> 1/8 · Formula · 1/8 offroad · 1/10 200mm · 1/10 235mm

> Serpent F180 kit (#300000) - DISCONTINUED

> Description · News (19) · Specifications · Images (32) · Downloads (4) · Spares (135) · Optionals (5)

Serpent F180 Kit 2wd
Brand:
Serpent

Product Type:
Gas Cars > Formula

1/8th scale Serpent F180 kit. This kit is supplied in a high quality carry case and comes with the exhaust system and body shell.

Related products


View: Text | Images

> Spare parts

#1070Grommet rubber soft (4)
High quality rubber grommets to be used for fueltank-mounting, servo supports and similar purposes.
View product >>>
#1092Shims 18x12x0.3 (10)
View product >>>
#1111Pin NRA 3x13.8 (4)
Set of 4 steel pins size 3x13.8mm
View product >>>
#1115Pin NRA 5x5 (4)
Set of 4 steel pins size 5x5mm
View product >>>
#1493Pressure nipple M3 (4)
View product >>>
#1637Universal adjustable brake-set
View product >>>
#1650Pivotball 5.8mm (4)
Pivotball 5.8mm (4)
View product >>>
#301004Chassis plate 7075 T6
Anodised chassis plate for Serpent F180. Made from high grade 7075 T6 aluminium.
View product >>>
#301005Top deck carbon
Carbon fibre top deck.
View product >>>
#301008Battery pack
5 cell battery pack.
View product >>>
#301009Pipe mount wire
Exhaust pipe mounting wire.
View product >>>
#301010Front Wing Nylon Black
Nylon front wing for the Serpent F180.
View product >>>
#301012Front Suspension set Nylon
Front Suspension set for F180. Contains 2 lower front wishbones, 2 upper front wishbones and 2 steering blocks.
View product >>>
#301013Front Wishbone set (2+2)
Complete front wishbone set, includes 2 front upper wishbones and 2 front lower wishbones.
View product >>>
#301014Steering Block L+R
Set of left and right composite steering blocks.
View product >>>
#301015Drive shaft Front (2)
A pair of front drive shafts for the Serpent F180.
View product >>>
#301016Wheel axle Front (2)
A pair of front wheel axles.
View product >>>
#301017Wheel Nut (4)
A set of 4 aluminium wheel nuts.
View product >>>
#301019Central front bracket alu
Machined and anodised aluminium front central bracket for Serpent F180.
View product >>>
#301022Anti-roll bar shaft front
Front aluminium anti-roll bar shaft.
View product >>>
#301023Anti-Roll bar adaptors alu (2)
A pair of aluminium front Anti-Roll bar adaptors.
View product >>>
#301024Pushrod rocker alu (2)
A pair of aluminium pushrod rockers.
View product >>>
#301027Shock bracket nylon front lower
Front lower nylon shock bracket.
View product >>>
#301028Steering servo lever 23T/24T/25T
Steering servo levers for different Servo types 23T/24T/25T
View product >>>
#301029Shock bracket nylon front upper
Front upper nylon shock bracket.
View product >>>
#301030Brake cup FR steel (2)
Pair of steel front brake cups.
View product >>>
#301031Brake Activator
Composite brake activator for F180.
View product >>>
#301032Brake Driver with steel pins
A pair of brake drivers with steel pins.
View product >>>
#301033Brake wire assembly
Brake wire assembly for Serpent F180.
View product >>>
#301035Central rear bracket
Machined and anodised aluminium rear central bracket for Serpent F180.
View product >>>
#301036Bearing block rear left & right
Pair of left and right rear bearing blocks.
View product >>>
#301037Suspension bracket rear left / right
Composite rear suspension brackets for left & right of Serpent F180.
View product >>>
#301038Back plate nylon
Nylon back plate.
View product >>>
#301040Wishbones Rear (2+2)
Rear wishbone set for the F180. Contains 2 lower rear wishbones and 2 upper rear wishbones.
View product >>>
#301041Pivot pins upper (4)
A set of 4 upper rear pivot pins.
View product >>>
#301042Wheel axle Rear (2)
A pair of rear wheel axles.
View product >>>
#301045Body support bracket rear carbon
Rear 3mm carbon body support bracket.
View product >>>
#301046Body post rear alu (2)
A pair of rear aluminium body posts.
View product >>>
#301047Brake Lever
Composite brake lever and insert for Serpent F180.
View product >>>
