> Serpent 966 -TE v2 1/8 scale 4WD (#903011)
- Brand:
- Serpent
Product Type:- Gas Cars > 1/8
Serpent 1/8 scale 4wd gaspowered racing car chassis in the Team edition v2. Main news for the 966 - TE Team Edition V2 - Centax True Motion clutch system - RCM shocks The Serpent 966-TE already included: - SL8 gearbox included, for lower inertia - front aero bumper - split-type carbon radioplate with flex-control, and front stiffner/support - new front upper geometry with inner pivots more out and shorter upper arms, for more corner entry grip and more corner speed - new rear upper geometry wth new camber-bracket, and upper camber-rods instead wishbone - rear lower shockmounts/extenders in carbon, for new shock-angle
Related products
View: Text | Images
> Optional parts
| #1015 | Torx engine mount screws/washers Engine mounting screws for Impact and Vector. TORX head allows for higher torque to be applied to the screws, adding extra reliability. TORX-wrench 1014 required. Size M5x12. Countersunk alu. washers included. | View product >>> |
| #1017 | Screws engine mount + flange (4) Special steel engine mounting screws, allen type. Integrated washer for easy assembly. | View product >>> |
| #1388 | Thrust bearing 5x10 Ceramic 5x10 thrust bearing with ceramic balls. Ligther and more durable with perfect run-ways. A direct replacement for the standard thurst-bearing, to be used in Centax-3 clutch system. | View product >>> |
| #1462 | Centax Nut & Pressure Nipple Tool Handy composite tool for adjusting the Centax clutch nut and for the mounting the fuel line nipples. | View product >>> |
| #1595 | Exhaust wire mount Aluminum exhaust wire mount for Serpent 950. Comes with grubscrew. | View product >>> |
| #160109 | Shock RCM bushing machined (8) Shock RCM bushing machined (8) Can be used instead of the moulded bushings (#160108) , for more precise shockaction. | View product >>> |
| #160115 | Shock RCM shaft short tin coated (2) Shock RCM shaft short tin coated (2) | View product >>> |
| #160116 | Shock RCM shaft long tin coated (2) Shock RCM shaft long tin coated (2) | View product >>> |
| #160117 | Shock piston RCM machined 1-hole (4) Shock piston RCM machined 1-hole (4) | View product >>> |
| #160118 | Shock piston RCM machined 2-hole (4) Shock piston RCM machined 2-hole (4) | View product >>> |
| #160119 | Shock piston RCM machined 3-hole (4) Shock piston RCM machined 3-hole (4) | View product >>> |
| #160120 | Shock piston RCM machined 4-hole (4) Shock piston RCM machined 4-hole (4) | View product >>> |
| #160300 | Spring white L23 (2.3/13) (2) Pair of 23mm long white springs (2.3/13). | View product >>> |
| #160301 | Spring yellow L23 (2.8/16) (2) Pair of 23mm long yellow springs (2.8/16). | View product >>> |
| #160302 | Spring orange L23 (3.4/19.5) (2) Pair of 23mm long orange springs (3.4/19.5). | View product >>> |
| #160303 | Spring red L23 (4.1/23.5) (2) Pair of 23mm long red springs (4.1/23.5). | View product >>> |
| #160304 | Spring pink L23 (4.9/28) (2) Pair of 23mm long pink springs (4.9/28). | View product >>> |
| #160305 | Spring blue L23 (5.8/33) (2) Pair of 23mm long blue springs (5.8/33). | View product >>> |
| #160307 | Spring green L23 (8/45.5) (2) Pair of 23mm long green springs (8/45.5). | View product >>> |
| #160308 | Spring grey L23 (9/51.5) (2) Pair of 23mm long grey springs (9/51.5). | View product >>> |
| #160309 | Spring black L23 (10/57) (2) Pair of 23mm long black springs (10/57). | View product >>> |
| #160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
| #160324 | Spring pink L27 (4.9/28) (2) Pair of 27mm long pink springs (4.9/28). | View product >>> |
| #160325 | Spring blue L27 (5.8/33) (2) Pair of 27mm long blue springs (5.8/33). | View product >>> |
| #160326 | Spring purple L27 (6.8/39) (2) Pair of 27mm long purple springs (6.8/39). | View product >>> |
| #160327 | Spring green L27 (8/45.5) (2) Pair of 27mm long green springs (8/45.5). | View product >>> |
| #160328 | Spring grey L27 (8/45.5) (2) Pair of 27mm long grey springs (8/45.5). | View product >>> |
