> Serpent 960 08 1/8 scale 4WD (#903008) - DISCONTINUED
- Brand:
- Serpent
Product Type:- Gas Cars > 1/8
The follow up to the successful 960-07, the 08 features a number of performance enhancing geometry changes and durability upgrades as well as including some optional parts as standard.
Related products
View: Text | Images
> Spare parts
| #1065 | O-rings alu front axle (10) | View product >>> |
| #1093 | Centax 5x8 shim-set 0.1 (2) 0.3 (1) Special shims to adjust end-play on the Centax clutch housing. Shims are used on the outside of the thrust-bearing bushing. Set includes 2 shims of 0.1mm and 1 shim of 0.3mm. | View product >>> |
| #110300 | E-clip 2.3 (10) E-clip 2.3 (10) | View product >>> |
| #110301 | E-clip 3.2 (10) E-clip 3.2 (10) | View product >>> |
| #110302 | E-clip 4.0 (10) E-clip 4.0 (10) | View product >>> |
| #110303 | E-clip 5.0 (10) E-clip 5.0 (10) | View product >>> |
| #110304 | E-clip 7.0 (10) E-clip 7.0 (10) | View product >>> |
| #1289 | Shim 3x6x1 (10) Set of 10 shims 3x6x1 | View product >>> |
| #1296 | Washer black nylon M3x7x0.5 (4) Set of 4 black nylon washers. Size M3x7x0.5 | View product >>> |
| #1595 | Exhaust wire mount Aluminum exhaust wire mount for Serpent 950. Comes with grubscrew. | View product >>> |
| #1601 | Body clips (10) Set of 10 galvanised steel body-clips. | View product >>> |
| #160122 | Shock balljoint short on-road (2) Shock balljoint short on-road (2) | View product >>> |
| #1602 | Tank-clips small (10) Packet of 10 small body clips for mounting the fuel tank. Can also be used as body-clips for smaller rc cars. | View product >>> |
| #160306 | Spring purple L23 (6.8/39) (2) Pair of 23mm long purple springs (6.8/39). | View product >>> |
| #160308 | Spring grey L23 (9/51.5) (2) Pair of 23mm long grey springs (9/51.5). | View product >>> |
| #160309 | Spring black L23 (10/57) (2) Pair of 23mm long black springs (10/57). | View product >>> |
| #160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
| #160323 | Spring red L27 (4.1/23.5) (2) Pair of 27mm long red springs (4.1/23.5). | View product >>> |
| #160324 | Spring pink L27 (4.9/28) (2) Pair of 27mm long pink springs (4.9/28). | View product >>> |
| #160325 | Spring blue L27 (5.8/33) (2) Pair of 27mm long blue springs (5.8/33). | View product >>> |
| #160326 | Spring purple L27 (6.8/39) (2) Pair of 27mm long purple springs (6.8/39). | View product >>> |
| #160327 | Spring green L27 (8/45.5) (2) Pair of 27mm long green springs (8/45.5). | View product >>> |
| #160328 | Spring grey L27 (8/45.5) (2) Pair of 27mm long grey springs (8/45.5). | View product >>> |
| #160329 | Spring black L27 (10/57) (2) Pair of 27mm long black springs (10/57). | View product >>> |
| #160330 | Spring set L27 (5) Set of 5 pairs of 27mm long shock absorber springs. The set includes red, purple, green, pink and blue springs. | View product >>> |
| #1615 | Ball-joints 4mm (4) | View product >>> |
| #1619 | Wire-guider nylon Nylon parts through which the throttle or brake-linkage slides. | View product >>> |
| #1636 | Universal throttle linkage set | View product >>> |
| #1637 | Universal adjustable brake-set | View product >>> |
| #1639 | Collar alu 2.1+setscrew (4) Collars to use for the brake and throttlelinkages. | View product >>> |
| #1649 | Pivotball 5.8mm (20) Pack of 20 5.8mm Balls pivot balls with hex drive. | View product >>> |
| #1650 | Pivotball 5.8mm (4) Pivotball 5.8mm (4) | View product >>> |
| #6361 | Drive belt short (Kevlar) 201X6MM Timing belt for rear transmission of Impact and Impulse, and used on front transmission of Vector, S950, S950R. replacement belts: www.serpent.com/903296 www.serpent.com/903300 | View product >>> |
| #6364 | Drivebelt long (Kevlar) Side belt for Vector and Excel and Sprint s.w.b. Replacement belts: www.serpent.com/903295 www.serpent.com/903299 | View product >>> |
| #6503 | Cone flywheel 7mm long (3) Universal flywheel cone, set of 3. | View product >>> |
| #6579 | Centax flywheel 38mm Centax flywheel for 5mm chassis cars like Serpent 950, Vector and Excel series. Diameter 38mm. Hard anodized and PTFE coated. Fits Centax I and II. | View product >>> |