#301048Carbon brake pad support plate
Carbon brake pad support plate.
View product >>>
#301049Brake Eccenter
Composite brake eccenter for F180.
View product >>>
#301053Pulley 23T
Composite 23T pulley for the Serpent F180.
View product >>>
#3010542-speed layshaft
2-speed layshaft for Serpent F180.
View product >>>
#301062Centax Flywheel F180
Centax II Flywheel for Serpent F180.
View product >>>
#301063Gear Differential rear 50T
Rear 50T Gear Differential.
View product >>>
#301064Gear diff case / pulley L & R
Composite gear differential case set with pulley.
View product >>>
#301065Outdrives Gear diff (2)
A pair of Gear diff outdrives.
View product >>>
#301066Wing rear nylon parts
Complete rear wing set, includes all the composite parts.
View product >>>
#301067Diffuser Nylon
Nylon rear diffuser for the Serpent F180.
View product >>>
#301068Bracket rear wing alu (2)
A pair of aluminium rear wing brackets.
View product >>>
#301071Wheel front black (2)
Pair of front wheels for use with the F180 rubber tires.
View product >>>
#301072Wheel rear black (2)
Pair of rear wheels for use with the F180 rubber tires.
View product >>>
#301077Throttle servo lever 23T/24T/25T
Throttle servo levers for 3 different servos 23T/24T/25T
View product >>>
#301078Cable holder
Anodised aluminium cable holder.
View product >>>
#301079Suspension pivot balls steel (4)
A set of 4 steel suspension pivot balls.
View product >>>
#301080Battery Case
Composite Battery holder.
View product >>>
#301082Throttle receiver mount
Composite throttle servo and receiver / antenna mount for Serpent F180.
View product >>>
#301098Body-post front alu
Aluminium front body post.
View product >>>
#301099Bushing Rocker (2)
A pair of aluminium rocker bushings.
View product >>>
#301101Brake pin 3x10 (4)
A set of 4 brake pins 3x10
View product >>>
#301104Rotostart System
Hand held Rotostart system for the F180 as well as other engines that use the Rotostart system. Come supplied with the starting shaft.
View product >>>
#301902Tyre front grooved FC2 med (2)
Pair of front grooved rubber tyres for the Serpent F180.
View product >>>
#301907Tyre rear grooved RC2 med (2)
Pair of rear grooved rubber tyres for the Serpent F180.
View product >>>
#301951Inserts front foam FF1 black (2)
Pair of black front foam inserts for the F180.
View product >>>
#6503Cone flywheel 7mm long (3)
Universal flywheel cone, set of 3.
View product >>>
#6571Engine mounts c.s.h. screws (4)
Set of c.s.h. screws M5x12 and alu. countersunk washers. Used with Vector and Impact engine mounts.
View product >>>
#6582Centax clutchnut
Replacement parts for Centax clutch system.
View product >>>
#6583Centax pre-load adjusting nut
Replacement parts for Centax clutch system.
View product >>>
#6584Centax spring cup
Replacement parts for Centax clutch system.
View product >>>
#6587Centax clutch shoe black
Graphite Centax clutch shoe, provides softer engaging of the clutch than the yellow type (6587N). Mainly used in 1/10 scale racing.
View product >>>
#8024032-speed spring (2)
Pair of gearbox tension springs for use in the Serpent gearbox.
View product >>>
#802605Gear-axle set 4+2+2
Gear axle set for the optional rear gear differential. Contains 2 large gears, 4 satellite gear, 2 gear axles and 4 shims.
View product >>>
#802608Spares set geardiff (15)
Spares set for optional rear gear diff. Contains 4 fastening screws, 1 large O-ring, 2 small o-rings, 2 roll pins and 6 shims.
View product >>>
#803198Adjusting nut nylon for 8.5mm ball (10)
Set of 10 nylon end play adjusting nuts for use with the cars 8.5mm pivot balls.
View product >>>
#808346Pivot-balls 8.5mm (2)
Universal pivot balls. Used in all Impulse, Impact 2 / M2 and Vector models on front and rear suspension.
View product >>>
#901235Push-rods 54mm shocks
Tie-rods 54mm, heat treated steel. Left and right threaded. Used as pushrods on front and rear suspension, between lower suspension arm and rockers+D51. Set of 2.
View product >>>
#901355Brake pads, set of 4
