parts for Centax clutch system. | View product >>> |
| #6583 | Centax pre-load adjusting nut Replacement parts for Centax clutch system. | View product >>> |
| #6586 | Centax coilspring Coil-spring for Centax clutch system, diam. 1.7mm. This spring is mainly used for clutches on 2.1cc/.12 and 2.5cc/.15 size engines. The spring can be used in all versions of the Centax clutch. A harder Centax clutch spring is also available (#909520). | View product >>> |
| #6587N | Centax clutch shoe brown Standard clutch shoe for Centax, colour yellow/brown. Used mainly in 1/8 scale racing. For 1/10 scale optional 6587 clutch shoe available. | View product >>> |
| #6589 | Centax spacer thrust bearing Replacement parts for Centax clutch system. Replacement partnr: 909516 | View product >>> |
| #6599 | Centax shim-set Shim set to adjust position of Centax flywheel on crankshaft. Set of 10 shims 4pcs 7x13x0.1, 2pcs 7x13x0.3mm, 4pcs 7x13x0.5mm. | View product >>> |
| #6626 | Coilsprings and screws 2-speed Set of coilsprings and screws for 2-speed clutch shoes. Used for all Impact and Vector models. Lighter springs for Impulse gearbox available 801412. | View product >>> |
| #803169 | Adjustable rear anti-roll bar soft Aluminium soft rear anti-roll bar. Suitable for Serpent 1/8th scale chassis and 720. Comes complete with 2 grubscrews. | View product >>> |
| #804232 | Shim 3x6x3 (4) Shim 3x6x3 (4) Repalced by 110417 Shim 3X6X3 (10) | View product >>> |
| #808152 | Centering bushing threaded | View product >>> |
| #808214 | Spacer-set caster (3) Set of 2 nylon frames with 1-2-4mm caster shims. The shims can be placed in front or behind the upper suspension arm, therewith changing the caster angle of the front suspension. | View product >>> |
| #808340 | Ball-cups set nylon (12) Universal ball cups made of special low-friction composite material. Used on all models of Impulse, Impact 2 / M2 and Vector. | View product >>> |
| #808344 | Alu.adjusting nuts M10 (4) Universal alu. adjusting plugs with M10. Used on all models Impulse, Impact and Vector on steering blocks and up-rights. | View product >>> |
| #808346 | Pivot-balls 8.5mm (2) Universal pivot balls. Used in all Impulse, Impact 2 / M2 and Vector models on front and rear suspension. | View product >>> |
| #901164 | Servo mounting blocks Servo mounting blocks, injection molded composite nylon, used to mount steering and throttle servo. | View product >>> |
| #901255 | Belt tensioner Alu. belt tensioner S950, S835, S705, VETEQ. | View product >>> |
| #901355 | Brake pads, set of 4 Brake pads, made of special friction material, blue. Must be glued onto steel brake plates 901356. Set of 4. | View product >>> |
| #901356 | Steel brake plates VETEQ brake plates made of spring steel. Interchangeable with Vector, Impact and Impulse brake plates. Old style Vector and Impact brake plates (9602) cannot be used on VETEQ. Set of 2. | View product >>> |
| #902115 | Mounting-pin tank + rubber cap (2) Complete set for mounting the Serpent 950 fuel tank to the radio plate. | View product >>> |
| #902116 | Cap rubber for mounting pin tank (2) A set of two mounting rubbers & o-rings for isolating the fuel tank from vibrations. | View product >>> |
| #902120 | Mounting bracket receiver Composite receiver mounting bracket for use with the Serpent 950. | View product >>> |
| #902124 | Steering-servo lever 24T Composite steering servo lever. Suitable for Hitec servos. S950. | View product >>> |
| #902125 | Steering-servo lever 25T Composite steering servo lever for S950 . Suitable for Futaba servos | View product >>> |
| #902127 | Battery-case and holder Composite battery pack holder with composite chassis mounting point. For use with Serpent 950. | View product >>> |
| #902128 | Track-rod steel 1/8 (2) Track rod set for Serpent 1/8 in Serpent spring steel. | View product >>> |
| #902131 | Servo-saver nylon parts Main composite parts for the centrally mounted servo saver set for the Serpent 950. Comes with two different trackrod mounting points for adjusting the cars ackermann. | View product >>> |
| #902133 | Servo-saver shaft inner Steel shaft upon which the Serpent 950 servo saver pivots. | View product >>> |
| #902134 | Servo-saver shaft outer Aluminium Serpent 950 servo saver shaft with thread for servo saver pre load adjusting nut. | View product >>> |
| #902135 | Servo-saver nut Aluminum Serpent 950 servo saver pre load adjusting nut. | View product >>> |