| #6582 | Centax clutchnut Replacement parts for Centax clutch system. | View product >>> |
| #6583 | Centax pre-load adjusting nut Replacement parts for Centax clutch system. | View product >>> |
| #6587N | Centax clutch shoe brown Standard clutch shoe for Centax, colour yellow/brown. Used mainly in 1/8 scale racing. For 1/10 scale optional 6587 clutch shoe available. | View product >>> |
| #6599 | Centax shim-set Shim set to adjust position of Centax flywheel on crankshaft. Set of 10 shims 4pcs 7x13x0.1, 2pcs 7x13x0.3mm, 4pcs 7x13x0.5mm. | View product >>> |
| #6626 | Coilsprings and screws 2-speed Set of coilsprings and screws for 2-speed clutch shoes. Used for all Impact and Vector models. Lighter springs for Impulse gearbox available 801412. | View product >>> |
| #802328 | Pivot pin rear upper (2) Set of 2 steel rear upper pivot pins with grinded flat spots for the Serpent 710. | View product >>> |
| #803169 | Adjustable rear anti-roll bar soft Aluminium soft rear anti-roll bar. Suitable for Serpent 1/8th scale chassis and 720. Comes complete with 2 grubscrews. | View product >>> |
| #804232 | Shim 3x6x3 (4) Shim 3x6x3 (4) Repalced by 110417 Shim 3X6X3 (10) | View product >>> |
| #808152 | Centering bushing threaded | View product >>> |
| #808214 | Spacer-set caster (3) Set of 2 nylon frames with 1-2-4mm caster shims. The shims can be placed in front or behind the upper suspension arm, therewith changing the caster angle of the front suspension. | View product >>> |
| #808346 | Pivot-balls 8.5mm (2) Universal pivot balls. Used in all Impulse, Impact 2 / M2 and Vector models on front and rear suspension. | View product >>> |
| #901164 | Servo mounting blocks Servo mounting blocks, injection molded composite nylon, used to mount steering and throttle servo. | View product >>> |
| #901255 | Belt tensioner Alu. belt tensioner S950, S835, S705, VETEQ. | View product >>> |
| #901355 | Brake pads, set of 4 Brake pads, made of special friction material, blue. Must be glued onto steel brake plates 901356. Set of 4. | View product >>> |
| #901356 | Steel brake plates VETEQ brake plates made of spring steel. Interchangeable with Vector, Impact and Impulse brake plates. Old style Vector and Impact brake plates (9602) cannot be used on VETEQ. Set of 2. | View product >>> |
| #902115 | Mounting-pin tank + rubber cap (2) Complete set for mounting the Serpent 950 fuel tank to the radio plate. | View product >>> |
| #902116 | Cap rubber for mounting pin tank (2) A set of two mounting rubbers & o-rings for isolating the fuel tank from vibrations. | View product >>> |
| #902120 | Mounting bracket receiver Composite receiver mounting bracket for use with the Serpent 950. | View product >>> |
| #902124 | Steering-servo lever 24T Composite steering servo lever. Suitable for Hitec servos. S950. | View product >>> |
| #902125 | Steering-servo lever 25T Composite steering servo lever for S950 . Suitable for Futaba servos | View product >>> |
| #902128 | Track-rod steel 1/8 (2) Track rod set for Serpent 1/8 in Serpent spring steel. | View product >>> |
| #902133 | Servo-saver shaft inner Steel shaft upon which the Serpent 950 servo saver pivots. | View product >>> |
| #902134 | Servo-saver shaft outer Aluminium Serpent 950 servo saver shaft with thread for servo saver pre load adjusting nut. | View product >>> |
| #902135 | Servo-saver nut Aluminum Serpent 950 servo saver pre load adjusting nut. | View product >>> |
| #902138 | Trackrod M3x23 (2) Trackrod M3x23 (2) | View product >>> |
| #902155 | Radioplate bracket Composite radio plate mounting bracket for Serpent 950. | View product >>> |
| #902157 | Roll-bar chrome Chrome Roll bar for Serpent 950. | View product >>> |
| #902170 | Shaft throttle-brake lever Teflon coated throttle/brake lever pivot point for use with the laydown throttle servo assembly of the Serpent 950R. Comes complete with c-clip. | View product >>> |