| #160329 | Spring black L27 (10/57) (2) Pair of 27mm long black springs (10/57). | View product >>> |
| #160330 | Spring set L27 (5) Set of 5 pairs of 27mm long shock absorber springs. The set includes red, purple, green, pink and blue springs. | View product >>> |
| #1887 | Decal sheet 1/8 black-white (2) High quality decal-sheet size 30x20cm. Serpent logo's. To apply to bodies. | View product >>> |
| #1889 | Decal-sheet 1/8 chrome (2) High quality decal-sheet size 30x20cm. Chrome version. Serpent logo's. To apply to 1/8 scale bodies. | View product >>> |
| #190546 | Serpent high speed fuel gun Serpent high speed fuel gun | View product >>> |
| #600157 | Collar double (2) Collar double (2) | View product >>> |
| #600484 | Antirollbar spacer 3mm alu (2) Antirollbar spacer 3mm alu (2) | View product >>> |
| #6123A | Body posts aluminium short (2) ( use 903502) Aluminium body posts for Serpent chassis'. Comes in a pack of 2 with the mounting screws and a pair of body clips. Replaced by 903502. | View product >>> |
| #801159 | Spacer Fuel-tank Capacity (5) Set of 5 spacers and two screws to allow you to adjust the capacity of your fuel tank. | View product >>> |
| #803169 | Adjustable rear anti-roll bar soft Aluminium soft rear anti-roll bar. Suitable for Serpent 1/8th scale chassis and 720. Comes complete with 2 grubscrews. | View product >>> |
| #803204 | Anti-Roll bar blade FR soft set Pair of soft anti roll bar blades. | View product >>> |
| #804146 | Shim conical 3x2mm (4) Shim conical 3x2mm (4), to used as roll-center spacer, on top of the up-right. Orange anodised. Works in 1/8 and 1/10 scale. | View product >>> |
| #804214 | Steering lever 23T alu Steering lever 23T alu | View product >>> |
| #804215 | Steering lever 24T alu Steering lever 24T alu | View product >>> |
| #804216 | Steering lever 25T alu Steering lever 25T alu | View product >>> |
| #804252 | Pivotball 5.8mm alu coated (4) Pivotball 5.8mm alu coated (4) with hexagon. | View product >>> |
| #804254 | Anti-roll bar ball 3.0mm alu (2) Anti-roll bar ball 3.0mm alu (2) | View product >>> |
| #804291 | Brake lever on-road alu Brake lever on-road alu for Serpent 1/10 and 1/8. | View product >>> |
| #804302 | Weight set round 4 x 5gram Brass weight set round 4 x 5gram with hardware. Precision weights, black anodised, with weight engraved. Made for 747 but can be used in any car. | View product >>> |
| #902129 | Turnbuckle 65mm titanium (2) High quality machined Titanium track-rods (lightweight and very durable) to use on 1/8 scale racing cars. Complete with 6mm ball-joints. Can be used as replacement for the original track-rods. | View product >>> |
| #902156 | Radioplate bracket aluminum S-950 Aluminum radio plate bracket for mounting the Serpent 950/960/966 radio plate. Comes with fastening material. | View product >>> |
| #902253 | Middle Shaft alu coated Coated lightweight aluminium middle shaft. | View product >>> |
| #902254 | Middle shaft steel light SPP Spring steel, lightweight middle shaft for 1/8 scale chassis'. | View product >>> |
| #902270 | Wheel-axles front QC-fixed set Front wheel axle set, including 2 high quality lightweight axles, wheels nuts, quick release springs, alu spacers and o-rings. | View product >>> |
| #902284 | Spacer alu Steeringblock (2) A pair of aluminium spacers to be mounted on the front wheel axle between the main bearings in the steering block. | View product >>> |
| #902370 | Wheel-axles rear QC-fixed set Rear wheel axle set, including 2 high quality lightweight axles, wheels nuts, quick release springs, alu spacers and o-rings. | View product >>> |
| #903121 | Pivot insert nylon (4+4+4) Complete set of rear pivot pin inserts for the Serpent 960. | View product >>> |
| #903127 | Anti-roll bar rear adjustable Anti-roll bar rear adjustable complete | View product >>> |
| #903143 | Roll center spacer 1mm carbon Set of 6 roll centre spacers. 1mm in thickness they are suitable for use under the front suspension brackets of the Serpent 960 to adjust roll center. | View product >>> |