| #902138 | Trackrod M3x23 (2) Trackrod M3x23 (2) | View product >>> |
| #902139 | Servo saver spring 2.2 black Serpent 950 servo saver spring. Slightly harder than the standard 2.1mm silver spring. | View product >>> |
| #902155 | Radioplate bracket Composite radio plate mounting bracket for Serpent 950. | View product >>> |
| #902157 | Roll-bar chrome Chrome Roll bar for Serpent 950. | View product >>> |
| #902170 | Shaft throttle-brake lever Teflon coated throttle/brake lever pivot point for use with the laydown throttle servo assembly of the Serpent 950R. Comes complete with c-clip. | View product >>> |
| #902171 | Throttle brake-lever Composite throttle brake lever for use with the Serpent 950R laydown throttle servo assembly. | View product >>> |
| #902172 | Throttle slide part Small composite throttle slide part for Serpent 950R. | View product >>> |
| #902227 | Wishbones front lower left Composite front lower left wishbone for the Serpent 950R. | View product >>> |
| #902228 | Wishbones front lower right Composite front lower right wishbone for the Serpent 950R. | View product >>> |
| #902229 | Up - stop lever L + R A set of 2, left & right, composite up stop levers for use the Serpent 950R. | View product >>> |
| #902232 | Pivot pins front lower A set of 2 high strength steel lower front pivot pins for use with the Serpent 950R. 1 machined flat spot to mount the grub-screw. | View product >>> |
| #902250 | Middle bearing block Composite middle bearing block to mount the middle layshaft. For use on the Serpent 950, 705, 835 and all previous models Impact and Impulse and Vector. | View product >>> |
| #902271 | Springs quick-change short (4) Set of 4 short quick release springs for use on the new dual fastening wheel axles for the 950 / 950R | View product >>> |
| #902283 | Needle 2.5 x 11.8 (4) Set of 4 steel needles for use with the optional Serpent 950/950R CVD set. | View product >>> |
| #902340 | Engine mounts M21 A pair of puprple anodized engine mounts for .21 size engine to mount in the Serpent 950, 950R and 960. | View product >>> |
| #902371 | Spacer alu upright (2) Pair of aluminium spacers for use the in between the bearings of the rear upright. | View product >>> |
| #902410 | 2-speed gearbox LC (no shaft incl) Complete LC gearbox set for use with all Serpent cars. Requires the cars respective LC gearbox shaft to be mounted. | View product >>> |
| #902411 | Drive-flange alu with owb Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
| #902412 | Adaptor 2-speed LC Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing. | View product >>> |
| #902413 | Carrier 2nd Gear LC Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox. | View product >>> |
| #902416 | 2-speed shoe-set LC II A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only. | View product >>> |
| #902420 | Roller pin steel 5X5 (2) A pair of steel roller pins for use in the LC gearbox. Replaced by 110202 Pin 5x5 (10) | View product >>> |
| #902421 | Needle 3x13.8 (4) Set of 4 Roll pins for use with the new LC Gearbox 2 speed adapter. Replaced by 110203 Pin 3x14 (10) | View product >>> |
| #902444 | 2-speed gear 44T (2ND) LC Composite 44T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902445 | 2-speed gear 45T (2ND) LC Composite 45T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902446 | 2-speed gear 46T (2ND) LC Composite 46T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902447 | 2-speed gear 47T (1ST) LC 47T composite 1st gear for new LC gearbox. | View product >>> |
| #902448 | 2-speed gear 48T (1ST) LC 48T composite 1st gear for new LC gearbox. | View product >>> |
| #902449 | 2-speed gear 49T (1ST) LC 49T composite 1st gear for new LC gearbox. | View product >>> |
| #902450 | 2-speed gear 50T (1ST) LC 50T composite 1st gear for new LC gearbox. | View product >>> |
| #903101 | Chassis S960 Aerospace grade aluminium chassis plate for the Serpent 960. | View product >>> |
| #903102 | Radio plate S966 Carbon fibre radio plate for the Serpent 966. | View product >>> |
| #903103 | Bearingblock FR L Composite front left bearing block for the Serpent 960. | View product >>> |
| #903104 | Bearingblock FR R Composite front right bearing block for the Serpent 960. | View product >>> |
| #903105 | Susp bracket FR Front upper suspension bracket for the Serpent 960. Suitable for both the left and right side of the car | View product >>> |
| #903106 | Wishbone FR UP L Front upper left composite wishbone for the Serpent 960. | View product >>> |
