> 1/8 · Formula · 1/8 offroad · 1/10 200mm · 1/10 235mm

> Wheel-axles front CV set (#902280) - DISCONTINUED

> Description · Images (3) · Downloads (1) · Spares (3)


Product Type:
Gas Cars > 1/8
Suitable for:
Serpent 960 1/8 scale 4WD
Serpent 960 07 1/8 scale 4WD
Serpent 960 08 1/8 scale 4WD

Complete set of front CVDs (constant velocity drive) for the Serpent 950 / 950R. Set includes wheel axles and drive shafts and all parts required to complete the set as well as fixed wheel and quick release wheel mounting methods.

Related products

> Description

Newly available from Serpent is this ultra efficient and performance-enhancing front CVD (constant velocity drives) set. Designed for use on the Serpent 950 and 950R the power delivery to the wheels has been improved because the drive shafts are permanently attached to the wheel axles. Apart from the added benefit that you will no longer lose drive shafts in the case of an impact, also the wear on parts has been greatly reduced due to the fact that the shafts no longer move around in their drive slots and due to the ultra high quality steel used on all the parts.

Another feature of this set is the new wheel axles that allow the racer to use both the supplied quick release and fixed wheel mounting system on the same wheel axle. The aluminium wheel nuts use rubber o-rings to ensure that they don’t come lose and allow the wheel to spin truer. The user can change between both systems in a very short time and can easily install the shorter than original quick release springs for longer races that may require a tire stop.

Additional Information

Comes in a set of two and includes all the necessary parts to complete installation. This set also comes with full instructions.