| #903160 | Eccenter bearing alu (2) Pair of aluminium bearing eccenters for use on the front and rear axles bearings on the Serpent 960. | View product >>> |
| #903161 | Susp bracket alu FR upper (2) Optional aluminium upper front suspension brackets. Comes supplied with composite inserts and grub screws. Suitable for the Serpent 960. | View product >>> |
| #903185 | Shim 4x9x1 RCS (12) A package of 12 shims, sized 4 x 9 x 1mm. | View product >>> |
| #903187 | Eccenter frame for Upper bracket alu Set of 4 composite pivot pin inserts for the optional aluminum upper front suspension bracket. | View product >>> |
| #903189 | Middle Bracket set alu S960 / 950 Middle bracket set consisting of aluminium middle bracket, aluminium middle shaft, 2 lightweight pulley adaptors and 2 bearings. The set comes with the required fastening material. | View product >>> |
| #903190 | Support set carbon body support RR Carbon set for rear body mount support. Includes carbon plate and 2 aluminium spacers. | View product >>> |
| #903193 | Filler-plate carbon for LCG chassis Carbon filler plate, to be used only with the optional LCG chassis for the Serpent 960. | View product >>> |
| #903195 | Battery-plate carbon closed Carbon fibre battery plate for the Serpent 960. | View product >>> |
| #903196 | Carbon transponder holder & mount Set S960 Carbon transponder holder made and Steering servo mount for the Serpent 960. Comes with all the necessary fasteners. | View product >>> |
| #903199 | Centax flyweights PTFE machined for .21 Complete set of 3 flyweights for use in the Centax clutch system for .21 engines. | View product >>> |
| #903202 | RCC shock absorber tool Anodised aluminium tool to aid correct assembly of the RCC shock absorber. | View product >>> |
| #903203 | Lever throttle brake alu w bearings Aluminium throttle brake lever set for use with the laydown servo configuration of the Serpent 950, 950R and 960. Comes complete with bearings and alu spacer. | View product >>> |
| #903204 | Mono engine mount brass 960/966 Mono-engine mount in brass, precision CNC machined. Adds extra weight in very low and central area of the 966 car. Good heat-transfer too. Weight: brass: 80 grams Weight alu : 28 grams | View product >>> |
| #903219 | Centax-II clutch set PRO Centax II clutch set PRO that features many optionals in place of the standard items that come with the regular Centax II set. | View product >>> |
| #903222 | Centax-2 revision set This Centax 2 revision set contains clutch plate, yellow clutch shoe, flyweights, main bearings and ceramic thrust bearing. | View product >>> |
| #903226 | Shock rod RCC short Ti-Ni (2) Pair of short Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903227 | Shock rod RCC long Ti-Ni (2) Pair of long Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903232 | Spring Support alu light (4) Set of 4 lightweight aluminium spring supports for Serpent shock absorbers. | View product >>> |
| #903234 | Steering block WOS L+R Pro set Wide offset (WOS) steering block Pro Set that includes 2 steering blocks, bearing eccenters, ceramic bearings, spacers and nylon pivot ball nuts. | View product >>> |
| #903239 | Centax-2 clutch shoe red Red clutch shoe for Centax-II. | View product >>> |
| #903240 | Spring Cup nylon ISL (4) Set of 4 spring cups for Serpent shock absorbers that raises the spring height on the shaft by 2mm. | View product >>> |
| #903241 | Battery holder brass 960 Brass battery holder for the 960. | View product >>> |
| #903251 | Ventilated brake disc 1/8th Ventilated single piece brake disc for use on the Serpent 960 and older 1/8th scale chassis'. | View product >>> |
| #903287 | Shim wheel axle small conical (4) Set of 4 small diameter conical wheel axle shims. | View product >>> |
| #903293 | Balance weight central brass 50g For Serpent 960-08 Balance weight central brass 50g This weight is mainly used in combination with Lipo receiver-pack, to balance out the weight. | View product >>> |
| #903298 | Belt 80S3M210 Low Friction 903298 Belt 80S3M210 Low Friction | View product >>> |
| #903299 | Belt 60S3M432 Low Friction Belt 60S3M432 Low Friction | View product >>> |
