> Serpent 960 07 1/8 scale 4WD (#903004) - DISCONTINUED
- Brand:
- Serpent
Product Type:- Gas Cars > 1/8
Following on from the successful Serpent 960 and the special edition 960 FD comes this new 2007 version of the 960. Featuring some performance enhancing and durability upgrades, this car is the natural evolution of the previous versions.
Related products
View: Text | Images
> Optional parts
| #1015 | Torx engine mount screws/washers Engine mounting screws for Impact and Vector. TORX head allows for higher torque to be applied to the screws, adding extra reliability. TORX-wrench 1014 required. Size M5x12. Countersunk alu. washers included. | View product >>> |
| #1017 | Screws engine mount + flange (4) Special steel engine mounting screws, allen type. Integrated washer for easy assembly. | View product >>> |
| #1018 | Screw-flanged M4x14 allen (4) High quality flanged screw in size M4x14 to fasten the front part of the S950 radioplate and to use as engine mounting screws in the chassis of the 200mm cars | View product >>> |
| #1070 | Grommet rubber soft (4) High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes. | View product >>> |
| #1388 | Thrust bearing 5x10 Ceramic 5x10 thrust bearing with ceramic balls. Ligther and more durable with perfect run-ways. A direct replacement for the standard thurst-bearing, to be used in Centax-3 clutch system. | View product >>> |
| #1434 | Pressure nipple angled Right angled back pressure nipple. Suitable for all Serpent fuel tanks. | View product >>> |
| #1462 | Centax Nut & Pressure Nipple Tool Handy composite tool for adjusting the Centax clutch nut and for the mounting the fuel line nipples. | View product >>> |
| #1595 | Exhaust wire mount Aluminum exhaust wire mount for Serpent 950. Comes with grubscrew. | View product >>> |
| #160104 | Shock RCM body alu (2) Shock RCM body alu (2) | View product >>> |
| #160106 | Shock RCM top nut (2) | View product >>> |
| #160306 | Spring purple L23 (6.8/39) (2) Pair of 23mm long purple springs (6.8/39). | View product >>> |
| #160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
| #160330 | Spring set L27 (5) Set of 5 pairs of 27mm long shock absorber springs. The set includes red, purple, green, pink and blue springs. | View product >>> |
| #1693 | Battery pack 5 cell 1100Mah (1/18) A five cell battery pack suitable for use in 1/18th scale electric rc cars. The cells are 1100Mah. Comes shrink wrapped and with cable and plug. | View product >>> |
| #6123A | Body posts aluminium short (2) ( use 903502) Aluminium body posts for Serpent chassis'. Comes in a pack of 2 with the mounting screws and a pair of body clips. Replaced by 903502. | View product >>> |
| #6587 | Centax clutch shoe black Graphite Centax clutch shoe, provides softer engaging of the clutch than the yellow type (6587N). Mainly used in 1/10 scale racing. | View product >>> |
| #6587XP | Centax clutch shoe XP Black Centax clutch shoe XP (Xtra Performance) for added punch to your engine. | View product >>> |
| #801159 | Spacer Fuel-tank Capacity (5) Set of 5 spacers and two screws to allow you to adjust the capacity of your fuel tank. | View product >>> |
| #803204 | Anti-Roll bar blade FR soft set Pair of soft anti roll bar blades. | View product >>> |
| #804253 | Pivotball 5.8mm alu coated long (4) Pivotball 5.8mm alu coated long (4) | View product >>> |
| #808251 | Middle bearing block 4-WD aluminium Optional middle bearing block for all Serpent cars (less Veteq). Interchangeable with standard composite middle bearing block. | View product >>> |
| #902129 | Turnbuckle 65mm titanium (2) High quality machined Titanium track-rods (lightweight and very durable) to use on 1/8 scale racing cars. Complete with 6mm ball-joints. Can be used as replacement for the original track-rods. | View product >>> |
| #902156 | Radioplate bracket aluminum S-950 Aluminum radio plate bracket for mounting the Serpent 950/960/966 radio plate. Comes with fastening material. | View product >>> |