| #902172 | Throttle slide part Small composite throttle slide part for Serpent 950R. | View product >>> |
| #902271 | Springs quick-change short (4) Set of 4 short quick release springs for use on the new dual fastening wheel axles for the 950 / 950R | View product >>> |
| #902280 | Wheel-axles front CV set Complete set of front CVDs (constant velocity drive) for the Serpent 950 / 950R. Set includes wheel axles and drive shafts and all parts required to complete the set as well as fixed wheel and quick release wheel mounting methods. | View product >>> |
| #902281 | Driveshafts front CV (2) A set of 2 ultra hard steel driveshafts for use on the 950 / 950R with the all new front CVD set. | View product >>> |
| #902282 | Insert steel CV (2) Steel inserts for use with the all new front CV set for the Serpent 950 / 950R. Comes with 2 fastening grubscrews. | View product >>> |
| #902283 | Needle 2.5 x 11.8 (4) Set of 4 steel needles for use with the optional Serpent 950/950R CVD set. | View product >>> |
| #902410 | 2-speed gearbox LC (no shaft incl) Complete LC gearbox set for use with all Serpent cars. Requires the cars respective LC gearbox shaft to be mounted. | View product >>> |
| #902411 | Drive-flange alu with owb Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping. | View product >>> |
| #902412 | Adaptor 2-speed LC Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing. | View product >>> |
| #902413 | Carrier 2nd Gear LC Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox. | View product >>> |
| #902416 | 2-speed shoe-set LC II A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only. | View product >>> |
| #902420 | Roller pin steel 5X5 (2) A pair of steel roller pins for use in the LC gearbox. Replaced by 110202 Pin 5x5 (10) | View product >>> |
| #902421 | Needle 3x13.8 (4) Set of 4 Roll pins for use with the new LC Gearbox 2 speed adapter. Replaced by 110203 Pin 3x14 (10) | View product >>> |
| #902445 | 2-speed gear 45T (2ND) LC Composite 45T 2nd gear for use with new LC Gearbox. | View product >>> |
| #902448 | 2-speed gear 48T (1ST) LC 48T composite 1st gear for new LC gearbox. | View product >>> |
| #903102 | Radio plate S966 Carbon fibre radio plate for the Serpent 966. | View product >>> |
| #903106 | Wishbone FR UP L Front upper left composite wishbone for the Serpent 960. | View product >>> |
| #903107 | Wishbone FR UP R Front upper right composite wishbone for the Serpent 960. | View product >>> |
| #903110 | Shocktower carbon FR S960 Carbon fibre front shock tower for the Serpent 960. | View product >>> |
| #903111 | Bodyplate FR Front composite body mount plate for the Serpent 960. | View product >>> |
| #903112 | Brake eccenter alu Coated aluminium brake cam for use on the Serpent 960. | View product >>> |
| #903114 | Bearingblock RR Right Composite lower rear right bearing block for the Serpent 960. | View product >>> |
| #903115 | Brake support plate carbon Carbon fibre brake support plate for the Serpent 960. | View product >>> |
| #903116 | Shaft 2-speed 2-Speed shaft for Serpent 960 series of cars. | View product >>> |
| #903117 | Stiffener RR carbon Carbon fibre stiffener for the rear of the Serpent 960. | View product >>> |
| #903118 | Eccenter RR (2) Set of 2 composite bearing eccenters for the rear of the Serpent 960 | View product >>> |
| #903119 | Susp bracket RR L Rear upper left composite suspension bracket for the Serpent 960. | View product >>> |
| #903120 | Susp bracket RR R Rear upper right composite suspension bracket for the Serpent 960. | View product >>> |
| #903121 | Pivot insert nylon (4+4+4) Complete set of rear pivot pin inserts for the Serpent 960. | View product >>> |
| #903122 | Rear plate S960 Composite rear plate of the Serpent 960. | View product >>> |
| #903128 | Throttle brake-lever Composite throttle brake lever for the Serpent 960. | View product >>> |
| #903129 | Spacer swaybar RR Pair of aluminium spacers for use with the adjustable rear anti-roll bar on the Serpent 960. Comes complete with 2 grubscrews. | View product >>> |