| #903300 | Belt 60S3M201 Low Friction Belt 60S3M201 Low Friction | View product >>> |
| #903301 | Belt Set Low Friction 960 / 966 Set Low Friction belts for 960 / 966. Front, side and rear belt. | View product >>> |
| #903337 | Antirollbar set 966 RR (3) Antirollbar set 966 RR (3) Set of rear wire antirollbars (2.2mm - 2.5mm - 2.7mm) with balls and spacers. | View product >>> |
| #903338 | Antirollbar 966 RR 2,2mm Antirollbar 966 RR 2,2mm | View product >>> |
| #903339 | Antirolbar 966 RR 2,5mm Antirolbar 966 RR 2,5mm | View product >>> |
| #903340 | Antirollbar 966 RR 2,8mm Antirollbar 966 RR 2,8mm | View product >>> |
| #903341 | Antirollbar ball 3mm (2) Antirollbar ball 3mm (2) | View product >>> |
| #903342 | Antirollbar ball 2,5mm (2) Antirollbar ball 2,5mm (2) | View product >>> |
| #903343 | Antirollbar spacer 3mm (2) Antirollbar spacer 3mm (2) | View product >>> |
| #903344 | Antirollbar spacer 2.5mm (2) Antirollbar spacer 2.5mm (2) | View product >>> |
| #903345 | Central rear stiffner 966 set Central rear stiffner. Made of precision machined high grade alu, anodised. Connect the rear axle brackets with the 2-speed brackets. Reduces rear end flex. | View product >>> |
| #903346 | Screws for central rear stiffner Screws for central rear stiffner. Special size, special steel. | View product >>> |
| #903348 | Pulley alu 16T anodized Pulley alu 16T hard-anodized for the 960 and 966 with engraved tooth number. Comes complete with grub-screw. Lower friction alu pulley, and less dust and dirt will attach to the metal, keeping a smooth drivetrain. | View product >>> |
| #903349 | Pulley alu 18T hard anodized Pulley alu 18T hard anodized | View product >>> |
| #903350 | Pulley alu 25T anodized Pulley alu 25T hard-anodized for the 960 and 966 with engraved tooth number. Comes complete with grub-screw. Lower friction alu pulley, and less dust and dirt will attach to the metal, keeping a smooth drivetrain. | View product >>> |
| #903351 | Upright 966 W2 (wide offset) (2) Upright 966 W2 (wide offset) (2) More steering in corner entry and faster/easier hairpin rotation. Superstrong wide offset uprights for Serpent 966. Direct replacement for standard upright, no mods needed. OS2 version only. | View product >>> |
| #903353 | Decal-sheet 966 chrome (2) Decal-sheet for Serpent 966. High quality, very thin and strong material. Chrome. Fuel-proof. 2 pieces per bag. | View product >>> |
| #903355 | Set screw M4 to M3x8 (2) special made setscrew-allen M4 to M3x8 (2) For Flex-link 903354 | View product >>> |
| #903357 | Connectorset rear 966 (2+2) Connectorset rear 966 (2+2) Set of 2 rubber and 2 alu connectors with spacers and screws as needed. Use together with 903358. | View product >>> |
| #903358 | Upgrade-set rear end 966 V2 Upgrade-set rear end 966 V2 New rear end parts enable connecting rear end and 2-speed brackets with rubber or aluminium connectors, for more or less flex. Delrin bushings are included to seat the anti-roll bar bearings and 2-speed axle bearings. | View product >>> |
| #903359 | Anti-roll bar-set front alu 960/966 Anti-roll bar-set front alu 960/966. Precision CNC machined anti-roll bar holders and eccenters, in aerospace quality aluminium with grey anodising. | View product >>> |
| #903365 | 2-Speed gearbox spacer (3) 2-Speed gearbox spacer (3) | View product >>> |
| #903378 | Wheelaxle front OS2 Alu (2) Wheelaxle front OS2 Alu (2) Super light-weight front wheel-axles for Serpent 960 / 966. CNC machined from aerospace quality aluminium and hardcoated. Perfect bearing fit. 70% lighter than steel. | View product >>> |
| #903386 | Chassis 966 hard coated CNC machined 7075 T6 aerospace aluminum in hard anodized version. Countersunk holes, chamfered edges, knife-edge pockets under the engine for extra cooling, recessed pockets for flex-plates. | View product >>> |
| #903387 | Clutch housing centax 2 alu Clutch housing centax 2 alu Precision machined Centax-2 clutch-housing in special grade aluminum to create extra grip for the clutch-shoes. Perfect threading to mount the hardcoated alu gear-pinions. 70% lighter than the steel version. Best used with 6587-XP black clutch shoe. | View product >>> |