| #903107 | Wishbone FR UP R Front upper right composite wishbone for the Serpent 960. | View product >>> |
| #903108 | Steeringblock L Left composite steering block for the Serpent 960. | View product >>> |
| #903109 | Steeringblock R Right composite steering block for the Serpent 960. | View product >>> |
| #903110 | Shocktower carbon FR S960 Carbon fibre front shock tower for the Serpent 960. | View product >>> |
| #903111 | Bodyplate FR Front composite body mount plate for the Serpent 960. | View product >>> |
| #903112 | Brake eccenter alu Coated aluminium brake cam for use on the Serpent 960. | View product >>> |
| #903113 | Bearingblock RR L Composite lower rear left bearing block for the Serpent 960. | View product >>> |
| #903114 | Bearingblock RR Right Composite lower rear right bearing block for the Serpent 960. | View product >>> |
| #903115 | Brake support plate carbon Carbon fibre brake support plate for the Serpent 960. | View product >>> |
| #903116 | Shaft 2-speed 2-Speed shaft for Serpent 960 series of cars. | View product >>> |
| #903117 | Stiffener RR carbon Carbon fibre stiffener for the rear of the Serpent 960. | View product >>> |
| #903118 | Eccenter RR (2) Set of 2 composite bearing eccenters for the rear of the Serpent 960 | View product >>> |
| #903119 | Susp bracket RR L Rear upper left composite suspension bracket for the Serpent 960. | View product >>> |
| #903120 | Susp bracket RR R Rear upper right composite suspension bracket for the Serpent 960. | View product >>> |
| #903121 | Pivot insert nylon (4+4+4) Complete set of rear pivot pin inserts for the Serpent 960. | View product >>> |
| #903122 | Rear plate S960 Composite rear plate of the Serpent 960. | View product >>> |
| #903125 | Upright RR Rear composite upright for use on the Serpent 960. Suitable for both the left and right side of the car. | View product >>> |
| #903126 | Spacer upright alu (2) Pair of rear upright spacers for use on the wheel axles. | View product >>> |
| #903128 | Throttle brake-lever Composite throttle brake lever for the Serpent 960. | View product >>> |
| #903129 | Spacer swaybar RR Pair of aluminium spacers for use with the adjustable rear anti-roll bar on the Serpent 960. Comes complete with 2 grubscrews. | View product >>> |
| #903130 | Bodymount RR Rear composite bodymount. | View product >>> |
| #903131 | Shocktower RR carbon Carbon fibre rear shock tower for the Serpent 960. | View product >>> |
| #903132 | Sideplate L carbon Left carbon fibre side plate for the Serpent 960. | View product >>> |
| #903133 | Sideplate R carbon Right carbon fibre side plate for the Serpent 960. | View product >>> |
| #903134 | Bracket throttle-brake servo Composite throttle brake servo mount with pivot point for lay down configuration. Suitable for the Serpent 960. | View product >>> |
| #903135 | Mount-supports servo Full set of servo mount supports. | View product >>> |
| #903136 | Shim 3.1x8x5 nylon (2) Pair of white nylon spacers for use under the fueltank mounts on the Serpent 960. | View product >>> |
| #903137 | Fueltank 125ccm with AFL-lid 125cc Fuel tank for the Serpent 960. Comes complete with AFL lid and has been designed to fit the Serpent 960 throttle brake lever assembly. replaced by 903278 | View product >>> |
| #903138 | Servo saver lever 23T Composite servo saver lever with 23T. Suitable for use with Sanwa, KO & JR servos. | View product >>> |
| #903139 | Servo saver lever 24T Composite servo saver lever with 24T. Suitable for use with Hitec servos. | View product >>> |
| #903140 | Servo saver lever 25T Composite servo saver lever with 23T. Suitable for use with Futaba servos. | View product >>> |
| #903141 | Battery-support plate S960 Carbon battery mounting plate for the Serpent 960. | View product >>> |
| #903142 | Powerstart pos supp. Set of front and rear Powerstart starter box alignment brackets for the Serpent 960. | View product >>> |
| #903145 | Suspension-set FR S960 Complete set of spare nylon parts for the front of the Serpent 960. | View product >>> |
| #903146 | Suspension-set RR S960 Complete set of spare nylon parts for the rear of the Serpent 960. | View product >>> |
| #903147 | Instruction Manual S960 Full Colour Instruction manual for the Serpent 960. | View product >>> |
| #903148 | Reference guide S960 Full Colour Reference guide for the Serpent 960. | View product >>> |