| #903130 | Bodymount RR Rear composite bodymount. | View product >>> |
| #903133 | Sideplate R carbon Right carbon fibre side plate for the Serpent 960. | View product >>> |
| #903134 | Bracket throttle-brake servo Composite throttle brake servo mount with pivot point for lay down configuration. Suitable for the Serpent 960. | View product >>> |
| #903135 | Mount-supports servo Full set of servo mount supports. | View product >>> |
| #903136 | Shim 3.1x8x5 nylon (2) Pair of white nylon spacers for use under the fueltank mounts on the Serpent 960. | View product >>> |
| #903138 | Servo saver lever 23T Composite servo saver lever with 23T. Suitable for use with Sanwa, KO & JR servos. | View product >>> |
| #903139 | Servo saver lever 24T Composite servo saver lever with 24T. Suitable for use with Hitec servos. | View product >>> |
| #903140 | Servo saver lever 25T Composite servo saver lever with 23T. Suitable for use with Futaba servos. | View product >>> |
| #903141 | Battery-support plate S960 Carbon battery mounting plate for the Serpent 960. | View product >>> |
| #903147 | Instruction Manual S960 Full Colour Instruction manual for the Serpent 960. | View product >>> |
| #903148 | Reference guide S960 Full Colour Reference guide for the Serpent 960. | View product >>> |
| #903149 | Setup booklet S960 Full colour Setup booklet for the Serpent 960. | View product >>> |
| #903150 | Decal S960 Serpent 960 A5 decalsheet in Orange, black and white and A4 Serpent decalsheet with SPP logos in black, white and Orange. Fuel resistant. | View product >>> |
| #903151 | Decal S960 A5 Serpent 960 A5 decalsheet in Orange, black and white. Fuel resistant. | View product >>> |
| #903156 | Driveshaft rear 62mm (2) Pair of 2 Hudy spring steel driveshafts for the rear of the Serpent 960. | View product >>> |
| #903157 | Receiver bracket 710/960 Composite receiver bracket for the Serpent 710 and 960. | View product >>> |
| #903161 | Susp bracket alu FR upper (2) Optional aluminium upper front suspension brackets. Comes supplied with composite inserts and grub screws. Suitable for the Serpent 960. | View product >>> |
| #903164 | Shock-set RCC front (2) Complete pre assembled short RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touring cars. | View product >>> |
| #903165 | Shock-set RCC long (2) Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
| #903166 | Shock rod short (2) A set of 2 short shock rods for use in RCC shocks. | View product >>> |
| #903167 | Shock rod long (2) A set of 2 long shock rods for use in RCC shocks. | View product >>> |
| #903168 | Nylon parts frame shocks RCC Complete set (4) of composite RCC shock absorber components. | View product >>> |
| #903169 | Insert shock (2) A set of 2 RCC composite shock absorber inserts. New: Use 903336 and 903332 instead | View product >>> |
| #903171 | O-ring 10x1 (4) Set of 4 o-rings for use in the RCC shock absorbers. | View product >>> |
| #903175 | Foam insert (4) Set of 4 foam inserts for use in the RCC shock absorbers. | View product >>> |
| #903177 | Nut shock alu (2) Set of 2 anodised aluminium shock absorber nuts. Suitable for the RCC shock absorbers. | View product >>> |
| #903178 | Body alu shock FR (2) A pair of front aluminium RCC shock bodies. | View product >>> |
| #903179 | Body alu shock RR (2) A pair of rear aluminium RCC shock bodies. | View product >>> |
| #903186 | C + G Clip + washer RCC shocks (12) Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks. | View product >>> |
| #903197 | Steering Servo mount V2 Composite steering servo mount for the Serpent 960. Features two mounting holes for attaching the option transponder holder (#1666) | View product >>> |
| #903200 | O-ring 3.3 x 1.5 RCC shocks (10) Set of 10 purple o-rings for use in the RCC shock absorbers. | View product >>> |
| #903212 | Centax support disk alu SPP Aluminium support disk for use in the Centax and Centax II. | View product >>> |
| #903224 | Gear Pinion set 1/8 (6) Pinion gear set for the Centax-2. Contains 1 x 15T, 1 x 16T, 1 x 17T, 1 x 18T, 1 x 19T & 1 x 20T | View product >>> |