Brake pads, made of special friction material, blue. Must be glued onto steel brake plates 901356. Set of 4.
View product >>>
#901356Steel brake plates
VETEQ brake plates made of spring steel. Interchangeable with Vector, Impact and Impulse brake plates. Old style Vector and Impact brake plates (9602) cannot be used on VETEQ. Set of 2.
View product >>>
#902128Track-rod steel 1/8 (2)
Track rod set for Serpent 1/8 in Serpent spring steel.
View product >>>
#902133Servo-saver shaft inner
Steel shaft upon which the Serpent 950 servo saver pivots.
View product >>>
#902134Servo-saver shaft outer
Aluminium Serpent 950 servo saver shaft with thread for servo saver pre load adjusting nut.
View product >>>
#902135Servo-saver nut
Aluminum Serpent 950 servo saver pre load adjusting nut.
View product >>>
#902136Servo-saver spring
Servo saver spring for centrally mounted Serpent 950 servo saver.
View product >>>
#902137Servo saver spring 2.0 gold
Serpent 950 servo saver spring. Slightly softer than the standard 2.1mm silver spring.
View product >>>
#902138Trackrod M3x23 (2)
Trackrod M3x23 (2)
View product >>>
#902139Servo saver spring 2.2 black
Serpent 950 servo saver spring. Slightly harder than the standard 2.1mm silver spring.
View product >>>
#902308Pivot pins 3.5 lower rear (2)
Set of 2 3.5mm diameter lower rear pivot pins. Made from special spring steel.
View product >>>
#9024102-speed gearbox LC (no shaft incl)
Complete LC gearbox set for use with all Serpent cars. Requires the cars respective LC gearbox shaft to be mounted.
View product >>>
#902411Drive-flange alu with owb
Aluminum drive flange for the new LC gearbox. Used to mount the 1st gear, comes complete with one way bearing. Use special formula #1680 One-Way Lub to lubricate the one-way bearing after each hour of use to avoid locking up or slipping.
View product >>>
#902412Adaptor 2-speed LC
Steel adaptor for mounting gearbox shoes. Hardened and precision grinded for perfect functioning of the one-way bearing.
View product >>>
#902413Carrier 2nd Gear LC
Ultra lightweight aluminium, 2nd speed gear carrier for LC Gearbox.
View product >>>
#9024162-speed shoe-set LC II
A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only.
View product >>>
#9024442-speed gear 44T (2ND) LC
Composite 44T 2nd gear for use with new LC Gearbox.
View product >>>
#9024452-speed gear 45T (2ND) LC
Composite 45T 2nd gear for use with new LC Gearbox.
View product >>>
#9024462-speed gear 46T (2ND) LC
Composite 46T 2nd gear for use with new LC Gearbox.
View product >>>
#9024472-speed gear 47T (1ST) LC
47T composite 1st gear for new LC gearbox.
View product >>>
#9024482-speed gear 48T (1ST) LC
48T composite 1st gear for new LC gearbox.
View product >>>
#9024492-speed gear 49T (1ST) LC
49T composite 1st gear for new LC gearbox.
View product >>>
#903125Upright RR
Rear composite upright for use on the Serpent 960. Suitable for both the left and right side of the car.
View product >>>
#903126Spacer upright alu (2)
Pair of rear upright spacers for use on the wheel axles.
View product >>>
#903135Mount-supports servo
Full set of servo mount supports.
View product >>>
#903156Driveshaft rear 62mm (2)
Pair of 2 Hudy spring steel driveshafts for the rear of the Serpent 960.
View product >>>
#903164Shock-set RCC front (2)
Complete pre assembled short RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touring cars.
View product >>>
#903166Shock rod short (2)
A set of 2 short shock rods for use in RCC shocks.
View product >>>
#903168Nylon parts frame shocks RCC
Complete set (4) of composite RCC shock absorber components.
View product >>>
#903169Insert shock (2)
A set of 2 RCC composite shock absorber inserts. New: Use 903336 and 903332 instead
View product >>>
#903171O-ring 10x1 (4)
Set of 4 o-rings for use in the RCC shock absorbers.
View product >>>
#903175Foam insert (4)
Set of 4 foam inserts for use in the RCC shock absorbers.
View product >>>
#903177Nut shock alu (2)