| #902253 | Middle Shaft alu coated Coated lightweight aluminium middle shaft. | View product >>> |
| #902254 | Middle shaft steel light SPP Spring steel, lightweight middle shaft for 1/8 scale chassis'. | View product >>> |
| #902270 | Wheel-axles front QC-fixed set Front wheel axle set, including 2 high quality lightweight axles, wheels nuts, quick release springs, alu spacers and o-rings. | View product >>> |
| #902280 | Wheel-axles front CV set Complete set of front CVDs (constant velocity drive) for the Serpent 950 / 950R. Set includes wheel axles and drive shafts and all parts required to complete the set as well as fixed wheel and quick release wheel mounting methods. | View product >>> |
| #902281 | Driveshafts front CV (2) A set of 2 ultra hard steel driveshafts for use on the 950 / 950R with the all new front CVD set. | View product >>> |
| #902282 | Insert steel CV (2) Steel inserts for use with the all new front CV set for the Serpent 950 / 950R. Comes with 2 fastening grubscrews. | View product >>> |
| #902284 | Spacer alu Steeringblock (2) A pair of aluminium spacers to be mounted on the front wheel axle between the main bearings in the steering block. | View product >>> |
| #902341 | Engine monoblock M21 Single piece engine block machined from a single block of aluminium. Suitable for 21 size engines. Will suit almost all Serpent chassis, but not the Veteq. | View product >>> |
| #902370 | Wheel-axles rear QC-fixed set Rear wheel axle set, including 2 high quality lightweight axles, wheels nuts, quick release springs, alu spacers and o-rings. | View product >>> |
| #902444 | 2-speed gear 44T (2ND) LC Composite 44T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902445 | 2-speed gear 45T (2ND) LC Composite 45T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902446 | 2-speed gear 46T (2ND) LC Composite 46T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902447 | 2-speed gear 47T (1ST) LC 47T composite 1st gear for new LC gearbox. | View product >>> |
| #902448 | 2-speed gear 48T (1ST) LC 48T composite 1st gear for new LC gearbox. | View product >>> |
| #902449 | 2-speed gear 49T (1ST) LC 49T composite 1st gear for new LC gearbox. | View product >>> |
| #902450 | 2-speed gear 50T (1ST) LC 50T composite 1st gear for new LC gearbox. | View product >>> |
| #903121 | Pivot insert nylon (4+4+4) Complete set of rear pivot pin inserts for the Serpent 960. | View product >>> |
| #903127 | Anti-roll bar rear adjustable Anti-roll bar rear adjustable complete | View product >>> |
| #903143 | Roll center spacer 1mm carbon Set of 6 roll centre spacers. 1mm in thickness they are suitable for use under the front suspension brackets of the Serpent 960 to adjust roll center. | View product >>> |
| #903158 | Lever FR quick-change alu light (2) T2 Pair of lightweight quick release levers for your Serpent 1/8th scale front wheel axles. T2 version features grub screws for fixing drive pin in place. | View product >>> |
| #903159 | Lever RR quick-change alu light (2) T2 Pair of lightweight quick release levers for your Serpent 1/8th scale rear wheel axles. T2 version features grub screws for fixing drive pin in place. | View product >>> |
| #903160 | Eccenter bearing alu (2) Pair of aluminium bearing eccenters for use on the front and rear axles bearings on the Serpent 960. | View product >>> |
| #903162 | Rear Plate S960 alu grey Grey aluminium rear plate for Serpent 960. | View product >>> |
| #903163 | Rear Plate S960 alu orange Orange aluminium rear plate for Serpent 960. | View product >>> |
| #903185 | Shim 4x9x1 RCS (12) A package of 12 shims, sized 4 x 9 x 1mm. | View product >>> |
| #903187 | Eccenter frame for Upper bracket alu Set of 4 composite pivot pin inserts for the optional aluminum upper front suspension bracket. | View product >>> |
| #903188 | Battery Pack 5-cell S960 Pre made 5 cell, 920mAh, battery pack for the Serpent 960 chassis. | View product >>> |