| #903228 | Bearing block RR left V2 New rear left bearing block for the Serpent 960. Features extra stiffening ribs along with an additional mounting hole to completely reduce flex around the pulley side of the gearbox shaft. | View product >>> |
| #903229 | Rear 51T pulley with clip Rear 51T pulley with clip | View product >>> |
| #903230 | Ball joints 5.8mm frame Set of twenty 5.8mm composite ball joints. | View product >>> |
| #903231 | Ball joints set 14+6+2 Set of composite ball joints that includes 14 x 6mm ball joints, 6 x shorter shock end ball joints and 2 x 4mm ball joints. The balljoints feature a text with TOP to indicate right position to press in the ball, for perfect fit. | View product >>> |
| #903233 | Steering block WOS (2) Pair of wide offset (WOS) steering blocks for the Serpent 960. | View product >>> |
| #903235 | Shim 12x15x0.25 (10) Shim 12x15x0.25 (10) | View product >>> |
| #903236 | Rear Shock tower V2 Carbon fibre rear shock tower V2. | View product >>> |
| #903237 | Anti-roll bar blade RR soft (2) Pair of soft rear anti roll bar blades. | View product >>> |
| #903250 | Pivot ball 8.5mm/27.7mm (2) Pair of steel 8.5mm/27.7mm pivot balls. | View product >>> |
| #903256 | Rear upright OS1 (2) Pair of rear OS1 uprights. | View product >>> |
| #903258 | Rear upper wishbone (2) Pair of rear upper wishbones. | View product >>> |
| #903259 | Rear Lower wishbones (2) Pair of rear lower wishbones. | View product >>> |
| #903260 | Rear body mount arm long Pair of rear long body mount arms. | View product >>> |
| #903261 | Front Lower wishbones (2) Pair of front lower wishbones. | View product >>> |
| #903262 | Anti roll bar levers FR (2) Set of front anti roll bar levers. | View product >>> |
| #903263 | Track-rod with hole 22mm (2) Pair of 22mm track rods for use in the rear upper wishbones. | View product >>> |
| #903264 | Bearing block FR left 08 Front left 08 bearing block. | View product >>> |
| #903265 | Bearing block FR right 08 Front right 08 bearing block. | View product >>> |
| #903266 | Wheel-axles CVD FR OS2 (2) Wheel-axles CVD FR OS2 (2) | View product >>> |
| #903268 | Wheel axle Rear OS2 (2) Pair of rear OS2 wheel axles. | View product >>> |
| #903270 | Spring QC OS2 Rear (2) Pair of steel quick release springs for rear OS2 wheel axles. | View product >>> |
| #903272 | Pivot Pin 3x82 Pivot Pin 3x82 | View product >>> |
| #903273 | Ball 6.8mm steel (2) Pair of steel 6.8mm pivot balls. | View product >>> |
| #903274 | Chassis plate 960 LCG 08 CNC machined 5mm thick 08 chassis plate. | View product >>> |
| #903277 | Washer M4 conical Alu (4) Set of 4 aluminium conical washers. | View product >>> |
| #903278 | Tank 125cc with AFL cap & Seal New generation 125cc fuel tank with AFL lid and shaped rubber seal. Supplied with 50cm length of clear fuel tubing, as well as fuel nipples and grub screw for AFL lid. | View product >>> |
| #903279 | Solid rear axle & clip Rear solid axle supplied with clip. | View product >>> |
| #903280 | Conversion Brake pulley adaptor V2 V2 brake pulley adaptor conversion set. | View product >>> |
| #903281 | Brake pulley 22T V2 Composite 22T brake pulley for 960-08 brake system V2. | View product >>> |
| #903282 | Brake pulley adaptor V2 V2 brake pulley adaptor with grub screw. | View product >>> |
| #903283 | Retainer brake pulley V2 V2 aluminium brake pulley retainer with screws. | View product >>> |
| #903284 | Suspension set nylon FR 960-08 Complete replacement set of 960-08 front suspension parts that includes 2 x lower wishbones, 2 x upper wishbones, 2 x steering blocks, body mount and bumper. | View product >>> |
| #903285 | Suspension set Nylon rear OS1 Rear OS1 nylon suspension set that includes 2 x rear uprights, 2 x rear lower wishbones and 2 x rear upper wishbones. | View product >>> |
| #903330 | Brakeplate and pad set Brakeplate and pad set | View product >>> |
| #903333 | X-ring RCC 2009 Shock (10) X-Ring for the 2009 RCC Shock | View product >>> |