| #903388 | Servo saver top + bottom alu (2) Servo saver top + bottom alu (2) version with adjustable ackermann, with insert plates. o, +1.25 or +1.25 | View product >>> |
| #903390 | Centax set Ultra 1/8 Centax-2 set Ultra 1/8 Complete Centax clutch-set for 1/8 scale 966 , with alu clutchbell, XP clutch shoe and machined carbon flyweights. Lighter and more punch. Assembly and set-up same as Centax-2. | View product >>> |
| #903391 | Wheel-axle set CVD RR (2) Wheel-axle set CVD RR (2) Top-quality spring steel, precision machined, and grinded. Creates more rear end grip. | View product >>> |
| #903392 | Wheel-axle CVD RR (2) Rear wheelaxle cvd (2) | View product >>> |
| #903393 | Rear driveshaft cvd (2) Rear driveshaft cvd (2) | View product >>> |
| #903396 | Pivot-balls 8.5mm TiN coated titanium (8) Pivot-balls 8.5mm TiN coated titanium (8) 2.2 grams each. | View product >>> |
| #903397 | Centax True Motion clutch set 1/8 Centax True Motion clutch set 1/8 | View product >>> |
| #903398 | Rear wheelaxle cvd alu (2) Rear wheelaxle cvd coated alu (2) | View product >>> |
| #903402 | Body post aluminium short (2) Body post aluminium short (2) | View product >>> |
| #903502 | Body post alu eccentric short (2) Body post alu eccentric short (2) Allows to move the body few mm back or forward due to eccentric shape. | View product >>> |
| #903601 | Driveshaft cvd FR alu (2) Driveshaft cvd FR alu (2) | View product >>> |
| #903618 | Aero bumper inserts L+R 977 Aero bumper inserts L+R 977 | View product >>> |
| #903651 | Inner driveshaft adapter light Inner driveshaft adapter light | View product >>> |
| #903663 | Bumper 1/8 FLOW Bumper 1/8 FLOW with seperate inserts | View product >>> |
| #903856 | Belt 60S3M432 MBL competition S9XX Belt 60S3M432 MBL competition S9XX | View product >>> |
| #904100 | Conversionset 966-E Conversion-set 966-E. Enables to convert from Serpent 960 or 966 to an electric version. Includes no electronics. | View product >>> |
| #909223 | Wheel-axle front WOS + spacer (2) WOS (Wide-of-stand) wheel axles, made from heat-treated steel for extra rigidity and strength. Comes complete with shims. | View product >>> |
| #909228 | Wheel-axle shim steel conical (4) Special hardened conical support washers for the wheel axles. These shims are mounted on the front and rear wheel axles to give better support to the inside of the wheels. These shims are required when using fixed wheel adapters 909328. | View product >>> |
| #909244 | Pulley / flange 24t Optional pulley 24T for middle shaft (side). For Vector all Specs. | View product >>> |
| #909251 | Pulley-adaptor alu light (2) Set of 2 lightweight pulley adaptors for use with the 1/8th scale range of cars. Comes with mounting grubscrews. | View product >>> |
| #909253 | Pulley 16T alu H-anodised Lightweight aluminium 16T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909254 | Pulley 18T alu H-anodised Lightweight aluminium 18T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909255 | Pulley 24T alu H-anodised Lightweight aluminium 24T pulley. For use with Serpent 1/8th scale | View product >>> |
| #909513 | Centax II Clutch Housing Light Ultra lightweight Centax-II Clutch bell. Made from coated high tensile steel. | View product >>> |
| #909555 | Centax gear-pinion alu 15t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909556 | Centax gear-pinion alu. 16t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909557 | Centax gear-pinion alu. 17t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909558 | Centax gear-pinion alu. 18t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909559 | Centax gear-pinion alu. 19t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909560 | Centax gear-pinion alu. 20t Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability. | View product >>> |
| #909590 | Gear-pinion wrench Special tool to mount pinions on Centax clutch housing. Fits 15-16-17-18-19-20T pinions. Made of durable composite nylon. | View product >>> |
News