| #903189 | Middle Bracket set alu S960 / 950 Middle bracket set consisting of aluminium middle bracket, aluminium middle shaft, 2 lightweight pulley adaptors and 2 bearings. The set comes with the required fastening material. | View product >>> |
| #903190 | Support set carbon body support RR Carbon set for rear body mount support. Includes carbon plate and 2 aluminium spacers. | View product >>> |
| #903191 | Chassis set S960 LCG Pro Complete LCG chassis set for the Serpent 960. Features the grey hard anodised chassis plate, carbon filler plate and the LCG engine monoblock. Comes complete with the required fasteners. | View product >>> |
| #903192 | Chassis S960 LCG/Pro Grey anodised LCG chassis plate for the Serpent 960 | View product >>> |
| #903193 | Filler-plate carbon for LCG chassis Carbon filler plate, to be used only with the optional LCG chassis for the Serpent 960. | View product >>> |
| #903194 | Mono block M21 LCG Machined aluminium engine mono block for use with the Serpent 960 LCG chassis. Comes supplied with mounting screws. Suitable only for MEGA ZX and other Picco made engines. | View product >>> |
| #903195 | Battery-plate carbon closed Carbon fibre battery plate for the Serpent 960. | View product >>> |
| #903196 | Carbon transponder holder & mount Set S960 Carbon transponder holder made and Steering servo mount for the Serpent 960. Comes with all the necessary fasteners. | View product >>> |
| #903198 | Pulley Solid axle 51T Fast Composite rear 51T Fast pulley for use on the Serpent 960, 950R, 950 and Vector. | View product >>> |
| #903199 | Centax flyweights PTFE machined for .21 Complete set of 3 flyweights for use in the Centax clutch system for .21 engines. | View product >>> |
| #903202 | RCC shock absorber tool Anodised aluminium tool to aid correct assembly of the RCC shock absorber. | View product >>> |
| #903203 | Lever throttle brake alu w bearings Aluminium throttle brake lever set for use with the laydown servo configuration of the Serpent 950, 950R and 960. Comes complete with bearings and alu spacer. | View product >>> |
| #903208 | 2-Speed shaft 960 SPP Spring steel 2-speed shaft for the Serpent 960 | View product >>> |
| #903209 | Teflon brake pads (4) Set of 4 Teflon brake pads for use with all modern Serpent chassis'. | View product >>> |
| #903213 | Set nylon parts hard 960 (8) Harder plastics set for the Serpent 960. The set consists of Rear lower wishbones (2), Rear upper wishbones (2), Rear bearing blocks (2) & Front bearing blocks (2) | View product >>> |
| #903220 | Bushing / bearing set ceramic 12x18 (12) Complete set of 12 12x18mm ceramic bearings, 12 inserts and 6 spacers for the Serpent 960. | View product >>> |
| #903221 | Bushing Set for 12x18 (12) Bushing Set for use on your Serpent 960. Comes with 12 bushings and 6 steel spacers. | View product >>> |
| #903222 | Centax-2 revision set This Centax 2 revision set contains clutch plate, yellow clutch shoe, flyweights, main bearings and ceramic thrust bearing. | View product >>> |
| #903225 | Bushing Alu for 12x18 (2+2) Set of 4 bushings, 2 for front and 2 for rear, to be placed on the front and rear axles between the main bearings in the steering blocks and rear uprights. Should be used with #903220 when using the optional wheel nut axles. | View product >>> |
| #903226 | Shock rod RCC short Ti-Ni (2) Pair of short Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903227 | Shock rod RCC long Ti-Ni (2) Pair of long Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903234 | Steering block WOS L+R Pro set Wide offset (WOS) steering block Pro Set that includes 2 steering blocks, bearing eccenters, ceramic bearings, spacers and nylon pivot ball nuts. | View product >>> |
| #903239 | Centax-2 clutch shoe red Red clutch shoe for Centax-II. | View product >>> |
| #903251 | Ventilated brake disc 1/8th Ventilated single piece brake disc for use on the Serpent 960 and older 1/8th scale chassis'. | View product >>> |