| #903149 | Setup booklet S960 Full colour Setup booklet for the Serpent 960. | View product >>> |
| #903150 | Decal S960 Serpent 960 A5 decalsheet in Orange, black and white and A4 Serpent decalsheet with SPP logos in black, white and Orange. Fuel resistant. | View product >>> |
| #903151 | Decal S960 A5 Serpent 960 A5 decalsheet in Orange, black and white. Fuel resistant. | View product >>> |
| #903155 | Axle solid rear Steel rear main axle for the Serpent 960. | View product >>> |
| #903156 | Driveshaft rear 62mm (2) Pair of 2 Hudy spring steel driveshafts for the rear of the Serpent 960. | View product >>> |
| #903157 | Receiver bracket 710/960 Composite receiver bracket for the Serpent 710 and 960. | View product >>> |
| #903164 | Shock-set RCC front (2) Complete pre assembled short RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touring cars. | View product >>> |
| #903165 | Shock-set RCC long (2) Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
| #903166 | Shock rod short (2) A set of 2 short shock rods for use in RCC shocks. | View product >>> |
| #903167 | Shock rod long (2) A set of 2 long shock rods for use in RCC shocks. | View product >>> |
| #903168 | Nylon parts frame shocks RCC Complete set (4) of composite RCC shock absorber components. | View product >>> |
| #903169 | Insert shock (2) A set of 2 RCC composite shock absorber inserts. New: Use 903336 and 903332 instead | View product >>> |
| #903170 | Arm body-wing RR (2) Composite rear A arms for connecting rear body mount to the rear uprights. | View product >>> |
| #903171 | O-ring 10x1 (4) Set of 4 o-rings for use in the RCC shock absorbers. | View product >>> |
| #903175 | Foam insert (4) Set of 4 foam inserts for use in the RCC shock absorbers. | View product >>> |
| #903177 | Nut shock alu (2) Set of 2 anodised aluminium shock absorber nuts. Suitable for the RCC shock absorbers. | View product >>> |
| #903178 | Body alu shock FR (2) A pair of front aluminium RCC shock bodies. | View product >>> |
| #903179 | Body alu shock RR (2) A pair of rear aluminium RCC shock bodies. | View product >>> |
| #903186 | C + G Clip + washer RCC shocks (12) Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks. | View product >>> |
| #903197 | Steering Servo mount V2 Composite steering servo mount for the Serpent 960. Features two mounting holes for attaching the option transponder holder (#1666) | View product >>> |
| #903199 | Centax flyweights PTFE machined for .21 Complete set of 3 flyweights for use in the Centax clutch system for .21 engines. | View product >>> |
| #903200 | O-ring 3.3 x 1.5 RCC shocks (10) Set of 10 purple o-rings for use in the RCC shock absorbers. | View product >>> |
| #903214 | Bearing block FR Left Hard Front left bearing block, hard material. Replaced by 903264. | View product >>> |
| #903215 | Bearing block FR R Hard Composite front right bearing block for the Serpent 960. This bearing block has been made from harder material than the original kit version. Replaced by 903265 | View product >>> |
| #903216 | Wishbone RR lower Hard Lower rear composite wishbone for the Serpent 960. Suitable for both the left and right of the car. Made from harder material than the original version this wishbone also features an additional anti-roll bar mounting point. | View product >>> |
| #903217 | Wishbone RR upper Hard Upper rear composite wishbone for use on the Serpent 960. Suitable for both the left and rear side of the car this wishbone has been made from harder material than the original kit version. | View product >>> |
| #903228 | Bearing block RR left V2 New rear left bearing block for the Serpent 960. Features extra stiffening ribs along with an additional mounting hole to completely reduce flex around the pulley side of the gearbox shaft. | View product >>> |
| #903233 | Steering block WOS (2) Pair of wide offset (WOS) steering blocks for the Serpent 960. | View product >>> |
| #903235 | Shim 12x15x0.25 (10) Shim 12x15x0.25 (10) | View product >>> |
| #903389 | Fueltank 125cc 1/8 on-road Fueltank 125cc 1/8 on-road with an new design fuel cap. | View product >>> |
| #909216 | Adjustable front anti-roll bar blade (male) Adjustable front anti-roll bar blade with ball (male). For Vector all Specs. | View product >>> |
| #909217 | Adjustable front anti-roll bar blade (female) Adjustable front anti-roll bar blade, female part. For Vector all Specs. | View product >>> |