| #903334 | Shock-set RCC-X short (2) Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
| #903335 | Shock-set RCC-X long (2) Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars. | View product >>> |
| #903336 | 903336 Insert RCC 2009 shock (2) Shock bottom for the X-Ring for the 2009 RCC shock | View product >>> |
| #903389 | Fueltank 125cc 1/8 on-road Fueltank 125cc 1/8 on-road with an new design fuel cap. | View product >>> |
| #909216 | Adjustable front anti-roll bar blade (male) Adjustable front anti-roll bar blade with ball (male). For Vector all Specs. | View product >>> |
| #909217 | Adjustable front anti-roll bar blade (female) Adjustable front anti-roll bar blade, female part. For Vector all Specs. | View product >>> |
| #909224 | Wheel axle shims (2) Set of 2 shims 12x18x0.3mm to protect wheel axle bearings. | View product >>> |
| #909225 | Oneway front axle Vector Alu. front axle for Vector all Specs, with 1-way bearings pressed in. Use only Serpent One-Way Lube 1680 to lubricate the one-way bearings. | View product >>> |
| #909236 | Pulley / flange 16t Pulley 16T for middle shaft (center). For Vector all Specs. | View product >>> |
| #909238 | Pulley / flange 18t Pulley 18T for 2-speed shaft (side). For Vector all Specs. | View product >>> |
| #909244 | Pulley / flange 24t Optional pulley 24T for middle shaft (side). For Vector all Specs. | View product >>> |
| #909245 | Pulley / flange 25t Pulley 25T for middle shaft (center). For Vector all Specs. | View product >>> |
| #909250 | Pulley adaptor alu. (2) Pulley adapter for middle shaft pulleys. For Vector all Specs. | View product >>> |
| #909325 | Q-change levers rear alu. (2) Alu. quick-change levers for rear wheel axles 909322. Fit Vector all Specs. | View product >>> |
| #909373 | Drive-belt Kevlar 8mm Kevlar reinforced timingbelt for rear transmission of Vector all Specs. Width 8mm. | View product >>> |
| #909404 | Spring-support washers (4) Set of four spring support washers. | View product >>> |
| #909510 | Centax-II clutch-set (excl. Flywheel) Complete Centax-II clutch set with everything needed to mount it to your engine with the exception of the flywheel. All bearings, shoes, shims and a bell housing with a 16/19 gear ratio is supplied. | View product >>> |
| #909512 | Centax-II clutch-housing universal Ultra strong spring steel Centax-II clutch bell housing. | View product >>> |
| #909514 | Centax II bearing spacer 5x7 Aluminium spacer for use in the Centax-II clutch system. | View product >>> |
| #909515 | Centax II centrifugal shoes (3) A set of 3 carbon flyweights for use in both Centax-I & II clutch systems. | View product >>> |
| #909516 | Centax II Spacer Thrustbearing Sapcer for use with Centax-II clutch system. Comes complete with screw. | View product >>> |
| #909518 | Centax coilspring 1.8 1.8mm diameter spring steel coil spring for use with the Centax-I and Centax-II clutch systems for use with 3.5cc/.21 engines. A softer version is also available (#6586). Replaced by #909520 | View product >>> |
| #909519 | Centax II shims 5 x 10 x 0.3 (2) + 0.5 (1) Set of 3 Centax-II shims in two sizes 0.3 (2) and 0.5 (1). | View product >>> |
| #909556 | Centax gear-pinion alu. 16t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909559 | Centax gear-pinion alu. 19t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #9212 | Inner driveshaft adapter Inner drive shaft adapter, spring steel, for Excel, Vector, 950, 950R, 960 all Specs. | View product >>> |
| #9226 | Alu. lever quick-change system | View product >>> |
| #9606 | Brake disk steel ventilated (2) Steel brake disk with 6 cooling-sleeves for optimal ventilation of the disks. Set of 2 pieces. Use part #9612 as an additional cooling aid between the Brake disks. | View product >>> |
| #9612 | Special ventilated brake-disc Alu. spacer to created vented disc brake. For all Excel and Vector versions. | View product >>> |
| #9619 | Alu. pulley adapter 19t MK-2 Alu. pulley adapter for side pulley on 2-speed shaft, for all Impact and Vector versions. | View product >>> |
News