| #903252 | Upgrade set 960 to v08 OS1 Complete upgrade set for converting the 960-07 to the 2008 OS1 version. The set includes chassis plate, front and rear upgrade packs and instruction manual. | View product >>> |
| #903253 | Upgrade-set 960 OS1 RR Rear 960-08 upgrade set includes upper and lower wishbones, new OS1 uprights, a-arms, new axle bearings and other required hardware. | View product >>> |
| #903254 | Upgrade set OS2 rear Upgrade set OS2 rear | View product >>> |
| #903255 | Upgrade-set 960-08 FR Front 960-08 upgrade set includes the new front bearing blocks, lower wishbones, new anti-roll bar mounts, lower hinge pins and other required hardware. | View product >>> |
| #903289 | Weight radioplate-support brass Weight radioplate-support brass | View product >>> |
| #903348 | Pulley alu 16T anodized Pulley alu 16T hard-anodized for the 960 and 966 with engraved tooth number. Comes complete with grub-screw. Lower friction alu pulley, and less dust and dirt will attach to the metal, keeping a smooth drivetrain. | View product >>> |
| #903349 | Pulley alu 18T hard anodized Pulley alu 18T hard anodized | View product >>> |
| #903350 | Pulley alu 25T anodized Pulley alu 25T hard-anodized for the 960 and 966 with engraved tooth number. Comes complete with grub-screw. Lower friction alu pulley, and less dust and dirt will attach to the metal, keeping a smooth drivetrain. | View product >>> |
| #903387 | Clutch housing centax 2 alu Clutch housing centax 2 alu Precision machined Centax-2 clutch-housing in special grade aluminum to create extra grip for the clutch-shoes. Perfect threading to mount the hardcoated alu gear-pinions. 70% lighter than the steel version. Best used with 6587-XP black clutch shoe. | View product >>> |
| #903388 | Servo saver top + bottom alu (2) Servo saver top + bottom alu (2) version with adjustable ackermann, with insert plates. o, +1.25 or +1.25 | View product >>> |
| #903390 | Centax set Ultra 1/8 Centax-2 set Ultra 1/8 Complete Centax clutch-set for 1/8 scale 966 , with alu clutchbell, XP clutch shoe and machined carbon flyweights. Lighter and more punch. Assembly and set-up same as Centax-2. | View product >>> |
| #903396 | Pivot-balls 8.5mm TiN coated titanium (8) Pivot-balls 8.5mm TiN coated titanium (8) 2.2 grams each. | View product >>> |
| #903397 | Centax True Motion clutch set 1/8 Centax True Motion clutch set 1/8 Replacement part nr:903649 / 903884 | View product >>> |
| #903399 | Flywheel Centax True Motion 1/8 Flywheel Centax True Motion 1/8 | View product >>> |
| #903400 | Clutch support disk Centax True Motion 1/8 Clutch support disk Centax True Motion 1/8 | View product >>> |
| #903402 | Body post aluminium short (2) Body post aluminium short (2) | View product >>> |
| #903651 | Inner driveshaft adapter light Inner driveshaft adapter light | View product >>> |
| #903856 | Belt 60S3M432 MBL competition S9XX Belt 60S3M432 MBL competition S9XX | View product >>> |
| #909223 | Wheel-axle front WOS + spacer (2) WOS (Wide-of-stand) wheel axles, made from heat-treated steel for extra rigidity and strength. Comes complete with shims. | View product >>> |
| #909228 | Wheel-axle shim steel conical (4) Special hardened conical support washers for the wheel axles. These shims are mounted on the front and rear wheel axles to give better support to the inside of the wheels. These shims are required when using fixed wheel adapters 909328. | View product >>> |
| #909244 | Pulley / flange 24t Optional pulley 24T for middle shaft (side). For Vector all Specs. | View product >>> |
| #909251 | Pulley-adaptor alu light (2) Set of 2 lightweight pulley adaptors for use with the 1/8th scale range of cars. Comes with mounting grubscrews. | View product >>> |