Set of 2 anodised aluminium shock absorber nuts. Suitable for the RCC shock absorbers.
View product >>>
#903186C + G Clip + washer RCC shocks (12)
Set of 4 C-clips (R2), G-clips and nylon washers, suitable for Serpents RCC shocks.
View product >>>
#903200O-ring 3.3 x 1.5 RCC shocks (10)
Set of 10 purple o-rings for use in the RCC shock absorbers.
View product >>>
#903211Servo saver set with adjustable Ackerman
Composite plastic servo saver set with adjustable Ackerman for use with the Serpent 966, 960, 950R & 950. Comes complete with servo levers and mounting screws.
View product >>>
#903212Centax support disk alu SPP
Aluminium support disk for use in the Centax and Centax II.
View product >>>
#903230Ball joints 5.8mm frame
Set of twenty 5.8mm composite ball joints.
View product >>>
#903333 X-ring RCC 2009 Shock (10)
X-Ring for the 2009 RCC Shock
View product >>>
#903334Shock-set RCC-X short (2)
Complete pre assembled short RCC-X shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars.
View product >>>
#903335Shock-set RCC-X long (2)
Complete pre assembled long RCC shock absorbers. Comes with optional 1, 2 & 4 hole pistons. The 2009 version RCC-X has a better seal / support package. The shockrod is supported better with the delrin bushing, and a new design x-ring, made of a special silicone rubber (instead of an o-ring) provides a better seal at less friction. A new mould for the nylon parts has been made, so also the nylon parts of the shocks are improved, both pistons and ball-joints too. Supersmooth shocks ! Fits all 1/8 and 1/10 gas-cars, but also 1/10 electric touringcars.
View product >>>
#903336903336 Insert RCC 2009 shock (2)
Shock bottom for the X-Ring for the 2009 RCC shock
View product >>>
#909224Wheel axle shims (2)
Set of 2 shims 12x18x0.3mm to protect wheel axle bearings.
View product >>>
#909336Rear anti-roll bar blade (conical)
Replacement blade for adjustable rear anti-roll bar.
View product >>>
#909373Drive-belt Kevlar 8mm
Kevlar reinforced timingbelt for rear transmission of Vector all Specs. Width 8mm.
View product >>>
#909510Centax-II clutch-set (excl. Flywheel)
Complete Centax-II clutch set with everything needed to mount it to your engine with the exception of the flywheel. All bearings, shoes, shims and a bell housing with a 16/19 gear ratio is supplied.
View product >>>
#909512Centax-II clutch-housing universal
Ultra strong spring steel Centax-II clutch bell housing.
View product >>>
#909514Centax II bearing spacer 5x7
Aluminium spacer for use in the Centax-II clutch system.
View product >>>
#909515Centax II centrifugal shoes (3)
A set of 3 carbon flyweights for use in both Centax-I & II clutch systems.
View product >>>
#909516Centax II Spacer Thrustbearing
Sapcer for use with Centax-II clutch system. Comes complete with screw.
View product >>>
#909518Centax coilspring 1.8
1.8mm diameter spring steel coil spring for use with the Centax-I and Centax-II clutch systems for use with 3.5cc/.21 engines. A softer version is also available (#6586). Replaced by #909520
View product >>>
#909519Centax II shims 5 x 10 x 0.3 (2) + 0.5 (1)
Set of 3 Centax-II shims in two sizes 0.3 (2) and 0.5 (1).
View product >>>
#909520Centax II / III spring 1.8 (10mm)
Optional 10mm Centax II spring.
View product >>>
#909555Centax gear-pinion alu 15t
Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability.
View product >>>
#909556Centax gear-pinion alu. 16t
Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability.
View product >>>
#909558Centax gear-pinion alu. 18t
Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability.
View product >>>
#909559Centax gear-pinion alu. 19t
Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability.
View product >>>
#909560Centax gear-pinion alu. 20t
Precision pinion for Centax clutch, made of light-weight 7075-T6 aluminium, hard-anodized to optimize durability.
View product >>>
#9611Steel brake disks (2) MK-2
Brake discs for all 1/8 and 1/10 scale Serpent cars. Set of 2.
View product >>>