| #909220 | Driveshafts front (2) Ultra durable, light yet strong precision machined front drive shafts for Vector all Specs. | View product >>> |
| #909222 | Wheel-axles set front (2) Standard front wheel axles for Vector all Specs. Made of high tensile steel and heat treated for extreme durability. Designed as quick-change system. Optional fixed wheel adapters 909328 available. | View product >>> |
| #909224 | Wheel axle shims (2) Set of 2 shims 12x18x0.3mm to protect wheel axle bearings. | View product >>> |
| #909225 | Oneway front axle Vector Alu. front axle for Vector all Specs, with 1-way bearings pressed in. Use only Serpent One-Way Lube 1680 to lubricate the one-way bearings. | View product >>> |
| #909236 | Pulley / flange 16t Pulley 16T for middle shaft (center). For Vector all Specs. | View product >>> |
| #909238 | Pulley / flange 18t Pulley 18T for 2-speed shaft (side). For Vector all Specs. | View product >>> |
| #909242 | Pulley 22T Pulley 22T for 2-speed shaft (center). | View product >>> |
| #909244 | Pulley / flange 24t Optional pulley 24T for middle shaft (side). For Vector all Specs. | View product >>> |
| #909245 | Pulley / flange 25t Pulley 25T for middle shaft (center). For Vector all Specs. | View product >>> |
| #909248 | Brake - pulley adaptor alu. Brake pulley adaptor with grubscrew. Made from aluminum with two mounted steel pins for driving the brake disc. | View product >>> |
| #909250 | Pulley adaptor alu. (2) Pulley adapter for middle shaft pulleys. For Vector all Specs. | View product >>> |
| #909373 | Drive-belt Kevlar 8mm Kevlar reinforced timingbelt for rear transmission of Vector all Specs. Width 8mm. | View product >>> |
| #909395 | Pulley solid axle 51T 51T composite pulley for rear of Serpent 950, NT, Vector, Veteq. | View product >>> |
| #909404 | Spring-support washers (4) Set of four spring support washers. | View product >>> |
| #909510 | Centax-II clutch-set (excl. Flywheel) Complete Centax-II clutch set with everything needed to mount it to your engine with the exception of the flywheel. All bearings, shoes, shims and a bell housing with a 16/19 gear ratio is supplied. | View product >>> |
| #909512 | Centax-II clutch-housing universal Ultra strong spring steel Centax-II clutch bell housing. | View product >>> |
| #909514 | Centax II bearing spacer 5x7 Aluminium spacer for use in the Centax-II clutch system. | View product >>> |
| #909515 | Centax II centrifugal shoes (3) A set of 3 carbon flyweights for use in both Centax-I & II clutch systems. | View product >>> |
| #909516 | Centax II Spacer Thrustbearing Sapcer for use with Centax-II clutch system. Comes complete with screw. | View product >>> |
| #909518 | Centax coilspring 1.8 1.8mm diameter spring steel coil spring for use with the Centax-I and Centax-II clutch systems for use with 3.5cc/.21 engines. A softer version is also available (#6586). Replaced by #909520 | View product >>> |
| #909519 | Centax II shims 5 x 10 x 0.3 (2) + 0.5 (1) Set of 3 Centax-II shims in two sizes 0.3 (2) and 0.5 (1). | View product >>> |
| #909555 | Centax gear-pinion alu 15t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909556 | Centax gear-pinion alu. 16t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909558 | Centax gear-pinion alu. 18t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909559 | Centax gear-pinion alu. 19t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909560 | Centax gear-pinion alu. 20t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #9226 | Alu. lever quick-change system | View product >>> |
| #9319 | Belt tensioner steel (no b.b.) Belt tensioner wire used on all Vector, Imapct and Excel 4-WD versions. | View product >>> |
| #9606 | Brake disk steel ventilated (2) Steel brake disk with 6 cooling-sleeves for optimal ventilation of the disks. Set of 2 pieces. Use part #9612 as an additional cooling aid between the Brake disks. | View product >>> |
| #9611 | Steel brake disks (2) MK-2 Brake discs for all 1/8 and 1/10 scale Serpent cars. Set of 2. | View product >>> |
| #9612 | Special ventilated brake-disc Alu. spacer to created vented disc brake. For all Excel and Vector versions. | View product >>> |
| #9618 | Alu. collar brake-pulley MK-2 Alu. collar for middle pulley on 2-speed axle, used on all Impulse, Impact and Vector versions. | View product >>> |
| #9619 | Alu. pulley adapter 19t MK-2 Alu. pulley adapter for side pulley on 2-speed shaft, for all Impact and Vector versions. | View product >>> |
News