| #909253 | Pulley 16T alu H-anodised Lightweight aluminium 16T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909254 | Pulley 18T alu H-anodised Lightweight aluminium 18T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909255 | Pulley 24T alu H-anodised Lightweight aluminium 24T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909257 | Pulley-Brake 22T alu H-anodised Lightweight aluminium 22T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909323 | Wheel-axle set rear light (wide off-set) (2) Super light, rear wheel axle set, of the highest quality | View product >>> |
| #909414 | Spring-set d=1.5 l=27-22.7 orange (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Soft spring-tension. Color: Orange | View product >>> |
| #909415 | Spring-set d=1.5 l=27-22.7 white (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium-soft spring-tension. Color: White | View product >>> |
| #909416 | Spring-set d=1.6 l=27-22.7 yellow (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium spring-tension. Color: Yellow | View product >>> |
| #909417 | Spring-set d=1.7 l=27-22.7 red (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Medium-hard spring-tension. Color: Red | View product >>> |
| #909418 | Spring-set d=1.8 l=27-22.7 blue (4) Coil-spring set for Vector, Impact and Impulse cars. Set consists of 2 front and 2 rear springs. Hard spring-tension. Color: Blue | View product >>> |
| #909419 | Spring-set D=1.9 L=27-22.7 purple (4) A full set of 4 Purple springs. The hardest in the Serpent range. | View product >>> |
| #909420 | Spring-Set D=2.0 L=27-22.7 grey (4) Set of 4 ultra hard, powder caoted, grey springs. | View product >>> |
| #909513 | Centax II Clutch Housing Light Ultra lightweight Centax-II Clutch bell. Made from coated high tensile steel. | View product >>> |
| #909555 | Centax gear-pinion alu 15t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909556 | Centax gear-pinion alu. 16t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909558 | Centax gear-pinion alu. 18t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909559 | Centax gear-pinion alu. 19t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909560 | Centax gear-pinion alu. 20t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909575 | Centax gear-pinion steel 15t High-tensile steel precision pinion for Centax clutch. Heat-treated for extreme durability! | View product >>> |
| #909576 | Centax gear-pinion steel 16t High-tensile steel precision pinion for Centax clutch. Heat-treated for extreme durability! | View product >>> |
| #909577 | Centax gear-pinion steel 17t High-tensile steel precision pinion for Centax clutch. Heat-treated for extreme durability! | View product >>> |
| #909578 | Centax gear-pinion steel 18t High-tensile steel precision pinion for Centax clutch. Heat-treated for extreme durability! | View product >>> |
| #909579 | Centax gear-pinion steel 19t High-tensile steel precision pinion for Centax clutch. Heat-treated for extreme durability! | View product >>> |
| #909580 | Centax gear-pinion steel 20t High-tensile steel precision pinion for Centax clutch. Heat-treated for extreme durability! | View product >>> |
| #909851 | Tyre savers 1/8 BBS (10) Extend your tire life! Side wall protection rings, fit Vector rear wheels. Are glued onto the side-walls of the rear tire and to the rim. Provide extra protection of the side-wall of the tire during contact with barriers. | View product >>> |
| #9607 | Race brakepad-set L + R (type A) Complete set of steel brake-plates with a special type of pre-mounted brake-liner. Fits all Serpent cars. After rigorous testing we found this brake liner compound maintains a very high coefficient of friction under all sorts of conditions. It needs limited time to heat up and then stays very stable. You never need to glue brake pads again!. The liners are mounted onto the plates in an industrial oven and then ground to the correct thickness. | View product >>> |
| #9623 | Collar Brake-Pulley adaptor light (2) Lightweight alu collar for use on the rear layshaft to hold the pulley on place. Works with all Serpent cars. Comes complete with grubscrew. | View product >>> |
News